Data Video BC-200T User manual

BC-200T
4K HDBaseT BLOCK
CAMERA
Instruction Manual

2
Table of Contents
FCC COMPLIANCE STATEMENT...................................... 4
WARNINGS AND PRECAUTIONS .................................... 4
WARRANTY................................................................... 6
STANDARD WARRANTY ......................................................6
THREE YEAR WARRANTY.....................................................6
DISPOSAL ...................................................................... 7
1. INTRODUCTION......................................................... 8
FEATURES ........................................................................8
2. SYSTEM DIAGRAM .................................................. 10
3. CONNECTIONS......................................................... 11
CAMERA FRONT VIEW......................................................11
CAMERA REAR PANEL ......................................................12
RECEIVER BOX FRONT PANEL.............................................15
RECEIVER BOX REAR PANEL...............................................16
4. IR REMOTE CONTROL .............................................. 17
5. OSD MENU OPTIONS............................................... 22
6. DIP SWITCH SETTINGS ............................................. 30
7. DVIP CONFIGURATION TOOL................................... 31

3
DVIP CONFIGURATION TOOL SETTING ................................31
User Interface.........................................................31
Device Search .........................................................32
Clearing Device List ................................................33
Detailed Device Network Information....................34
Modify Device Information and Write to Device....34
Switch to Other Network Interface ........................35
Language Selection ................................................36
8. RMC-180 CAMERA CONTROL UNIT.......................... 37
DIRECT CONNECTION TO CAMERA ......................................37
CONNECTION TO CAMERA VIA HBT-11 ...............................38
9. FIRMWARE UPGRADE ............................................. 39
10. DIMENSIONS ......................................................... 40
11. SPECIFICATIONS .................................................... 42
SERVICE AND SUPPORT ............................................... 44
Disclaimer of Product & Services
The information offered in this instruction manual is intended as a guide only. At all
times, Datavideo Technologies will try to give correct, complete and suitable
information. However, Datavideo Technologies cannot exclude that some information in
this manual, from time to time, may not be correct or may be incomplete. This manual
may contain typing errors, omissions or incorrect information. Datavideo Technologies
always recommend that you double check the information in this document for
accuracy before making any purchase decision or using the product. Datavideo
Technologies is not responsible for any omissions or errors, or for any subsequent loss
or damage caused by using the information contained within this manual. Further
advice on the content of this manual or on the product can be obtained by contacting
your local Datavideo Office or dealer.

4
FCC Compliance Statement
This device complies with part 15 of the FCC rules. Operation is subject
to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including
interference that may cause undesired operation.
Warnings and Precautions
1. Read all of these warnings and save them for later
reference.
2. Follow all warnings and instructions marked on this unit.
3. Unplug this unit from the wall outlet before cleaning. Do not use
liquid or aerosol cleaners. Use a damp cloth for cleaning.
4. Do not use this unit in or near water.
5. Do not place this unit on an unstable cart, stand, or table. The unit
may fall, causing serious damage.
6. Slots and openings on the cabinet top, back, and bottom are
provided for ventilation. To ensure safe and reliable operation of
this unit, and to protect it from overheating, do not block or cover
these openings. Do not place this unit on a bed, sofa, rug, or similar
surface, as the ventilation openings on the bottom of the cabinet
will be blocked. This unit should never be placed near or over a
heat register or radiator. This unit should not be placed in a built-in
installation unless proper ventilation is provided.
7. This product should only be operated from the type of power
source indicated on the marking label of the AC adapter. If you are
not sure of the type of power available, consult your Datavideo
dealer or your local power company.
8. Do not allow anything to rest on the power cord. Do not locate this
unit where the power cord will be walked on, rolled over, or
otherwise stressed.

5
9. If an extension cord must be used with this unit, make sure that the
total of the ampere ratings on the products plugged into the
extension cord do not exceed the extension cord rating.
10. Make sure that the total amperes of all the units that are plugged
into a single wall outlet do not exceed 15 amperes.
11. Never push objects of any kind into this unit through the cabinet
ventilation slots, as they may touch dangerous voltage points or
short out parts that could result in risk of fire or electric shock.
Never spill liquid of any kind onto or into this unit.
12. Except as specifically explained elsewhere in this manual, do not
attempt to service this product yourself. Opening or removing
covers that are marked “Do Not Remove” may expose you to
dangerous voltage points or other risks, and will void your
warranty. Refer all service issues to qualified service personnel.
13. Unplug this product from the wall outlet and refer to qualified
service personnel under the following conditions:
a. When the power cord is damaged or frayed;
b. When liquid has spilled into the unit;
c. When the product has been exposed to rain or water;
d. When the product does not operate normally under normal
operating conditions. Adjust only those controls that are covered
by the operating instructions in this manual; improper
adjustment of other controls may result in damage to the unit
and may often require extensive work by a qualified technician
to restore the unit to normal operation;
e. When the product has been dropped or the cabinet has been
damaged;
f. When the product exhibits a distinct change in performance,
indicating a need for service.

6
Warranty
Standard Warranty
•Datavideo equipment are guaranteed against any manufacturing
defects for one year from the date of purchase.
•The original purchase invoice or other documentary evidence should
be supplied at the time of any request for repair under warranty.
•The product warranty period begins on the purchase date. If the
purchase date is unknown, the product warranty period begins on
the thirtieth day after shipment from a Datavideo office.
•Damage caused by accident, misuse, unauthorized repairs, sand, grit
or water is not covered under warranty.
•Viruses and malware infections on the computer systems are not
covered under warranty.
•Any errors that are caused by unauthorized third-party software
installations, which are not required by our computer systems, are
not covered under warranty.
•All mail or transportation costs including insurance are at the
expense of the owner.
•All other claims of any nature are not covered.
•All accessories including headphones, cables, and batteries are not
covered under warranty.
•Warranty only valid in the country or region of purchase.
•Your statutory rights are not affected.
Three Year Warranty
•All Datavideo products purchased after July 1st,
2017 are qualified for a free two years extension
to the standard warranty, providing the product
is registered with Datavideo within 30 days of
purchase.
•Certain parts with limited lifetime expectancy such as LCD panels,
DVD drives, Hard Drive, Solid State Drive, SD Card, USB Thumb Drive,
Lighting, Camera module, PCIe Card are covered for 1 year.

7
•The three-year warranty must be registered on Datavideo's official
website or with your local Datavideo office or one of its authorized
distributors within 30 days of purchase.
Disposal
For EU Customers only - WEEE Marking
This symbol on the product or on its packaging
indicates that this product must not be disposed of
with your other household waste. Instead, it is your
responsibility to dispose of your waste equipment
by handing it over to a designated collection point
for the recycling of waste electrical and electronic
equipment. The separate collection and recycling of your waste
equipment at the time of disposal will help to conserve natural
resources and ensure that it is recycled in a manner that protects
human health and the environment. For more information about where
you can drop off your waste equipment for recycling, please contact
your local city office, your household waste disposal service or the shop
where you purchased the product.
CE Marking is the symbol as shown on the left of
this page. The letters "CE" are the abbreviation of
French phrase "Conformité Européene" which
literally means "European Conformity". The term
initially used was "EC Mark" and it was officially
replaced by "CE Marking" in the Directive 93/68/EEC in 1993. "CE
Marking" is now used in all EU official documents.

8
1. Introduction
The BC-200T Block Camera is a 4K (3840x2160, UHD) camera with an
infra-red remote control. It can be used for UHD high quality shooting
in an environment where space is limited. The BC-200T equips the
HDBaseT technology to achieve long-distance ultra-high video/audio,
power, control, and Ethernet signals transmission over a single Ethernet
cable. The video resolutions supported are 2160p29.97 and 2160p25.
The BC-200T provides 12x optical focus and one HDMI video output
interface. A tally light indicator sits above the BC-200T camera lens. The
BC-200T also provides an HDBaseT receiver box, HBT-11, for users to
control the BC-200T remotely with one Ethernet cable only.
The BC-200T supports SONY VISCA control protocol so that the camera
can be controlled via RS-422 or DVIP interface.
Features
•Lens: 1/2.3” type Exmor R CMOS
•12x optical zoom, f = 3.9 mm (Wide) to 46.8 mm (Tele), F1.8 to
F2.0
•Supported 4K formats: (3,840 x 2,160, UHD)
2160p/29.97, 2160p/25
•Supported HD formats:
1080p59.94/50, 1080i59.94/50, 720p59.94/50
•Video Output: HDMI 1.4 x 1
•Digital Noise Reduction (DNR) to reduce the noise and enable
clearer image under low light condition.
•Tally LED Design (RS-422/ DVIP Operation)
•Supports SONY VISCA Protocol
•Supports DVIP and RS-422 Control Protocol
•Supports HDBaseT

9
•Users can save up to 10 preset camera settings for future use.
•Users can control up to 28 BC-200T devices simultaneously via the
RMC-180 PTZ camera remote control unit (including White
Balance, Focus, Iris, Shutter Speed, Zoom, Zoom Speed, Save
Preset, Recall Preset)
P.S. Shutter speed function must be set by the RMC-180 menu.

10
2. System Diagram