Dave Whites SitePro QUICKTIP 07-2090-135A User manual

This Prism Pole is designed for
versatility and compatible with any
QuickTip™ adapter to use with your
prism system or application.
Adapter Length Designed for Height of Target Item#
50-135 mm Most Prisms, Adjustable 50- 35mm 07-2090-135A
50 mm 1010, 9300N, Zeiss Prisms 100 mm 07-2090-50A
150 mm* GNSS Antenna -07-2090-150
*NOTE: The 07-2090-150 and 07-2090-135A are included with 07-4626-TM
Topographic Pole.
SitePro recommends
using an all-weather
adhesive to secure adapter to tip of pole. If
you intend interchanging this pole with
other QuickTip adapter, you may choose
to use a permanent adhesive. Follow
instructions on chosen adhesive. Apply to
adapter’s bottom 5/8-11 male end and
inner area of the female threads on pole
tip. Do not apply to flat surfaces of either
the adapter or pole tip.
LOCTITE
EPOXY/ADHESIVE
IMPORTANT:
Read Before Using
IMPORTANT:
Lire avant usage
IMPORTANTE:
Leer antes de usar
This Pole Includes
QUICKTIP™
ADAPTERS
07-2090-135A
07-2090-50A
07-2090-150*

INTENDED USE
Visit www.dwsitepro.com for more details about QuickTip Pole Adapters.
Available QuickTip Pole Adapters
Contact your local SitePro Dealer or Call Us at [phone].
Use the QuickTip Adapters on prism
pole to achieve a target height of
150 mm.
Simple to determine what adapter is
needed for your type of prism: 150
mm minus your target height =
length of adapter needed.
Quickly convert to another
application if desired by changing
adapters.
ADAPTER
LENGTH
HEIGHT OF
TARGET
150 mm
UM28-KS2L 00 81625502 01/2018 mq-marketing.com
©2018 Dave White’s SitePro LLC
Lafayette, IN USA
www.dwsitepro.com
Adapter Length Designed for Height of Target Item#
86-125 mm Swiss-Style, Adjust 86-125mm 07-2090-125A
15 mm Trimble RMT 135mm 07-2090-15
35 mm 2010M, 6400 115mm 07-2090-35
50 mm GPH1, 03-3024 86mm 07-2090-50
73 mm TopCon 360 Prisms 77mm 07-2090-73
80 mm Mini Prisms 70mm 07-2090-80
100 mm TopCon APT1, APT2 50mm 07-2090-100