Datalogic Star Application guide

1
RF DEVICE SETUP FOR STAR

Modem™
SETUP FOR STAND ALONE MODE
The following procedure allows configuring an RF Device to communicate with
STARModem™ in Stand Alone Mode:
Restore RF Device Default
1.
iPk
iPk
iPk
Enter Configuration
2.
ik
ik
ik
ONLY FOR DRAGON™ M
Set Date
3.
i*"k
i*"k
i*"k
+
six digits for Day, Month and Year (DDMMYY).
Set Time
4.
i*#k
i*#k
i*#k
+
four digits for Hours and Minutes (HHMM).

SETUP FOR STAND ALONE MODE
2
Set RF Device Address
5.
i3"3')k
i3"3')k
i3"3')k
+
four digits from the Numeric Table in the range 0000-1999.
All RF Devices must have different addresses.
STAR

Modem™ Address
6.
i343k
i343k
i343k
read the code above and the four-digit address of the
STARModem™.
Exit and Save Configuration
7.
i k
i k
i k

SETUP FOR STAR-System™ MODE
3
SETUP FOR STAR-SYSTEM™ MODE
The following procedure allows configuring an RF Device to communicate with
STARModem™ in STAR-System™ Mode:
Restore RF Device Default
1.
iPk
iPk
iPk
Enter Configuration
2.
ik
ik
ik
ONLY FOR DRAGON™ M
Set Date
3.
i*"k
i*"k
i*"k
+
six digits for Day, Month and Year (DDMMYY).
Set Time
4.
i*#k
i*#k
i*#k
+
four digits for Hours and Minutes (HHMM).
Set RF Device Address
5.
i3"3',k
i3"3',k
i3"3',k
+
four digits from the Numeric Table in the range 0000-1999.
All RF Devices must have different addresses.

SETUP FOR STAR-System™ MODE
4
STAR-Modem™ Address
6.
i343k
i343k
i343k
read the code above and the four-digit address of the STAR-Modem™
Exit and Save Configuration
7.
i k
i k
i k

5
NUMERIC TABLE
ik
ik
ik
0
ik
ik
ik
1
ik
ik
ik
2
ik
ik
ik
3
ik
ik
ik
4
ik
ik
ik
5
ik
ik
ik
6
ik
ik
ik
7
ik
ik
ik
8
ik
ik
ik
9