danew Surnaturel R500 User manual

1
USER
GUIDE

2
Thank you for purchasing a Danew product. Your Surnaturel R500 has been designed to oer you a unique gaming experience
on a smartphone. Before using the device, read carefully the operation instructions presented in this manual. It aims at familiarizing
you with the technical features of your R500 in order to make operation easier.
NOTE : All information presented in this manual and on the box were current at the time of printing. However, as we are per-
manently enhancing our products through software updates, this manual and the box might not present all the functions of your
actual product.
Pictures are for illustration purpose only and are not contract-binding.

3

4
  INTRODUCTION
P.6
P.8
Features
Buttons & Device parts
Insert SIM card
Charge the battery
Make or answer a call
Send SMS & MMS
Keys
Memory Card
Switch-on
Switch-o
Lock screen & Power saving mode
Home screen and settings
Using the home screen
Sections of the home screen
USB connection
Using the touch screen
Storage & file management
Configuring your GoogleTM account
Fingerprint reader
P.8
P.9
P.10
P.11
P.12
P.13
P.14
P.14
P.14
P.17
P. 2 2
P. 2 7
P. 2 9
P. 2 9
P.32
P.33
P.35
P.6
P.7
CONTENTS
  GETTING STARTED

5
Wifi
Bluetooth
Dual SIM
P.36
P.37
P.37
P.36
P.38
P.39
  NETWORKING
  SUPPORT  WARRANTY
  SAFETY INSTRUCTIONS

6
INTRODUCTION
1
FEATURES
Screen
Resolution
Processor
RAM
Internal memory
Network
Camera / Webcam
Battery
Speaker
G-sensor
Connectors
Dimensions
Weight
IPS 2.5D Gorilla Glass 4, 5’’
Full HD 1920 x 1080 px
64 bits MT6753 OctaCore 1.5Ghz
3 Go
32 Go
Wifi 802.11 b/g/n, Bluetooth 4.0
13 Mpx Sony IMX214 - f/2.0 / 8 Mpx Samsung
2700 mAh
1W / 103dB
G-sensor / Light-sensor / Proximity Sensor / Geomagnetic sensor
3.5 mm audio jack / Micro USB type C
141.4 x 69.3 x 7.4 mm
142 g

7
BUTTONS  DEVICE PARTS
3,5 mm
audio jack
USB Connector TypeC
(charge & PC connection)
Touch
screen
Flash Led
Fingerprint reader
Camera lens
Volume
keys
Webcam
Power
ON/OFF
Overview
Menu
principal
Back

8
GETTING STARTED
2
The phone can operate two SIM cards (not supplied)
simultaneously or independently.
INSERT THE SIM CARD
Insert the SIM card(s),
Note : the right slot enables to insert
either a memory card or a Nano SIM
card.
Micro SIM Nano SIM
Note : If your SIM is configured with
a PIN code, enter it at start up
then confirm by clicking on :

9
CHARGE THE BATTERY
To power or charge the phone, use only the universal charger supplied in the box (5 V 2A model). The
use of unapproved charger presents the risk of electric shock or burns. if the device is damaged due to
improper use, the warranty will be void.
We recommend that you fully charge the battery for the first three charge times.
The battery should never be allowed to discharge fully, full discharges (under 10%) cause damage to the
battery and wears is o prematurely. Since the battery is lithium-ion, you can charge it partially without
a risk of damage.
Note: To avoid electrical damage, use only the universal charger supplied or a genuine Danew charger
to cahrge the device.

10
MAKE OR ANSWER A CALL
ANSWER A CALL
The phone enables you to make or answer a call, use options during a call and customize these functions
to better fit your needs.
MAKE A CALL
Open the dial screen, dial a telephone number and press .
When you receive a call, drag
the telephone icon to the right.
> >