danew DSLIDE 1017 User manual
USER
GUIDE
Thank you for purchasing a Danew product. Your DSlide Has been designed to
oer you a unique game experience on a touch tablet.
Before using your device, read carefully the use instructions exposed throughout
this manual.
It aims at familiarizing you with the technical features of your DSlide in order to
make its use easier.
NOTE : All information presented in this manual and on the box were current
at the time of printing. However, as we are permanently enhancing our products
through software updates, this manual and the box might not present all the
functions of your actual product.
Pictures are for illustration purpose only and are not contract-binding.
2
3
DSLIDE 1017
INTRODUCTION
GETTING STARTED
INTERNET
P.
P.
P.
Features
Buttons and device parts
P.6
P.7
P.8
P.9
P.11
P.13
P.15
P.16
P.18
P.19
P. 2 0
Switch-on / Switch-o
Lock screen and power saving mode
Home screen and settings
Using the home screen
Sections and shortcuts on the home screen
USB connection
Reset
Using the touch screen
Data storage and file management
Network connections
Wi-Fi configuration
CONTENTS
4
TROUBLESHOOTING
SUPPORT WARRANTY
P.
P.
P. 2 0
P. 2 1
Ethernet connection
Internet research
Internet navigation
Bluetooth
5
INTRODUCTION
Touch capacitive 10.1’’ IPS
1280 x 800 px
RK 3126 Quadcore 1.3GHz
1 GB DDR3
32 GB Flash
Wifi 802.11 b/g /n
2 Mpx / 2 Mpx
5000m Ah Li-polymer
Formats supported by Android™
FM radio tuner
2 x 1 Watt
Ye s
Micro USB OTG function
Micro SDHC card port
3.5 mm audio output jack
240.8 x 167.5 x 8.7 mm
524 g
Screen
Resolution
Processor
RAM
Internal memory
Network
Camera / Webcam
Battery
Multimedia
Speaker
G-sensor
Connectors
Dimensions
Weight
FEATURES
6
Micro SD Port
7
BUTTONS PARTS OF THE DEVICE
3.5 Audio Jack
ON/
OFF
Micro USB
Microphone
Volume
+/ -
Speaker Speaker
Webcam
Camera
8
GETTING STARTED
1
2
Long pressing the ON/OFF button (3 seconds) will start your DSlide. The screen
plays an animation of Danew’s logo before loading the Android interface.
To switch o your DSlide, press the ON/OFF button (for approximately 3
seconds), screen switched on, the following screen (Fig 1) will appear :
When the battery is low, the device will automatically shutdown to save power.
Switch-on
Switch-o
9
3A) Lock screen
When the device is on, short pressing the ON/OFF button will switch-o the
screen and enable the power saving mode or lock (after a period of inactivity, the
screen will automatically shutdown).
When this mode is enabled, the applications in use will not be closed.
The Wifi connection is automatically stopped in standby mode. It will
automatically be restored when you leave the screen saver.
Pressing again the ON/OFF button will display the lock screen. To unlock the
DSlide, slide your finger upwards.
Lock screen & power saving mode
10
B) Power saving
To optimize your tablet’s battery life, we recommend to follow the following tips :
•Screen
Do not use a 100% luminosity. The screen of your tablet is an energy consuming part
(when it is switched on).
In most cases, a 50% luminosity allows a suciently comfortable operation. To
change the luminosity, go to the point 6 of this manual.
To optimize the battery, it is also recommended to set the automatic standby mode
(in the case of inactivity). The shorter this period is, the better your battery life. To set
the standby period, go to the « Settings/Display/Sleep » menu.
•WiFi
The wifi connection is also an energy consuming part of your device. To optimize
your battery life, it is recommended to disable the Wifi connection when it is not
being used. For example, when your are watching a video of playing sound on your
tablet, you should disable the Wifi connection, you will then save up to 30% of your
battery life.
Click here to
enable/disable the
Wifi connection
11
4Home screen & Settings
Back Button
Application Button
Home Button
Open application
Volume - Button
Volume + Button
12
Enables to configure Wifi
settings View your Wifi Data usage
Brightness/Sleep/Wallpaper
Storage devices management &
memory status
Applications management
Volume & sound environment
settings
View the battery power
Accounts management
(Gmail, Facebook ...)
Date/Time/Timezone
settings
Information on the firmware
version
Configure security settings of
your tablet
Configure Language/Keyboards/
Voice research
Enable or disable Geolocalisa-
tion services
13
5Using the home screen
a) When you are in the home screen, you can rotate your DSlide 90°. The
display will automatically adjust by switching from Landscape to Portrait and
vice-versa. You can display applications (shortcuts, Widgets…) on the home
screen.
b) Clicking on the “applications menu” button will display the list of
applications installed on the tablet.
14
c) Install shortcuts / Widgets on the main interface screens.
A. To install shortcuts :
Drag & drop icons from the « applications » section to the main interface screen.
To do so, open the applications menu, then click and hold the icon pressed with
your finger.
B. To install Widgets :
Drag & drop icons from the « Widgets » section to the main interface screen. To
do so, on the main screen, click and hold your fingertip until the Widget menu
(see below) appears, then select the Widget with your fingertip holding down.
To delete an item from the desktop, click on the icon (or Widget) to select then
move the icon to the icon of the «Cross» format as shown below.
15
d) To close running applications
Click on the “Open application(s) ” to view the list of running applications. To
close the application(s), hold your fingertip and slide the small application window
(to the right or the left).
6Sections & shortcuts on the home screen
The home screen « Home » allows you to operate your tablet in dierent ways.
1) Note at the bottom of the screen an area with virtual shortcuts (Volume -/+ ;
Open application(s) ; Home ; Back)
2) A fixed dock where you can place your favorite applications for quick access.
3) The clock on the upper right corner of the screen. Press and hold the clock,
and slide downwards to view 2 sections.
Sliding downwards for the first time will display the notifications section. Slide
downwards again to view the quick settings section (Wifi ; Brightness ; Rotation
; Settings ; Battery level ; Airplane mode...).
16
To delete a notification, slide it to the right or the left.
7
8
9
USB Connection
Reset
Using the touch screen
When the DSlide is switched on and connected to a computer, a USB icon
appears on the notifications bar in the upper right corner.
Connecting to a computer enables you to synchronize content between your
device and your computer. You can also view the contents of the internal
memory and the memory card.
When the DSlide is not responding to your commands, it is likely that the system
encountered a problem. A system reset is then necessary. Using a thin object,
press the Reset button until the device restarts (your data will not be deleted).
Your DSlide is equipped with a fully touch interface. The basic movements are
explained below.
17
Select
Click once on an application, menu or option to run or
select them.
Hold
Maintain your finger pressing a selected item on the screen
for more than 2 seconds.
Move
Move a selected item on the screen.
Double-click
Click twice and quickly on an item on the screen.
Scroll
Move the finger quickly in the direction of the desired
movement.
Zoom
Place your thumb and forefinger on the screen.
Separate to zoom in and bring closer to zoom out.
18
10 Storage & File management
There are many applications called « File Browsers » that enable you to
manage your files (audio, video, documents and photos).
Android supports dierent storage methods like memory cards, internal memory as
well as USB devices.
Applications are installed to the internal memory by default which provides the
biggest storage capacity.
You can use this space to create folders and organize your personal files.
The file manager also enables you to manage contents located on a memory card
(microSD) as well as a USB device.
Besides the internal memory, you can also create folders to organize your files.
Internal Memory
SD memory card
19
INTERNET
1Network Connections
Your DSlide can connect to Wi-Fi b/g/n networks as well as Ethernet networks
(option : needs a Usb Ethernet adapter sold separately)
To view the settings, click on the « Application menu » button then
select “Settings”
On the new screen, click on “Wireless and networks” to access the connection
menu.
20
2
3
4
Wi-Fi Configuration
Ethernet Connection
Internet
Click on «Wi-Fi» to access the Wi-Fi interface of the DSlide.
On this new interface, the Wi-Fi module starts a scan to reasearch available
Wi-Fi networks.
The list of nearby detected networks is displayed on the right, select the
Wi-Fi network corresponding to your router by clicking on its name. An icon
indicating the power of the signal is displayed on the right of the network
name.
Once the network name selected, a new window is displayed and prompts for
a manual entry of the password.
Your DSlide can also connect to Internet through a Ethernet cable. You need
a Usb Ethernet adapter to connect to the USB port of your tablet (sold
separately). Once connected to Ethernet, the configuration will be performed
automatically.
Once the connection established, you can surf the internet. To do that,
return to the main interface. Click on “Google Search” to enable the virtual
keyboard.
Click on «Login»
Once the connection established, the
Wi-Fi icon appears in the task bar.
Table of contents
Other danew Tablet manuals
