DB POWER TD0557FBA User manual

USER Manual
Wi-Fi Endoscope
www.dbpower.co

www.dbpower.co
AT A GLANCE
LED battery
indicator
WI-FI Indicator
Flashlight Switch
USB Port
Flashlight
Power on/off
USB Charger
1

www.dbpower.co
METHOD OF USING
1. Download and install the “Wi-Fi View” app on your device
from Google Play Store or the APP Store.
(Note: Please make sure that the Wi-Fi transmitter is fully charged before using.)
2. Connect the endoscope camera and the Wi-Fi transmitter
via the Micro USB cable.
3. Press the on/off power button（the round button）for 2-5
seconds until the Wi-Fi indicator flickers red.
2

www.dbpower.co
4. Access your phone's Wi-Fi settings, find the wireless signal
named “PLX_Camera”, select that and input the password
“12345678" to connect to it.
5. Open the application “Wi-Fi View” and the endoscope image
will be displayed automatically.
Take a photograph
Video
Photo
Settings
3

www.dbpower.co
HOW TO USE THE CAMERA WITHOUT THE
WI-FI TRANSMITTER FOR LAPTOP DEVICES:
1. Install the Smart Camera.exe software from the supplied
CD, and then double-click it to open.
2. Connect the OTG adapter with the camera.
3. Plug it into the laptop’s USB port and the endoscope
image will be displayed automatically.
4

www.dbpower.co
1. Download and install the “Wi-Fi View” app on your device
from Google Play or the App Store.
FOR USE VIA ANDROID PHONE/TABLET MICRO USB
PORT:
2. Plug into an android phone though Micro USB port
X
Only applies to 3m and 5m cable.
3M 5M 10M
X
Only supports
OTG-enabled phones/tablets.
Does not support iPhones.
(Most Android phones are
OTG-enabled.)
5

www.dbpower.co
HOW TO USE THE LED FLASHLIGHT
Activate the light switch to turn on the endoscope’s LED light.
Turn on the flashlight
3.Open the application “Wi-Fi View” and the endoscope
image will be displayed automatically.
HOW TO CHARGE THE DEVICE AND CHECK THE
BATTERY LEVEL
6

www.dbpower.co
Pull out the USB connector on the back of the Wi-Fi
transmitter. Plug it into the USB port of a computer or other
suitable charging device.
On the Wi-Fi transmitter, four blue LED lights indicate 100%,
75%, 50%, and 25% of battery power, respectively. If no
lights are displayed, the device is powered off.
100%
75%
50%
25%
No lights on means power off
7

www.dbpower.co
HOW TO USE THE ACCESSORIES
1. Telescopic Handle
1
2 3
2. Magnet
1 2 3
3. Hook
4. Mirror
1
2
3
1 2
8

www.dbpower.co
PRODUCT PARAMETERS:
Sensor:
Resolution:
Photo resolution:
Video resolution:
Viewing angle:
Focal distance:
Interface:
LEDs:
Waterproof:
2.0 mega pixel
1600x1200 (YUV), 1280x720 (MJPG)
1600x1200
1280x720
60°
3-6CM
USB2.0
6 White LED Adjustable Lighting
IP67
PRODUCT LIST: ( x1 )
Wi-Fi
transmitter
Endoscope
camera User Manual Telescopic
handle
OTG Adapter Mirror Hook Magnet
9

www.dbpower.co
Q&A
10
Q: How long does it take to fully charge the Wi-Fi transmit-
ter?
A: Approximately 2 hours. This will give about 1-hour of use.
Q: Does it work directly connected to a device, without the
using the Wi-Fi transmitter?
A: Yes. Plug it into a laptop or Android device and open the
software/app. Please refer to page 4-5 for more details.
Q: Is the Wi-Fi transmitter rechargeable?
A: It’s rechargeable. Please refer to page 7 for more details.
Q: Why can I only see a blurred image?
A: The focal length of this endoscope is 1.18-3.15inch. A
sharp image can be achieved with a viewing distance of
about 3 to 6cm.
Q: What if I see a full black image with the letter “U” on my
phone/tablet after connecting it with the camera?

Q: How long does it take to fully charge the Wi-Fi transmit-
ter?
A: Approximately 2 hours. This will give about 1-hour of use.
Q: Does it work directly connected to a device, without the
using the Wi-Fi transmitter?
A: Yes. Plug it into a laptop or Android device and open the
software/app. Please refer to page 4-5 for more details.
Q: Is the Wi-Fi transmitter rechargeable?
A: It’s rechargeable. Please refer to page 7 for more details.
Q: Why can I only see a blurred image?
A: The focal length of this endoscope is 1.18-3.15inch. A
sharp image can be achieved with a viewing distance of
about 3 to 6cm.
Q: What if I see a full black image with the letter “U” on my
phone/tablet after connecting it with the camera?
www.dbpower.co
11
A: A black image with the letter “U” means there is a
problem with the camera. Please check if the USB cable
and port are well connected. You can also test the camera
by connecting it with a computer.
Q: Does the camera’s LED light need to be charged
separately?
A: No, it's powered by the Wi-Fi transmitter.
Q: What is the width of the scope minus the cable?
A: 8.5mm.
Q: Will this camera work in an area without Wi-Fi networks
present?
A: Yes. The device has its own Wi-Fi network to transmit the
camera’s image to your smartphone or tablet device

A: A black image with the letter “U” means there is a
problem with the camera. Please check if the USB cable
and port are well connected. You can also test the camera
by connecting it with a computer.
Q: Does the camera’s LED light need to be charged
separately?
A: No, it's powered by the Wi-Fi transmitter.
Q: What is the width of the scope minus the cable?
A: 8.5mm.
Q: Will this camera work in an area without Wi-Fi networks
present?
A: Yes. The device has its own Wi-Fi network to transmit the
camera’s image to your smartphone or tablet device
www.dbpower.co
CUSTOMER SERVICE
TWO-YEAR LIMITED WARRANTY
LIFETIME TECHNICAL SUPPORT
Contact us to get warranty or technical support
[e-mail]
12

FCC ID :2AKMMPLXWF2016
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference and (2) this device must accept any interference received,
including interference that may cause undesired operation.