Datexx iTALK DF-8 User manual

DF-8
Talking Alarm Clock
Inserting the Batteries
Before using your iTALK, insert
two 1.5V AAA alkaline batteries:
1. Remove bottom screw with
supplied screwdriver.
2. Insert batteries, following
polarity diagram inside.
3. Replace the cover
and cover screw.
To Reset the Clock
Insert supplied screwdriver
into RESET hole.
www.datexx.com
Button
Chime
12/24
Min
Alarm
Hr
SET LIGHT
Reset Hole
(rear)
12/24
Hour
Display
(Speech
12 hr.
only) Backlight
Batteries
Datexx LimitedWarranty
This product is warranted against defects
for 1 year from date of purchase.
Return defective unit with proof of purchase
and a check or money order for $3.00 to:
Teledex Service Center,
1 Atlas st., Kenilworth, NJ, 07033.
TELEDEX INC.
1 Atlas St. Kenilworth, NJ 07033
DF-8 - Printed in China
Save Battery Power
Turn off Chime and
Alarm when not used.
When voice slows,
replace Batteries.
Set theTime
1. Press SET.
2. Press H and Mto set hour and minute.
3. Press SET twice.
Set the Alarm
1. Press SET twice.
2. Press Hand M to adjust
the Alarm hour and minute.
3. Press iTALK button to choose a
Chirping or Beeping sound.
4. Press SET.
5. Press ALM to turn on the Alarm.
When Alarm sounds:
Press iTALK button to snooze,
Press iTALK button twice to stop alarm.
Hourly Chime
Press CHIME for an
hourly time and
temperature report.