Datalogic Touch 90 pro User manual

Datalogic Scanning, Inc.
959 Terry Street
Eugene, Oregon 97402
Telephone: [phone]
Fax: [phone]
An Unpublished Work - All rights reserved. No part of the contents oi ths oo.Lr3iiâi.r .f ine
procedures described therein may be reproduced or transmtted in any fofm of by ar! rea.s ,v:iaut
prior wrtten permission of Datalogic Scanning, Inc. or its subsidiares of af êl:i DalroJ. or
"Dataoglc Scanning"). Owners of Datalogc products are hereby granted a non-êxcilsile Tevocabe
censetoreproduceandtransmitthisdocumentationforthepurchasefsolvn ntefna b!sn:sso!rposes.
Purchasershallnotremoveoralteranyproprietarynotices lncudingcopyfghtiotces..o":a:feC nths
documentation and sha I ensure that a L notices appear on any feproduct ons ci the oc:J-eaia: or
Shou d future revislons of this manual be pub lshed, you can acqu re piinied vers crs c_, :jnia:i .g you.
Datalogc representatve. Eectronc veTsions may either be downloadabe irom t:e Dai:cc. $€bste
(\M.scanning.datalog c com) or provided on appropriate med a lf you vis I ouf webs i: ê.d \!cL d like
to make comments or suggestions about this or other Data ogic pub cations. plea3e Èi Js ^-:J, . . :he
'Contact Data ogic" page.
DISCLAIMER
Dataoglc has taken reasonabe measures to provde informaton in this manua that s ac-ce:e â-a
accurate, however. Datalogic reserves the right to change any specflcation at afy ime r.i^..: c...
notice. Datalogic is a feg stered trademark oi Datalogic S p.A. in many countr es aaa :he D::a a-c a c_.c
is a tfademark of Datalog c S.p.A. a censed to Datalogic Scann ng. Inc A other raae- e.r. e^....aie
names aefetred to here n âre property of their respect ve owners
SERVICES AND SUPPORT
Dataogc pfovdes sEvefa sea/icas as !!e as technica suppod thiough ts website La9 :i
www.scanning.datâlogic.com ana a ck cn the n(s nd cated for fudher informat on inc udifc
. PRODUCTS
Seê.:a :hra"!r ii: n(s :a er'.: ::
ù1anuàls r- i Software & LJtrlities -- :
- Daialog;c Aladoira j - - ..a r:
a PC. 1 cfcvdes RS2:2 LSE,afr,l
pfrnt ng
. SÊRVICES & SUPPORT
- Dataloqic Seruices - Wè1a"tr' E,re-. 01< a-J l.'a -le-d ... - :'.-.. - : - :
- Authorised Repair Centres
O CONTACT US
E-mail fofm and listing of Datalog c Subsid aries
WARRANTY
Datalogic warrant es th s product aga nst defects !n workmanshlp and materia s, for a period of 5 years
from the date oi sh pment. provided that the prod!ct is operated undeT noTma and proper conditions.
Dataogic has the facuty io repair or replèce the pfoduci il.esÊ p.ol lrois do not prolong lhe ofiginal
warranty term.
The warranty does not apply to any product that has been slbject to msuse accdentar damege
unauthorized repair or tampering.
/c,-:rld!ai oeae \lhere you can do!!aa:: sa:a'
_l
$DATALOGIC.-
TouchrM 65/90 Light
CONTACT READERS
QUICK REFERENCE GUIDE
820001801 (Rev. A)
UPDATES AND LANGUAGE AVAILABILITY
UI(/US
The latest drivers and documentation updates for this product are available on
I nternet.
Log on to: wwvr'.scanning.datalogic.com
I
Su nternet sono dispon bili le versioni aggiornate di driver e documentazione di
questo prodotto. Questo manuale è disponibile anche nella versione italiana.
Collegarsi a: www.scanning.datalogic.com
F
Les versions mises à jour oe orivers et oocLmentation de ce produit sont
disponibles sur Internet. Ce manuel est aussi disponible en version française.
Cliquez sur : wvwv.scanning.datalogic.com
D
m Internet flnden Sie die aktuellsten Versionen der Treiber und Dokumentation fùr
dieses Produkt. Die deutschsprachige Version dieses Handbuches ist auch
verfùgbar.
Adresse : www.scanning.datalogic.com
E
En Internet estân disponibles las versiones actualizadas de los drivers y
documentaciôn de este producto. También estâ disponible la versiôn en espaôol
de este manual.
Direcciôn Internet : www.scanning.datalogic.com
Data ogrc Scann ng Nc
959 Terry Stfeet
Elgene, OR 97402
r:::rês thal the
aêsa^e I ci. dâR das Geràt
To"ch 90
e rJ:it s!c mcoê
an: e ts nocers
eI icus ses mooe es
ùnd seine fu1odel e
y Iooos sus mooeos
::-:.:-ior- ê e Orehvede Cons glio Europeosotroelencate:
:_: _ :a__an tr \(h the requfemenls ofthe E!ropean Counci D rectives hsted below
::_: :a__:-res aux spécif câtons des D rectives de Union Européenne ci dessous
ra_ -::_s::renôen angefùhden D rektiven des Europà schen Rals:
:--a:::. cs'equstosde asDrectivasdelConsejoEuropeo segrln alistaslgulente
83 33ôÊEC EMC Directive
( (,,
e 9231/EEG,93/68/EEC
and
et
!nd
emenoamenl successrv
fudher amendments
ses successTs amenoemenis
spàteren Abànderungen
sucæstvas enm enoas
a:3::. s! ê eg s az on deg i Stati membr in relazione alla compatibi ità eleitromagnetica ed a a srcureza .ê
: _ i_. êcp.oximal on of the laws of l,4ember States re ating to elecfomagnetic compatibi iiy anC product se'et!
3:aêe sù. â égislat on des Etats membres re ative à a compat b lité électromagnétique el à a sécuf té des
:_:0- is
-.er . e Annâherung def Geselze der lMitg iedsstâaten in bezlg auf elektromagnet sche Vedràg ichkeit !nC
:_a lJkls cherhe t entsprechen.
:esâdo en a apfoximac ôn de las leyes de los Paises l\liembros respecto a la compat b I clad e ecfomaEf,éi ca r
;s i,ledidas de segurdad re ativas al producto.
:-:sia dich arazione è basata s! la conform tà dei Drodotti al e norme seo!enti:
_ l L é-aron s odsêo Loo- coTolianc. o'rhe o ooL.t: ro the.o o*r g ra-ndaro.:
:::ê déclafat on repose sur lâ conformilé des produ ts aux normes su vantes
I :s9 Êrklàrung bas ed darauf, dâB das Produkt dei folqenden Normen entsor cht:
. j r. à oco- qe basa e' et c,io riento oe o. proorc-os.o- l" srgur"nto. ô..uy
EN 55022 (CLAss B ITE), AucusT 1994: LtM rs AND METHoDS oF MEASUREMENTs cÉ Ri: O
AilENoMENT A1 (CLAss B ITE), OCToBER 2000: D STURBANCE oF NFoRMÀT oN iÊcHNoLoGy Eou ?r,r:\
EN 55024, SEPTEMBER 1998 |NFORMAT ON TECHNOLOGY EQUIPMENT I!M!N 1
CHARACÎER ST CS. L MITS AND METHOOS OF MEASURE[1:N-S
\lêfch lst.2007

DEFAULT VALUES RESTORE DEFAULT
RESTORE DEFAULT S
ilt llllililillil]till
To change the defaults refer to the HHD ll Software Configuration Manual, part
number 90ACC1877. or to the DL Sm@rtsetrM Configuration program, both
downloadable from the website.
USB-KBD DEFAULT SETTINGS
USA keyboard, FIFO enabled, inter-character and inter-code delays disabled,
control character emulation = ctrl+shiit+key.
DATA FoRr\4AT: code identifier disabled, no field adjustment. code length not
transmitted, no header, terminator = ENTER. character replacement disabled.
RS232 Standard DEFAULT SETTINGS
9600 baud, no parity, I data bits, 1 stop bit, no handshaking. delay disabled, rx
timeout 5 sec., acUnack disabled, FIFO enabled, serial tngger lock disabled.
DATA FORMAT: code identifier disabled, no field adjustment. code length not
transmitted. no header. terminator = CR-LF. character ieplacen'rent disabled.
WEDGE DEFAULT SETTINGS
USA keyboard, caps lock off, caps lock auto-recognition enabled. nurn lock
unchanged, inter-character and inter-code delays disabled, control character
emulation = ctrl+shift+key.
DArA FORMAT: code identifier disabled, no field adjustment, code length not
transmitted, no header, terminator = ENIER, character replacement disable.
PEN DEFAULT SETTINGS
interpret mode. conversion to code 39 disabled. output level normal, idle level
normal, minimum output pulse 600 us. overlow medium, inter-block delay disabled.
CODE SELECTION
Enabled codes
. EAN 8/EAN 13 / UPC AJUPC Ë without ADD ON
check digit trarsnined. no convers ons
o Interleaved 2/5
check digit control and transmission, variable length code: 4-99 charactere
. Standard Code 39
no cl'eck d'git control. variable length code: 1-99 characters
o Code 128
variabie length code; '1 -99 characters
Disabled codes
EAN 128, |SBT128, Code 93. Codabar. pharmaceutical codes, MSl,
Plessey, Telepen, Delta lBM. Code 11, Code 16K, Code 49. RSS Codes
INTERFACE SELECTION
Select one of the interface codes according to your application.
USB INTERFACE SELECTION
USB-KBD
lil il lt ililill | il|ilt 1iltilil ]l
USB-KBD -ALT-mode â
ill il ll ilil]t I lillllil ililt ilt ]l
USB-COM "
iltililil||]t|1ilililillil|||]l
USB-lBM-Hand Held
lll ll ll illllll I llllllll lllilill lll
' When conflguring USB-COtvl. the relevant flles and drivers must be installed
from the USB Device Installation software. which cân be downloaded from the
web site http:iwww.scanning.datalogic.com.
RS232 INTERFACE SELECTION
RS232 Standard
ill ltlliltIilililil|il1ltilt Nixdorf Mode A
ilt il il ill I lil illl ll I I llllll lllllll I lll
Fujitsu
iltilililt|ilililil|illilI]l ICL Mode
ilt ltil Ilt|ilil ililillllllIlll
WEDGE INTERFACE SELECTION
Wedqe IBM AT or PS/2 PCs
ilr il llilr|ilililililffilililil | ilr
PC Notebook
ilt il il ilt | ililtilillllll llllllll lll
PC Notebook - ALT mod$
lil il il lil I 1ilililil]ilt ilil1il| lll
IBM AT - ALT mode
ilt il il til l ililililil|il1 lllll lll lll
l\,4any other interfaces are supported and can be selected from the HHD ll
Software Configuration Manual available online at wrywv.scanning.datalogic.com.
Other supported interfaces:
USB: USB-lBM-Table Too: USB-KBD-APPLE
WEDGE: IBM XT; IBM SURE1; IBM Terminal 3153; IBM Terminals 31xx,32xx,
34xx, 37xx; Wyse Terminals ANSI - PC *ASCIl - VT220 style Keyboards; Digital
Terminal VT2xx/VT3xx/VT4xx; APPLE ADB Bus
TECHNICAL FEATURES
Electrical Features
Power Supply
RS232 interface 5Vdct5%
Consumplion:
Maximum
Operating
Sleep mode &
USB Suspend Mode
150 mA @ 5 Vdc
100 mA @ 5 Vdc
<500FA@5Vdc
[,4ax. Scan Rate 256 scans/sec
Reading Indicators LED, Beeper
Optical Features TouchrM 65 Liqht I TouchrM 90 Liqht
Sensor CCD solid state (2088 pixels)
Reading Field 63 mm typical | 80 mm typical
l\,4ax. Resolution 0.'10 mm | 0.13 mm
(4 mils) | f5 mils)
PCS min.25Va (Datalogic Test Chart)
Environmental Features
Working Temperature 0'to +55'C / 32'to 131 "F
Storage Temperature -20' to +70 "C i -4' to 1 58 "F
Humidity 90% non condensing
Drop Resistance 1.2m(3ft9in)
ESD Protection 16 KV
Protection Class tP30
Mechanical Features
Weight (without cable) about 160 g (5.6 oz) | about 195 g (6.8 oz)
Cable Length 2m(6ft6in)

KEYBOARD NATIONALITY
USB-KBD and Wedge users should select one of the following wedge keyboard
nationality codes according to your keyboard.
Belge
lililillil|illtililtilil]il]l
Deutsch
tililililtIililililtililililill
English
lll llil iltIilil liltilililtIill
Espanol
ilt ilil ill|ilil 1ilil1ililil ]l
Français
iltilltilr|ililnilil1ililt]l
Italiano
ilt ltil iltIffi illtilil|ltIill
Japanese
ilt ilililtI|Iilililtililil|lilt
Svenskt
ilr ilil ill|ilil 1ililil1ililt|Il
USA (Default)
ilt ilil iltIilil ilililil|||]l
USING TOUCHTM LIGHT SERIES READERS
TouchrM Light readers scan barcodes on contact. All models have a hardware
trigger button which by default must be pressed to read a code. After configuring
the reader interface type, the software trigger parameter (available in this manual)
can be selected so that the reader operates like a model without trigger.
Code scanning is performed along an lmaginary line passing across the reading
window. This imaginary line must pass through the entire code.
Successful scanning is obtained by keeping the handle of the reader parallel with
resoect to the code surface. see the fioure above.
DATA FORMAT TERMINATORS
For your convenience, some common Terminators are given below. For other
Header/Terminator selections, Data Format and Advanced Data Format
parameters, see the HHD ll Software Confiquration Manual.
UK-Ltr
ilt ilil iltilil|ilililil|||fiil|il|il1] Iill
i Enter Ë
llr lr il ilt il il I ililililil1 ilIililt ]l
Tab F
ilt il ililtilil| ililil|iltilil]il ill
None
ilt illliltilil|ililil1ilil il ]l
TRIGGER SELECTION
After configuring the reader interface type, the software tngger pa[ameter can be
selected so that the reader operaies like a model without trigger.
Software Trigger
ilt illrilril||]ililililil1tl
r Hardware Trigger
ilt ilil ilt||il1ilililfiilr]l
OPERATING TEST
Read the TEST code below
Code 128
iltililil||il]ilfl]l
test

CONNECTIONS DISCONNECTING THE CABLE
USB
WEDGE
RS232 <Æ
tl
c
\J
NOTE
Prior to connection, verify that your connection cable
matches your TouchrM Light interface model (see product
label). Avoid connecting intefface cables, which are not
compatible with your TouchlM Light model.
COMPLIANCE
LED CLASS
Class 1 LED product.
This product conforms to 8N60825-1:2001.
FCC COMPLIANCE
l\,4odifications or changes to this equipment without the expressed written approval
of Datalogic could void the authority to use the equipment.
This device complies with PART 15 of the FCC Rules. Operation is subject to the
following two conditions: (1)This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference which
may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. lf this
equipment does cause harmful interference to radio or television reception, which
can be determined byturning the equipment offand on, the user is encouraged to
try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- lncrease the separation between the equrpment and receiver.
- Connect the equioment into an outlet on a circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced radioiTv technician for help.
POWER SUPPLY
This device is intended to be connected to a UL ListediCSA Certified computer
which supplies power directly to the reader or else be supplied by a UL Listed/CSA
Certified Power Unit marked "Class 2" or LPS power source rated 5 V, minimum
150 mA, which supplies power directly to the reader via the power connector of the
caDte.
WEEE
PATENTS
This product is licensed under the following U.S. patent:
6,158,661
This product is covered by one or more of the following patents:
U.S. patents 5,917,176t 5,992,744, 6,010,073; 6,305,606 B1; 6,517,003 82; and
6,712,271 82
European patents 789,315 81;822,508 B1; 829,814 B1; 851,378 B1; 895,175 B1;
and '1,205,871 Bl
Additional patents pending.
COMPLIANCE
\rf
//ç+\
-