Datapath VisionSC-UHD2 User manual

Copyright Statement
© Datapath Ltd., England, 2018
Datapath Limited claims copyright on this
documentation. No part of this documentation may be
reproduced, released, disclosed, stored in any electronic
format, or used in whole or in part for any purpose other
than stated herein without the express permission of
Datapath Limited.
Whilst every eort is made to ensure that the
information contained in this documentation is correct,
Datapath Limited make no representations or warranties
with respect to the contents thereof, and do not accept
liability for any errors or omissions.
Datapath reserves the right to change specication
without prior notice and cannot assume responsibility for
the use made of the information supplied.
Datapath Limited acknowledges all registered
trademarks used within this documentation.
Audio and Video Capture Card
VisionSC-UHD2
UK Headquarters
Datapath Ltd.,
Bemrose House, Bemrose Park,
Wayzgoose Drive,
Derby,
DE21 6XQ,
United Kingdom
Tel: [phone]
Fax: [phone]
US Oce
Datapath North America
2490 General Armistead Avenue
Suite 102
Norristown, PA 19403
USA
Tel: [phone]
Email: [email protected]
Web: www.datapath.co.uk
Product VisionSC-UHD2 Quick Start Guide
Classication Released

Your packing box should contain the following items:
The VisionSC-UHD2 - Dual HDMI 2.0 capture card.
(For latest Vision Drivers and software go to
www.datapath.co.uk).
NOTE:
All plug-in cards are static sensitive and are packed in
antistatic materials. Please keep the card in its
packaging until you are ready to install.
This device complies with part 15 of the FCC Rules.
PACKING LIST HARDWARE INSTALLATION SOFTWARE INSTALLATION
We suggest that you regularly visit the Datapath web site
for information on updated drivers.
www.datapath.co.uk
It is strongly recommended that you read the detailed
help instructions on completion of the installation. Each
help topic may be printed for ease of use.
You are likely to need a at blade and/or a cross head
screwdriver for the installation of the VisionSC-UHD2 card;
it would be useful to have these to hand before you begin.
1. Power down the host system and also the input sources
which will be captured on the VisionSC-UHD2 card
2. Remove the host system cover.
3. Locate a vacant PCie slot (x8 or x16) on the
motherboard and remove the corresponding backing
plate.
4. Position the VisionSC-UHD2 into the selected PCIe
slot and secure the card by screwing the bracket to the
chassis.
5. Connect a HDMI 2.0 rated cables to the input
connectors on the VisionSC-UHD2.*
6. Connect the HDMI cables to input sources.
7. Power up the host system and then the input sources.
* Note: It is recommended that only authentic cables,
approved and certied by HDMI are used with the
VisionSC-UHD2 card. When capturing 4k 60p, Premium
Certied cables should be used.
Certied cables have a hologram/QR coded label
attached.
Download the required driver install.exe from the
Support pages on the Datapath website and follow the
Installation Wizard instructions as prompted.
FLY-VSC-EN2-V1.0