Datalogic GryphonD432 User manual

Gryphon™ D432/D412 Plus
Quick Reference Guide

Datalogic Scanning, Inc.
959 Terry Street
Eugene, Oregon 97402
Telephone: [phone]
Fax: [phone]
An Unpublished Work - All rights reserved. No part of the contents of this
documentation or the procedures described therein may be reproduced or
transmitted in any form or by any means without prior written permission of
Datalogic Scanning, Inc. or its subsidiaries or affiliates ("Datalogic" or
“Datalogic Scanning”). Owners of Datalogic products are hereby granted a
non-exclusive, revocable license to reproduce and transmit this
documentation for the purchaser's own internal business purposes.
Purchaser shall not remove or alter any proprietary notices, including
copyright notices, contained in this documentation and shall ensure that all
notices appear on any reproductions of the documentation.
Should future revisions of this manual be published, you can acquire printed
versions by contacting your Datalogic representative. Electronic versions
may either be downloadable from the Datalogic website
(www.scanning.datalogic.com) or provided on appropriate media. If you
visit our website and would like to make comments or suggestions about
this or other Datalogic publications, please let us know via the "Contact
Datalogic" page.
DISCLAIMER
Datalogic has taken reasonable measures to provide information in this
manual that is complete and accurate, however, Datalogic reserves the right
to change any specification at any time without prior notice. Datalogic is a
registered trademark of Datalogic S.p.A. in many countries and the
Datalogic logo is a trademark of Datalogic S.p.A. all licensed to Datalogic
Scanning, Inc. All other trademarks and trade names referred to herein are
property of their respective owners.

Quick Reference Guide 1
Table of Contents
Description ................................................................................................................................................3
Using the Gryphon™ D432/D412Plus .............................................................................................4
Indicators ...................................................................................................................................................6
LED Indicators ...............................................................................................................................6
Beeper ..............................................................................................................................................6
Good Read Spot ...........................................................................................................................6
Setup ...........................................................................................................................................................6
Connections .............................................................................................................................................7
Disconnecting the Cable .....................................................................................................................8
USB Interface Configuration ...............................................................................................................8
Start-Up ...........................................................................................................................................8
Interface Selection ...............................................................................................................................10
Wedge Keyboard Nationality ...........................................................................................................11
USB Keyboard Nationality .................................................................................................................12
Reading Parameters ............................................................................................................................13
Aiming System Delay ...............................................................................................................13
Good Read Spot Duration ......................................................................................................13
Default Configuration .........................................................................................................................14
Operating Test .......................................................................................................................................16
Technical Features ...............................................................................................................................17
Services and Support ..........................................................................................................................19
Warranty..............................................................................................................................19
Patents.................................................................................................................................19
Compliance .............................................................................................................................................20
FCC Compliance .........................................................................................................................20
Laser Safety ..................................................................................................................................21
LED Illuminator.................................................................................................................21
Aiming System..................................................................................................................21
Power Supply ..............................................................................................................................25
WEEE Compliance ......................................................................................................................26

2 Gryphon™ D432/412Plus
UPDATES AND LANGUAGE AVAILABILITY
UK/US
The latest drivers and documentation updates for this product are available
on Internet.
Log on to: www.scanning.datalogic.com
I
Su Internet sono disponibili le versioni aggiornate di driver e
documentazione di questo prodotto.
Collegarsi a: www.scanning.datalogic.com
F
Les versions mises à jour de drivers et documentation de ce produit sont
disponibles sur Internet.
Cliquez sur: www.scanning.datalogic.com
D
Im Internet finden Sie die aktuellsten Versionen der Treiber und
Dokumentation für dieses Produkt.
Adresse : www.scanning.datalogic.com
E
En Internet están disponibles las versiones actualizadas de los drivers y
documentación de este producto.
Dirección Internet: www.scanning.datalogic.com

Quick Reference Guide 3
Gryphon ™ D432/D412 Plus
Description
The Gryphon™D432/D412Plus reader is an omni-directional barcode
scanner having the following characteristics:
Using this Quick Reference Guide, you can start using your Gryphon™
D432/D412Plus reader. For details about general configuration com-
mands, refer to the Gryphon™D432/D412Plus Product Reference
Guide available on the website.
Plug and Play The Gryphon™ D432/D412Plus is very ergonomic and user-friendly for
intuitive operation and is equipped with plug-and-play enhanced Multi-
standard Architecture. It can be connected to a Host PC through a USB,
RS232 or Wedge emulation cable.
Omni-directional
Operating
Toread a symbol or capture an image, you simply aim the reader and pull
the trigger. Since Gryphon™ D432/D412Plus is a powerful omni-direc-
tional reader, the orientation of the symbol is not important.
Decoding Thanks topowerful algorithms,Gryphon™ D432/D412Plus reliably
decodes all major 1D (linear)barcodes, 2D stacked codes (such as PDF417),
2D matrix symbols (such as DataMatrix), postal codes (such as POSTNET,
PLANET). The data stream — acquired from decoding a symbol— is rap-
idly sent tothe host. The reader is immediately available to read another
symbol.
Formatting and
Concatenating
The string of a decoded code may be processed according toeither a sim-
ple or advanced data formatting and be concatenated to other codes (up
to 4 different codes).
Imaging Gryphon™ D432/D412Plus can also function as a camera by capturing
entire images or image portions of labels, signatures, and other items.
Autoscanning An autoscan command causes the reader to scan continuously and to
monitor the central zone of its reading area.
Flash Memory Flash technology allows you to upgrade the Gryphon™ D432/D412Plus
reader as new symbologies are supported or as improved decoding algo-
rithms become available.

Using the Gryphon™ D432/D412Plus
4 Gryphon™ D432/412Plus
Using the Gryphon™ D432/D412Plus
Gryphon™D432/D412Plus normally functions by capturing and decod-
ing codes. The Gryphon™D432/D412Plus reader uses an intelligent
aiming system. By pulling the trigger, the aiming system indicates a field
of view, which should be positioned over the code:
Aiming System
When you pull the trigger a red beam illuminates the code. If the aiming
system is centered and the entire symbology is within the aiming system,
you will get a good read. The field of view changes size as you move the
reader closer or farther away from the code.
Relative Size and Location of Aiming System Pattern
The field of view indicated by the aiming system will be smaller when the
Gryphon™ D432/D412Plus is closer to the code and larger when it is
farther from the code. Symbologies with smaller bars or elements (mil
size) should be read closer to the unit. Symbologies with larger bars or ele-
ments (mil size) should be read farther from the unit.
Successful reading is signaled by an audible tone plus a good-read green
LED.
Linear barcode 2D Matrix symbol

Using the Gryphon™ D432/D412Plus
Quick Reference Guide 5
The Gryphon™ D432/D412Plus hand-held reader aiming
system is designed for general reading and decoding of
1D and 2D symbols. Some variation in reading distance
will occur due to narrow bar width and other factors.
When reading codes positioned on reflective surfaces, it
may be necessary to tilt the reader with respect to the
barcode.

Indicators
6 Gryphon™ D432/412Plus
Indicators
LED Indicators
The Gryphon™ D432/D412Plus has one green LED indicator signaling
the following reader functions:
Beeper
The Gryphon™ D432/D412Plus basic software provides beeper signals
for good/wrong reading and for indicating errors. Its tone, volume and
duration can be directly configured by using the codes given in the
Gryphon™ D432/D412Plus Product Reference Guide available on the
website.
The application program can also manage the beeper (User Defined
Beeper) when the reader is controlled by a Host PC. It is possible to acti-
vate the beeper by sending a command from the Host to the reader via the
current communication interface.
Good Read Spot
It is possible to enable a green good-read spot, which will be projected in
the field of view when the reading is successful.
Setup
Make connections between Gryphon™ D432/D412Plus and the Host
PC using the correct interface cable.
Read the correct Interface Selection code.
Your reader is now ready to read codes using the default settings.
STATUS BEHAVIOR
Power ON The LED lights up for 2 seconds to signal the power supply is
present.
Power ON with USB (without
external power supply) The LED blinks until the Host accepts the device.
Normal Function The LED lights up after a good decoding and will switch off
only at the next trigger press.

Connections
Quick Reference Guide 7
Connections
RS232
Wedge
The Wedge is only for Gryphon D432 + models
USB
The Gryphon™ D432/D412Plus reader requires the USB interface cable.
IBM PORT 9B* / IBM PORT 5B* / IBM USB
*The IBM PORT 9B and IBM PORT 5B is only for Gryphon D412Plus models.
If required

Disconnecting the Cable
8 Gryphon™ D432/412Plus
Disconnecting the Cable
USB Interface Configuration
The USB interface is compatible with:
Start-Up
As with all USB devices, on connection the Host performs several checks
by communicating with the GryphonD432/D412Plus. During this
phase the green LED on the GryphonD432/D412Plus blinks and nor-
mal operations are suspended. Two basic conditions must be met before
GryphonD432/D412Plus is ready to read codes: the correct USB
driver must be loaded and sufficient power must be supplied to the reader.
For all systems, the correct USB driver for the default USB-KBD interface
is included in the Host Operating System and will either be loaded auto-
matically or will be suggested by the O.S. and should therefore be selected
from the dialog box (the first time only).
If the Host supplies sufficient power to the reader, the start-up phase ends
correctly, the green LED stops blinking and the reader emits the beep OK
signal.
If the Host does not supply sufficient power to the reader, a dialog box
will appear on the Host and the reader will be blocked (green LED con-
tinues blinking). In this case, disconnect the USB cable at the Host (green
LED stops blinking), connect and power-up an external supply to USB
cable, then reconnect the USB cable to the Host and close the dialog box.
The reader emits the beep OK signal. You can now read codes.
Windows 98 (and later) IBM POS for Windows
Mac OS 8.0 (and later) 4690 Operating System

USB Interface Configuration
Quick Reference Guide 9
Now you can read the USB interface configuration code according to
your application. Load drivers from the O.S. (if requested). When config-
uring the USB-COM interface, the relevant files and drivers must be
installed from the USB Device Installation software, which can be down-
loaded from the web site http://www.scanning.datalogic.com.
The reader is ready.
Figure 1. First Start-Up
Successive start-ups will automatically recognize the previously loaded
drivers. If external power is used, verify that external power is already sup-
plied.
Figure 2. Successive Start-Ups
Does a dialog
box appear
warning that Bus
power is not
su ff ic ie n t?
G reen LED off
Se lec t d esire d US B
in te rf a ce co de
(U S B-K BD i s d efau lt)
NO
YE S
Read test codes.
Reader is READY
Load drivers
(if re queste d)
Load drivers
(if re queste d)
Green L ED blinks
Green L ED off - BEEP OK
BEEP OK
Connect
Gryphon™ D432/D412 + to Host
Disconnect reader
at H o st
Connect external
power supply to
cable and power up
Reconnect reader
cable to Host and
close dialog box
NO
YE S
Read test codes.
Reader is READY
G reen LED blinks
Green L ED off - B EE P OK
BEEP OK
Connect Gryphon™ D432/D412 +
to H o s t
Disconnect reader at Host
Connect external power supply to
cable and
p
ower u
p
Reconnect reader cable to
Host and close dialog box
Does a dialog box
appear warning
that Bus power is
no t su f fi cie n t ?

Interface Selection
10 Gryphon™ D432/412Plus
Interface Selection
RESTORE DEFAULT
AMHKGPAOFNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJALECHGIK
AKCBPJCJGIIJCMCFGPLCMMMNLK
AEFBJLBGMHPKMOGNKKNDPDMGGK
AAPHBAJIDGHPOJKEFPNCEACBHK
AFKFBKNGLGMOMELLGOPCMJFKIK
DDDDLDLLLDDLLLLDDDLDDLDLDL
RS232 Wedge – IBM AT
AMHKHMFOHNGNENEIEPANHOGOCK
AGPEPJAMDKEOFMHMLJAKFEHFKK
AMGNPJCJGIIJCMCEGJMHNDOLLK
AIFBJLBGMHPLNKECPCGMBBIBOK
AAPHBAJJDAAGMGKDDAOHBGGLHK
AEKFBONJCDDIECLFJIJKMCHLIK
DLDDLDLDLLDLLLLDLLDDDLDLLL
AMHKHMFOHNGNENEIEPANHOGOCK
AGPEPJAMDKEOFMHMLJALFAEHKK
AEONPJCJGIIJCMCEHPLLHLPPJK
AIFBJLBGMHPLNPDFHGDGFIBDOK
AAPHBAJJCGCOPJDIMBCEANODDK
AFKFBPPJPJCAALOIKIECIPIKLK
DDLDLDLDDLDLLLLDDDDDDLDLDL
USB BULK USB KB EMULATION
AMHKHMFOHNGNENEIEPANHOGOCK
AGPEPJAMDKEOFMHMLJAKFDDHKK
AEGNPJCJGIIJCMCEHIJOCEMNPK
AIFBJLBGMHPKMICPIAFFEONCOK
AAPHBAJJCCDBHCPKNDBPGLDBBK
AHLFBOPHCJGEMAMPAAEOMGMJKK
DDDDLDLDLLDLLLLDDDLDDLDLLL
AMHKHMFOHNGNENEIEPANHOGOCK
AGPEPJAMDKEOFMHMLJAKEDBEKK
AMGNPJCJGIIJCMCFHMNJLBJPHK
AIFBJLBGMHPKNMBGMJOJEHHAOK
AAPHBAJICDHCJBCNKPCNNJNFHK
AFLFBMPJIKPAMFFBBHKCCKNIKK
DLLDLDLDLLDLLLLDDDDDDLDLLL
USB COM EMULATION USB GENERIC HID
AMHKHMFOHNGNENEIEPANHOGOCK
AGPEPJAMDKEOFMHMLJALEAGEKK
AMONPJCJGIIJCMCFHLPMOOKNBK
AIFBJLBGMHPLMLAMDPIKFBLBOK
AAPHBAJICHGNBKOPLNBGLPAHFK
AHKFBNPHFKLEAOHGLPKOGDJLLK
DLDDLDLDDLDLLLLDDDLDDLDLDL
AMHKHMFOHNGNENEIEPANHOGOCK
AGPEPJAMDKEOFMHMLJALEHCGKK
AEONPJCJGIIJCMCFGKKFBJILFK
AIFBJLBGMHPKNJGBENLDAOOCOK
AAPHBAJIDFFKKOLGFOOOMCFNDK
AELFBNNJFAOIIMAMCHHKGHCJJK
DDDDLDLDDLDLLLLDLLDDDLDLDL
IBM PORT 9B IBM PORT 5B
AMHKHMFPHMGNEJEIEPANHOGOCK
AGPFONFCPKEOFMHMLJALEABEKK
AHCPLNCJGIIJCMCEHNPGDOEBCK
AAFBJLBGMHPKMPHKHIHFLPANKK
AAPHBAJICBFFGJNMEFIBBCHBBK
AGKFBILMPCDMDEFEFKKMEDKLLK
DLDDLDLDLDLLLLLDDLDDDLDLDL
AMHKHMFPHMGNEJEIEPANHOGOCK
AGPFONEDPKEOFMHMLJAKEFFHKK
AHCPLNCJGIIJCMCEHMLILIKJGK
AAFBJLBGMHPLNIFNPNEPPFMNKK
AAPHBAJJCCAFHGAJDDKJMHFFFK
AELFBINACDBGBBGHDPBAIMCLLK
DDDDLDLDDDLLLLLDLLLDDLDLDL
IBM USB
AMHKHMFOHNGNENEIEPANHOGOCK
AGOEPJAMDKEOFMHMLJAKECFEKK
AMONPJCJGIIJCMCFGMMHLFIFJK
AIFBJLBGMHPKMLBHKCCKPLJDOK
AAPHBAJIDDFDDLPAENDNINCJHK
AHKFBNJDHPIEOENLMJAAEBAIJK
DDDDLDLDLLLLLLLDDLLDDLDLLL

Wedge Keyboard Nationality
Quick Reference Guide 11
Wedge Keyboard Nationality
This parameter default value is restored through the Interface Selection
code and not through the Restore Default code.
Select one of the following keyboard nationality codes.
Belgian English
AMHKHNFMFNGNENEIEPANHOGOCK
AGOEPBIMDKEOFMHMLJAKFHHHKK
AMONPJCJGIIJCMCEHIOEHOELLK
AIFBJLBGMHPLMLDIEKHJAIJDOK
AAPHBAJJDCDBPHGLDNPMOHIBFK
AFKFBKLFPHGAIBPAHBACKOIIIK
DDLDLDLDLLLLLLLDLLDDDLDLDL
AMHKHNFMFNGNENEIEPANHOGOCK
AGPEPBIMDKEOFMHMLJAKFGDHKK
AMGNPJCJGIIJCMCEGIPKHKFBFK
AIFBJLBGMHPLNMDJCBLKLEHAOK
AAPHBAJJCCBAFNLGNPOMLDHNFK
AHLFBLNPACBEKAHKKPKAMFFILK
DLDDLDLDLLDLLLLDLDLDDLDLDL
French German
AMHKHNFMFNGNENEIEPANHOGOCK
AGPEPBIMDKEOFMHMLJAKEGBEKK
AEGNPJCJGIIJCMCFGMLNOPADNK
AIFBJLBGMHPLMIAAGIAGLNNCOK
AAPHBAJICDFDLOGBKDNOABJJDK
AFLFBJNBKBIAKFOELIEMCJEJLK
DDLDLDLDLLDLLLLDLDDDDLDLDL
AMHKHNFMFNGNENEIEPANHOGOCK
AGPEPBIMDKEOFMHMLJALFFEHKK
AMONPJCJGIIJCMCEGPNPCFGDDK
AIFBJLBGMHPKMLCDNHNJKCLBOK
AAPHBAJJCGAPNGHEMNNHNFKPHK
AFKFBKNBNCFAGLFNAHKMIMBLKK
DLLDLDLDDLDLLLLDLDDDDLDLLL
Italian Japanese
AMHKHNFMFNGNENEIEPANHOGOCK
AGPEPBIMDKEOFMHMLJALEFGEKK
AEONPJCJGIIJCMCFGLJILADBLK
AIFBJLBGMHPKNPBKJOGFKLBDOK
AAPHBAJICHEMDFKDLBOFGHELBK
AHKFBINPHBMEGOMDBAEAGAAKKK
DDDDLDLDDLDLLLLDLDLDDLDLLL
AMHKHNFMFNGNENEIEPANHOGOCK
AGOEPBIMDKEOFMHMLJALFEAHKK
AMGNPJCJGIIJCMCEHPMBCBHJNK
AIFBJLBGMHPKNMCCLMBKBOFCOK
AAPHBAJJDGCOHMKJCPMHIBFDHK
AHLFBLLLCHCEEKNHNJAOOHMLJK
DDDDLDLDDLLLLLLDLLLDDLDLLL
Spanish Swedish
AMHKHNFMFNGNENEIEPANHOGOCK
AGPEPBIMDKEOFMHMLJAKFBHFKK
AEGNPJCJGIIJCMCEHJKDINHHBK
AIFBJLBGMHPKMOFEFDIDOLCDOK
AAPHBAJJDACHOJOPDMBEMOCHDK
AEKFBLPBAIEICCAADHHEMBOKJK
DDDDLDLDLLDLLLLDDLDDDLDLDL
AMHKHNFMFNGNENEIEPANHOGOCK
AGPEPBIMDKEOFMHMLJALFCAFKK
AEONPJCJGIIJCMCEHOIGNCEFHK
AIFBJLBGMHPLNJEOKFOAPNOCOK
AAPHBAJJDEDIGCCNCOCPKIPFBK
AGLFBKPPNIAMOJCHJPHIIIKJIK
DDLDLDLDDLDLLLLDDLLDDLDLLL
USA
AMHKHNFMFNGNENEIEPANHOGOCK
AGPEPBIMDKEOFMHMLJAKEBFGKK
AMGNPJCJGIIJCMCFHNOEBICFJK
AIFBJLBGMHPKNKGNBKDPOCIBOK
AAPHBAJIDBGEAKDIEACGHMMDFK
AGKFBJPPKLNMCHJOCAJICNPLJK
DLLDLDLDLLDLLLLDDLLDDLDLDL

USB Keyboard Nationality
12 Gryphon™ D432/412Plus
USB Keyboard Nationality
This parameter default value is restored through the Interface Selection
code and not through the Restore Default code.
Select one of the following keyboard nationality codes.
Belgian English
AMHKHNEIHNGNENEIEPANHOGOCK
AGOEPBIMDKEOFMHMLJAKEGBGKK
AMONPJCJGIIJCMCFHMKLPKLHPK
AIFBJLBGMHPLNMCPOFAOBCPDOK
AAPHBAJIDCAHEOLPFCIKHIOFFK
AHLFBIKHBNMAADMEBDDIAJCKLK
DDLDLDLDDDLLLLLDDDLDDLDLDL
AMHKHNEIHNGNENEIEPANHOGOCK
AGPEPBIMDKEOFMHMLJAKEHFGKK
AMGNPJCJGIIJCMCFGMLFPOKNBK
AIFBJLBGMHPLMLCOIOMNKOBAOK
AAPHBAJICCCGOEGCLAJKCMBJFK
AFKFBJMNOILECCEOMNJKGCPKIK
DLDDLDLDDDDLLLLDDLDDDLDLDL
French German
AMHKHNEIHNGNENEIEPANHOGOCK
AGPEPBIMDKEOFMHMLJAKFHHFKK
AEGNPJCJGIIJCMCEGIPCGLPPJK
AIFBJLBGMHPLNPBHMHHBKHLCOK
AAPHBAJJCDGFAHLFMMKIJOPNDK
AHKFBLMDELCACHNANKHGIOOLIK
DDLDLDLDDDDLLLLDDLLDDLDLDL
AMHKHNEIHNGNENEIEPANHOGOCK
AGPEPBIMDKEOFMHMLJALEECGKK
AMONPJCJGIIJCMCFGLJAKBJPHK
AIFBJLBGMHPKNMDEHIKOLINBOK
AAPHBAJICGDJGPKAKCKBEKMLHK
AHLFBIMDDIPAOJGJGFJGCLLJJK
DLLDLDLDLDDLLLLDDLLDDLDLLL
Italian Japanese
AMHKHNEIHNGNENEIEPANHOGOCK
AGPEPBIMDKEOFMHMLJALFEAFKK
AEONPJCJGIIJCMCEGPNHDEMNPK
AIFBJLBGMHPKMIANDBBCLBHDOK
AAPHBAJJCHHKIMHHNOJDPICPBK
AFLFBKMNJLGEOMPHHCHKMHKIJK
DDDDLDLDLDDLLLLDDLDDDLDLLL
AMHKHNEIHNGNENEIEPANHOGOCK
AGOEPBIMDKEOFMHMLJALEFGGKK
AMGNPJCJGIIJCMCFHLIOKFIFJK
AIFBJLBGMHPKMLDFBDGNAEDCOK
AAPHBAJIDGBIMFHNEALBBODHHK
AFKFBJKJMNIEMIODLLDEEAGJKK
DDDDLDLDLDLLLLLDDDDDDLDLLL
Spanish Swedish
AMHKHNEIHNGNENEIEPANHOGOCK
AGPEPBIMDKEOFMHMLJAKEABEKK
AEGNPJCJGIIJCMCFHNOMAJILFK
AIFBJLBGMHPKNJEDPMPEPBEDOK
AAPHBAJIDABBFADLFDGCFBEDDK
AGLFBJODOCOIKADEFFEOGGEIKK
DDDDLDLDDDDLLLLDLDLDDLDLDL
AMHKHNEIHNGNENEIEPANHOGOCK
AGPEPBIMDKEOFMHMLJALEDGEKK
AEONPJCJGIIJCMCFHKMJFGLJDK
AIFBJLBGMHPLMOFJAKJHOHICOK
AAPHBAJIDEAONLPJEBFJDHJBBK
AEKFBIONDCKMGLBDPNECCPALLK
DDLDLDLDLDDLLLLDLDDDDLDLLL
USA
AMHKHNEIHNGNENEIEPANHOGOCK
AGPEPBIMDKEOFMHMLJAKFADHKK
AMGNPJCJGIIJCMCEHJKLJMNJNK
AIFBJLBGMHPKMNHKLFEIPIOBOK
AAPHBAJJDBFCLDOMCPFAODKHFK
AELFBLONEBHMKFKKECKCIKFJKK
DLLDLDLDDDDLLLLDLDDDDLDLDL

Reading Parameters
Quick Reference Guide 13
Reading Parameters
Aiming System Delay
Point the reader at the target and pull the trigger to enable the aiming sys-
tem and the illuminator (red beam) to capture and decode the image. The
aiming system will briefly switch off during the acquisition time and if no
code is decoded will switch on again before the next acquisition. The illu-
minator will remain on until the symbol is decoded.
As you are reading code symbols, adjust the distance at which you are
holding the reader.
The Aiming System Delay parameter can be used to set a delay between
the activation of the aiming system and the activation of the illuminator.
This allows more time to center the reader over the target before image
acquisition.
Good Read Spot Duration
Successful reading can be signaled by a good read green spot.
Disabled Short
AMHKHNGMFNGNENEIEPANHOGOCK
AHPEHJAMDKEOFMHMLJALFEGEJK
AEONPJCJGIIJCMCFHLKIGMCNPK
AIFBJLBGMHPLMKAKFELALIDBOK
AAPHBAJJCDEANNKCMONKAHNPDK
AELFBKMLJCPOMGAOLLMMOMPKKK
DDLDLDLDDLLLLLLDDDDDDLDLDL
AMHKHNGMFNGNENEIEPANHOGOCK
AHPEHJAMDKEOFMHMLJAKEHDHJK
AMGNPJCJGIIJCMCEHIMKKGENBK
AIFBJLBGMHPKMJCJOLGPKHFCOK
AAPHBAJICGBMLFLHKANDNDOJHK
AEKFBJMLOBCOAILHAECMEJKILK
DLLDLDLDLLLLLLLDDDDDDLDLLL
Medium Long
AMHKHNGMFNGNENEIEPANHOGOCK
AHOEHJAMDKEOFMHMLJAKEGHHJK
AMONPJCJGIIJCMCEGINEKCFHPK
AIFBJLBGMHPKNOCIIAKMBLLBOK
AAPHBAJIDGDNBPGKECMDIHBFHK
AGLFBIKBBEFKCJDNNKIOCCHIIK
DDDDLDLDLLDLLLLDDLLDDLDLLL
AMHKHNGMFNGNENEIEPANHOGOCK
AHOEHJAMDKEOFMHMLJAKFBBGJK
AMONPJCJGIIJCMCFHNMKMACDDK
AIFBJLBGMHPLNIHMLLCJENEAOK
AAPHBAJJCFEJEIOENNAJEIKLHK
AHKFBKIBLNJCKONJFFLGMKNLKK
DDLDLDLDLLDLLLLDLDLDDLDLLL
Disabled Short
AMHKHNGMFNGNENEIEPANHOGOCK
AGPEPBIMDKEOFMHMLJAKEEGEKK
AMGNPJCJGIIJCMCEHMNEPKCDPK
AIFBJLBGMHPLNKHNAEHPNLGDOK
AAPHBAJIDFDNGNPJFBDBHFOHHK
AHLFBOIEEHIOMFIGJFGGIFJKKK
DDDDLDLDDDLLLLLDDLDDDLDLLL
AMHKHNGMFNGNENEIEPANHOGOCK
AGPEPBIMDKEOFMHMLJALEAFGKK
AEONPJCJGIIJCMCEGKKIFCDHNK
AIFBJLBGMHPLNPAKIACFJCPBOK
AAPHBAJICDBFFCGCKAPCGOGPDK
AGLFBPKEJNJGIMNLKFLOMIGLJK
DLLDLDLDLDLLLLLDLDDDDLDLDL
Medium Long
AMHKHNGMFNGNENEIEPANHOGOCK
AGPEPBIMDKEOFMHMLJAKEDCGKK
AEGNPJCJGIIJCMCEGNINANAFLK
AIFBJLBGMHPKMIBAHGEGIEDAOK
AAPHBAJICHAKNJKALCMJAILNBK
AEKFBOKKENNCEHPMANLCIBCIIK
DLDDLDLDDDLLLLLDLDLDDLDLLL
AMHKHNGMFNGNENEIEPANHOGOCK
AGPEPBIMDKEOFMHMLJALFAHFKK
AMONPJCJGIIJCMCFGOOPMHGFFK
AIFBJLBGMHPLMLDDMJJJJLFDOK
AAPHBAJJCCFGLBLFNMMANMILFK
AELFBNKKDOACIJEFLCFCCEHKJK
DDDDLDLDLDLLLLLDLDLDDLDLDL

Default Configuration
14 Gryphon™ D432/412Plus
Default Configuration
RS232 Standard DEFAULT SETTINGS
115200 baud, no parity, 8 data bits, 1 stop bit, no handshake, no protocol,
FIFO enabled, intercharacter delay = 0, intercode delay = 0, serialtrigger lock disabled, serial trig-
ger lock disable character = NUL, serial trigger lock enable character = NUL, RX Timeout = 10 sec
USB COM Emulation DEFAULT SETTINGS
no handshake, no protocol, FIFO enabled, intercharacter delay = 0,
intercode delay= 0
USB Keyboard Emulation DEFAULT SETTINGS
USA keyboard*, intercharacter delay = 0, intercode delay = 0, FIFO enabled,
keyboard speed = normal
WEDGE Communication DEFAULT SETTINGS
USA keyboard*, CapsLock OFF, CapsLock Auto-Recognition ON, NumLock OFF, intercharacter delay =
0, intercode delay = 0
IBM 46xx Interface DEFAULT SETTINGS
protocol= Port 5B 1520, format = IBM Standard Format
IBM USB Interface DEFAULT SETTINGS
device usage = handheld, format = IBM Standard Format
DATA FORMAT – Symbology Independent Parameters
Custom code identifier disabled, code identifier disabled, code length disabled
Default headers and terminators*:
- RS232: no header, terminator = CR-LF
- USB BULK: no header, terminator = CR-LF
- USB COM: no header, terminator = CR-LF
- USB Generic HID: no header, terminator = CR-LF
- Wedge: no header, terminator = ENTER
- USB Keyboard: no header, terminator = ENTER
- IBM 46xx: no header, no terminator
- IBM USB: no header, no terminator
DATA FORMAT – Symbology Dependent Parameters
symbology specific format = select all, no headers, no terminators, symbology character substitu-
tion disabled, symbology character deletion disabled
*The default values of these parameters are set when reading the interface
selection.

Default Configuration
Quick Reference Guide 15
DATA FORMAT – Concatenation
Concatenation disabled, 2 EAN/UPC codes concatenated, Set First Concatenated Code Length 000 =
any length, Set Second Concatenated Code Length 000 = any length, Set Third Concatenated Code
Length 000 = any length, Set Fourth Concatenated Code Length 000 = any length, Concatenation
with Intercode Delay disabled, Concatenation Timeout 10 seconds, Concatenation Failure Transmis-
sion = Tx codes causing failure, Transmissionafter Timeout = No code transmission, Concatenation
Result Code ID = No code Identifier
ADVANCED FORMATTING PARAMETERS
format disabled
POWER SAVE
Illumination power = ON
CODE SELECTION
issue identical codes = enable
enabled codes
Standard Code 39: no check digit control, variable code length;
EAN 8/EAN 13 / UPC A/UPC Ewithout ADD ON: UPCE expansion disabled
Interleaved 2/5: check digit control and transmission, variable code length
Code 128: variable code length
PDF417
Datamatrix: rectangular, normal and inverted, variable code length
QR
disabled codes
Code 32, Codabar, Code 93, EAN 128, RSS, Micro PDF417, Postal Codes, Maxicode, Composite Codes,
Aztec.
READING PARAMETERS
trigger type normal, trigger level mode, flash on = 2 sec, flash off = 2 sec, beeper tone = tone 1,
beeper volume = high, beeper duration = 50 ms, user defined beeper = tone 1, user defined
beeper volume = high, user defined beeper duration = 100 ms, code per scan = one code per scan,
read per cycle = one read per cycle, scan timeout = 5 sec, central code transmission enabled, order
by code length disabled, order by code symbology disabled, autoscan mode disabled, autoscan aim-
ing system enabled, autoscan hardware trigger enabled, autoscan illumination system disabled,
stand autoscan mode = normal, aiming system delay = disabled, good read spot = short, safety
time = 500 ms
IMAGE FORMATTING
Image Preset 1, 2, 3, 4
image format = JPEG, set JPEG quality factor = 50, brightness = 0%, contrast = 0%, zoom =
100%, color depth = 256 gray level.

Operating Test
16 Gryphon™ D432/412Plus
Operating Test
EAN-13 Code 39 (Standard)
Code 128 PDF417
QR Data Matrix (Normal)
1 234567 000992
17162
test

Technical Features
Quick Reference Guide 17
Technical Features
Gryphon™ D432/D412Plus Common Features
Electrical Features
Operating Voltage (D432 + )
(D412Plus )
4.75 to 5.25 V
4.75 to 24V
Power Consumption
@ 5V (D432 +, Typical) 245 mA
@4.75V (D432 +, Peak current) 330 mA
@ 5V (D412Plus, Typical) 340 mA
@ 4.75V (D412Plus, Peak current) 465 mA
@ 14V (D412Plus, Typical) 90 mA
@ 14V (D412Plus, Peak current) 135 mA
Communications Features
Standard Interfaces RS-232, Keyboard emulation AT IBM, USB COM emulation, USB
Keyboard emulation
Proprietary Interfaces USB Bulk, USB Generic HID
Environmental Features
Operating Temperature 0° to +55 °C (+32° to +131 °F)
Storage Temperature -20° to +70 °C (-4° to +158 °F)
Humidity 0 to 95% NC
Drop Resistance IEC 68-2-32 Test ED – 1,8 m. on concrete
Mechanical Features
Dimensions 179 x 81 x 98 mm (7.04 x 3.18 x 3.85 inches)
Weight 198 g (6.9 oz.) without cable
Decoding Capability
1D Interleaved 2 of 5, Code 39, Code 32, Code 128, EAN 128,
Code93, UPC/EAN/JAN, Codabar, RSS
2D Aztec, PDF417, Micro PDF417, Macro PDF417, Maxicode,
DataMatrix (ECC200), QR, Composite Codes
Postal Codes POSTNET, PLANET, Japan Post, Australia Post, KIX Code, Royal
Mail Code (RM4SCC)
Imaging Option
Image 752 x 480 pixel format
Graphic Format JPEG, 256 gray levels
TIFF, 2, 16, 256 gray levels
Optical Features
Sensor 752 x 480 pixel element, 2D CMOS Array
Illuminator LED array
Wavelength In the range 630 ~ 670 nm
LED Safety Class Class 1 to EN 60825-1
Aiming System Visible Laser Diode

Technical Features
18 Gryphon™ D432/412Plus
* Reading distances are measured from the nose of the reader.
NOTE: Typical performance at 20ºC / 68ºF on high quality barcodes.
Wavelength 650 nm
Laser Safety Class Class 2 - EN 60825-1; Class II CDRH
Ambient light 0 - 100000 lux
Optical Features (continued)
Focus distance 110 mm
Field of view 39°(H)x25°(V)
Horizontal field of view at distance
(d) in mm 0.7d+ 24
Vertical field of view at distance (d)
in mm 0.46d+ 15
Max Resolution Linear codes - mm
(mils)
PDF417 - mm
(mils)
Datamatrix – mm
(mils)
0.10 (4) 0.10 (4) 0.17 (6.6)
Depth of field*
1D (linear): X-dimension
mm (mils)
DOF
mm (in)
Code39 0.13 (5) 45 to 75 mm
(1.77 to 2.95)
0.5 (20) 50 to 320
(1.97 to 12.60)
EAN13 0.33 (13) 15 to 220
(0.59 to 8.66)
2D: X-dimension
mm (mils)
DOF
mm (in)
PDF417 0.13 (5) 30 to 70 mm
(1.18 to 2.76)
0.25 (10) 5 to 220
(0.20 to 8.66)
DataMatrix 0.19 (7.5) 45 to 95
(1.77 to 3.74)
0.25 (10) 15 to 140
(0.59 to 5.51)
Skew ±40°
Pitch ±35°
Rotation 360°
Print Contrast (Min.) 23%