Data Video PTC-140 User manual

PTC-140

2
Table of Contents
FCC COMPLIANCE STATEMENT........................................................................... 4
WARNINGS AND PRECAUTIONS ......................................................................... 4
WARRANTY ........................................................................................................ 5
STANDARD WARRANTY ......................................................................................... 5
THREE YEAR WARRANTY ....................................................................................... 6
DISPOSAL ........................................................................................................... 6
1. PRODUCT OVERVIEW................................................................................. 8
FEATURES.......................................................................................................... 8
2. LOCATION AND FUNCTION OF PARTS ........................................................ 9
3. BASIC SETUP ............................................................................................ 13
3.1 POWER-ON INITIALIZATION ..................................................................... 13
3.2 VIDEO OUTPUT .................................................................................... 13
Ethernet Port............................................................................................ 13
HDMI Video Output .................................................................................. 14
3G-SDI Video Output................................................................................. 14
4. REMOTE CONTROL AND ON-SCREEN MENU............................................. 15
4.1 REMOTE CONTROL FUNCTIONS ................................................................ 15
4.2 ON-SCREEN MENU............................................................................... 20
5. INSTALLATION INSTRUCTIONS................................................................. 29
6. NETWORK CONNECTION.......................................................................... 33
6.1 DHCP MODE ...................................................................................... 34
6.2 STATIC IP............................................................................................ 36
6.3 DVIP................................................................................................. 36
7. WEB USER INTERFACE.............................................................................. 39
7.1 PREVIEW ............................................................................................ 39
Control Functions...................................................................................... 39
Preset....................................................................................................... 41
7.2 CONFIGURATION................................................................................... 42

3
Audio Configure........................................................................................ 42
Video Configure........................................................................................ 44
Network Configure.................................................................................... 64
System Configure...................................................................................... 66
8. REMOTE CONTROL PORT PINOUTS .......................................................... 70
9. FIRMWARE UPDATE................................................................................. 72
REQUIREMENTS ................................................................................................ 72
PROCEDURE ..................................................................................................... 72
10. FREQUENTLY-ASKED QUESTIONS......................................................... 73
11. DIMENSIONS........................................................................................ 74
12. SPECIFICATIONS................................................................................... 75
SERVICE & SUPPORT......................................................................................... 77
Disclaimer of Product and Services
The information offered in this instruction manual is intended as a guide only. At
all times, Datavideo Technologies will try to give correct, complete and suitable
information. However, Datavideo Technologies cannot exclude that some
information in this manual, from time to time, may not be correct or may be
incomplete. This manual may contain typing errors, omissions or incorrect
information. Datavideo Technologies always recommend that you double check
the information in this document for accuracy before making any purchase
decision or using the product. Datavideo Technologies is not responsible for any
omissions or errors, or for any subsequent loss or damage caused by using the
information contained within this manual. Further advice on the content of this
manual or on the product can be obtained by contacting your local Datavideo
Office or dealer.

4
FCC Compliance Statement
This device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation.
Warnings and Precautions
1. Read all of these warnings and save them for later reference.
2. Follow all warnings and instructions marked on this unit.
3. Unplug this unit from the wall outlet before cleaning. Do not use liquid or
aerosol cleaners. Use a damp cloth for cleaning.
4. Do not use this unit in or near water.
5. Do not place this unit on an unstable cart, stand, or table. The unit may fall,
causing serious damage.
6. Slots and openings on the cabinet top, back, and bottom are provided for
ventilation. To ensure safe and reliable operation of this unit, and to protect
it from overheating, do not block or cover these openings. Do not place this
unit on a bed, sofa, rug, or similar surface, as the ventilation openings on the
bottom of the cabinet will be blocked. This unit should never be placed near
or over a heat register or radiator. This unit should not be placed in a built-in
installation unless proper ventilation is provided.
7. This product should only be operated from the type of power source
indicated on the marking label of the AC adapter. If you are not sure of the
type of power available, consult your Datavideo dealer or your local power
company.
8. Do not allow anything to rest on the power cord. Do not locate this unit
where the power cord will be walked on, rolled over, or otherwise stressed.
9. If an extension cord must be used with this unit, make sure that the total of
the ampere ratings on the products plugged into the extension cord do not
exceed the extension cord’s rating.

5
10. Make sure that the total amperes of all the units that are plugged into a
single wall outlet do not exceed 15 amperes.
11. Never push objects of any kind into this unit through the cabinet ventilation
slots, as they may touch dangerous voltage points or short out parts that
could result in risk of fire or electric shock. Never spill liquid of any kind onto
or into this unit.
12. Except as specifically explained elsewhere in this manual, do not attempt to
service this product yourself. Opening or removing covers that are marked
“Do Not Remove” may expose you to dangerous voltage points or other risks,
and will void your warranty. Refer all service issues to qualified service
personnel.
13. Unplug this product from the wall outlet and refer to qualified service
personnel under the following conditions:
a. When the power cord is damaged or frayed;
b. When liquid has spilled into the unit;
c. When the product has been exposed to rain or water;
d. When the product does not operate normally under normal operating
conditions. Adjust only those controls that are covered by the operating
instructions in this manual; improper adjustment of other controls may
result in damage to the unit and may often require extensive work by a
qualified technician to restore the unit to normal operation;
e. When the product has been dropped or the cabinet has been damaged;
f. When the product exhibits a distinct change in performance, indicating a
need for service.
Warranty
Standard Warranty
Datavideo equipment are guaranteed against any manufacturing defects for
one year from the date of purchase.
The original purchase invoice or other documentary evidence should be
supplied at the time of any request for repair under warranty.
The product warranty period begins on the purchase date. If the purchase
date is unknown, the product warranty period begins on the thirtieth day
after shipment from a Datavideo office.

6
All non-Datavideo manufactured products (product without Datavideo logo)
have only one year warranty from the date of purchase.
Damage caused by accident, misuse, unauthorized repairs, sand, grit or
water is not covered under warranty.
Viruses and malware infections on the computer systems are not covered
under warranty.
Any errors that are caused by unauthorized third-party software installations,
which are not required by our computer systems, are not covered under
warranty.
All mail or transportation costs including insurance are at the expense of the
owner.
All other claims of any nature are not covered.
All accessories including headphones, cables, and batteries are not covered
under warranty.
Warranty only valid in the country or region of purchase.
Your statutory rights are not affected.
Three Year Warranty
All Datavideo products purchased after July 1st, 2017
are qualified for a free two years extension to the
standard warranty, providing the product is registered
with Datavideo within 30 days of purchase.
Certain parts with limited lifetime expectancy such as LCD panels, DVD drives,
Hard Drive, Solid State Drive, SD Card, USB Thumb Drive, Lighting, Camera
module, PCIe Card are covered for 1 year.
The three-year warranty must be registered on Datavideo's official website
or with your local Datavideo office or one of its authorized distributors within
30 days of purchase.
Disposal
For EU Customers only - WEEE Marking
This symbol on the product or on its packaging indicates that this
product must not be disposed of with your other household
waste. Instead, it is your responsibility to dispose of your waste
equipment by handing it over to a designated collection point for

7
the recycling of waste electrical and electronic equipment. The separate
collection and recycling of your waste equipment at the time of disposal will help
to conserve natural resources and ensure that it is recycled in a manner that
protects human health and the environment. For more information about where
you can drop off your waste equipment for recycling, please contact your local
city office, your household waste disposal service or the shop where you
purchased the product.
CE Marking is the symbol as shown on the left of this page. The
letters "CE" are the abbreviation of French phrase "Conformité
Européene" which literally means "European Conformity". The
term initially used was "EC Mark" and it was officially replaced
by "CE Marking" in the Directive 93/68/EEC in 1993. "CE Marking" is now used in
all EU official documents.

8
1. Product Overview
The PTC-140 is a low-cost SDI/HDMI PTZ camera featuring 20x optical zoom and
10x digital zoom.
The PTC-140 is also an IP camera supporting H.264 /H.265 video compression and
dual stream outputs.
Features
1/2.8 inch CMOS sensor. Resolution is up to 1920x1080 with frame rate up to
60fps.
Low Noise CMOS effectively ensures high SNR of camera video. Advanced
2D/3D noise reduction technology is also used to further reduce the noise,
while ensuring image sharpness.
Audio Input Interface
Supports AAC, MP3 and PCM audio coding with sampling frequencies of
16000, 32000, 44100 and 48000.
Supports H.264/H.265 video compressions of resolution up to 1920x1080
with frame rate up to 60fps as well as AAC, MP3 and PCM audio
compressions.
Supports multiple network protocols such as RTSP and RTMP allowing you to
easily link to any streaming media servers.

9
2. Location and Function of Parts
Front of Camera
1
Lens
Built-in 1/2.8” 2.07M Pixel CMOS HD color camera with white balance
control, backlight compensation, automatic gain and etc.
2
Tally LED
Tally lamp will be turned ON upon receiving the ON signal.
3
Sensor for Remote Control
Remote control IR receiver

10
Rear of Camera
1
Power Input
DC in socket connects the supplied 12V PSU. The connection can be
secured by screwing the outer fastening ring of the DC In plug to the
socket.
2
LAN Port
This port allows you to establish network connection with the camera.
Connect an Ethernet cable from this port to the LAN port of a PC in order
to monitor the camera video from the web user interface. The LAN port
also allows you to stream the camera video using various streaming
protocols.
7
6
1
2
3
5
4