Datapath VisionRGB-E2S User manual

Copyright Statement
© Datapath Ltd., England, 2019
Datapath Limited claims copyright on this
documentation. No part of this documentation may be
reproduced, released, disclosed, stored in any electronic
format, or used in whole or in part for any purpose other
than stated herein without the express permission of
Datapath Limited.
Whilst every eort is made to ensure that the
information contained in this documentation is correct,
Datapath Limited make no representations or warranties
with respect to the contents thereof, and do not accept
liability for any errors or omissions.
Datapath reserves the right to change specication
without prior notice and cannot assume responsibility for
the use made of the information supplied.
Datapath Limited acknowledges all registered
trademarks used within this documentation.
Dual Channel Capture Card
VisionRGB-E2S
UK Headquarters
Datapath Ltd.,
Bemrose House, Bemrose Park,
Wayzgoose Drive,
Derby,
DE21 6XQ,
United Kingdom
Tel: [phone]
Fax: [phone]
US Oce
Datapath North America
2550 Blvd of the Generals
Suite 30
Norristown, PA 19403
USA
Tel: [phone]
Email: [email protected]
Web: www.datapath.co.uk
Product VisionRGB-E2S Quick Start Guide
Classication Released
Version Number V2.0.0

Your packing box should contain the following items
The VisionRGB-E2S dual channel capture card.
2 x DVI-VGA, 1 x DVI/Component and 1 x DVI/HDMI
Adapters.
(For latest drivers go to www.datapath.co.uk).
NOTE:
All plug-in cards are static sensitive and are packed in
antistatic materials. Please keep the card in its
packaging until you are ready to install.
You are likely to need a at blade and a Phillips head
screwdriver for the installation of the VisionRGB-E2S card;
it would be useful to have these to hand before you begin.
Power down the PC (including peripherals), switch o at
the mains and disconnect all the cables connected to the
computer, noting the positions for accurate reconnection
Remove the PC cover.
Locate a vacant PCIe slot (x4 or higher) on the motherboard
and remove the backing plate (retain all screws).
If in doubt consult your motherboard documentation to
correctly identify a PCIe (PCI Express) slot.
Remove theVisionRGB-E2S card from its packaging and
secure it rmly into the empty PCIe slot.
Reconnect all cables to the PC then connect the cable
distributing the RGB or DVI signals to the connectors on the
VisionRGB-E2S card located on the back panel.
Power up the PC and commence the software installation.
Screw the VisionRGB-E2S bracket to the back panel of the
PC and replace the cover.
Connect the cable(s) distributing the RGB or DVI signals to
the connectors on the VisionRGB-E2S card located on the
back panel. Reconnect all cables to the PC.
PACKING LIST HARDWARE INSTALLATION SOFTWARE INSTALLATION
Download the the required driver install.exe from the
Support pages on the Datapath website and follow the
Installation Wizard instructions as prompted.
We suggest that you regularly visit the Datapath web site
for information on updated drivers.
www.datapath.co.uk
It is strongly recommended that you read the detailed
help instructions on completion of the installation. Each
help topic may be printed for ease of use.