DB POWER WF-200 User manual

Wi-Fi Endoscope
USER Manual

I. Descripon and Instrucons
This product is alightweight and portable Endoscope, which
adopts the latest wireless connecon technology to connect
with your mobile phone / computer equipment. It provides
reliable signal transmission and stable image transmission,
and it can support mulple terminal devices tobrowse
online at the same me! The product can be used in
automove maintenance, industrial tesng, pipeline tesng,
outdoor tesng and other fields. This product has built-in
800mAh baery, full charge is good for 90 minutes of
operaon. USB double sides charging is convenient for use.
①Baery LED Signal ② WiFi Operaon Signal
③USB Charger ④ LED Light
⑤ Camera Port ⑥Power ⑦ LED Light Switch
II.Usage scenarios
Maintenance and check of the car
Check of the pipeline and sewer
Check of the air-condioning and other equipment
Outdoor adventure(mouse hole and anthill)
III.WIFI camera operaon method
1. Open the package to remove the device, then put the
camera into the USB port above the WIFI box.
2. Press the power buon above the box WIFI for 1.5S,
then the first red LED light flashes once to show the
normal boot.
3. Android user: Search Mo-view in GooglePlay to
download and install. Or scan QR code below to
download.
IOS user: search Mo-view in APP STORE to download and
install. Or scan QR code below to download.
4.Open phone’s WLAN or WIFI sengs (phones have a
slight difference in seng), find wireless signal named
PLX_Camera (PLX camera), click it and then input the
password 12345678 to connect.
5. Open the applicaon for Mo-view, and the image will
be displayed automacally.
Mainly explained : On the WIFI box, the right four green
LED lights lit indicates that the baery is 100% , three
lights indicates 75% baery power, two lights indicates
50%, one light indicates 25%. If the lights are not lit, it
indicates that the baery power has been exhausted,
please charge before use. For charging, directly put the
USB head into the USB port of a computer or other
charging devices.LED light is a independent switch,
mainly for auxiliary lighng.
If you want to connect this camera via a computer, there
are two ways to achieve:
Method One: connected to the computer via USB
Open the package to remove the CD, then copy the
inside soware Smart camera.exe to the computer, and
then double-click it to open. Insert the USB endoscope
into the USB port on your computer and the image will
be displayed automacally.
Method two: Connected to the computer via WIFI
Open the package to remove the WIFI box, then insert
the USB endoscope and boot, search PLX_Camera in the
computer wireless network, double-click to input the
password 12345678 to connect to the network. Remove
the configured CD, copy the inside soware WIFI
View1.0.4.exe to computer, double-click it to install and
open. Click the Start buon in the soware, and
real-me image transmission starts.
If you want to directly connect the phone through the
use of Micro USB (must be Android system and the
phone itself opens OTG funcon), methods of operaon
as follows：
1.Insert the endoscope directly into the Micro USB port
with the OTG-enabled phone
2.Download the APP and install it. Scan the following QR
code to download or download via the following link.
hps://share.weiyun.com/c33bb7702e5d980ee9425
bd917b0077e
3. Open the installed APP , then the image will be
displayed automacally.
IV.Trouble clearing
1. Why can not it boot aer pressing the power buon,
and the baery power light will light up？
Answer：In order to avoid misoperaon, you can not
boot to press the power buon in short me, WIFI box
will work ll you are sure to press for 1.5 seconds. If the
power buon is shortly pressed, the baery capacity
indicator will light to suggest the remaining power, then
automacally shut down in 6 seconds.
2. Why can not my phone download APP?
Answer: It is possible that the telecom operator in your
area will limit the services we provide for the download
site (Android: Google Play, IOS: APP STORE) please
contact your sales for beer support. Or download the
installaon file via the following link.
The link is as follows
3.Why is there no image display when I open the APP?
Answer: Make sure it is turned on and WIFI is connected
to PLX_Camera.
4.Why is there an image aer opening APP, but the image
is blurred or unclear?
Answer: Make sure the object you are observing in the
effecve focal length range, we recommend the focal
length of 3-6CM; Please note that the front of the
camera to check if the glass surface is dirty, if dirty,
please use the cleaning cloth matched with product to
wipe the glass surface and then use
5. Aer a period of me, the screen will appear splash
screen or blurred screen, why ?
Answer: This phenomenon may be due to low baery,
please fully charged before using the product; then if the
baery is less than 5%, the image will exhibit unstable
behavior, such as the screen flash, blurred screen and so
on.
V. Product Parameters and Product List
Product parameters：
Sensor: 2.0Mega pixel
Resoluon: 1600x1200(YUV), 1280x720（MJPG）
Photo resoluon: 1600x1200
Video resoluon: 1280x720
View angle: 60°
Focal distance: 3-6CM
Interface: USB2.0
Light: 6LEDS
Waterproof: IP67
Product List：
WIFI box
USB endoscope
User manual
CD Driver
Hook
Magnet
Mirror
User Manual
WIFI Endoscope
1

I. Descripon and Instrucons
This product is alightweight and portable Endoscope, which
adopts the latest wireless connecon technology to connect
with your mobile phone / computer equipment. It provides
reliable signal transmission and stable image transmission,
and it can support mulple terminal devices tobrowse
online at the same me! The product can be used in
automove maintenance, industrial tesng, pipeline tesng,
outdoor tesng and other fields. This product has built-in
800mAh baery, full charge is good for 90 minutes of
operaon. USB double sides charging is convenient for use.
①Baery LED Signal ② WiFi Operaon Signal
③USB Charger ④ LED Light
⑤ Camera Port ⑥Power ⑦ LED Light Switch
II.Usage scenarios
Maintenance and check of the car
Check of the pipeline and sewer
Check of the air-condioning and other equipment
Outdoor adventure(mouse hole and anthill)
III.WIFI camera operaon method
1. Open the package to remove the device, then put the
camera into the USB port above the WIFI box.
2. Press the power buon above the box WIFI for 1.5S,
then the first red LED light flashes once to show the
normal boot.
3. Android user: Search Mo-view in GooglePlay to
download and install. Or scan QR code below to
download.
IOS user: search Mo-view in APP STORE to download and
install. Or scan QR code below to download.
4.Open phone’s WLAN or WIFI sengs (phones have a
slight difference in seng), find wireless signal named
PLX_Camera (PLX camera), click it and then input the
password 12345678 to connect.
5. Open the applicaon for Mo-view, and the image will
be displayed automacally.
Mainly explained : On the WIFI box, the right four green
LED lights lit indicates that the baery is 100% , three
lights indicates 75% baery power, two lights indicates
50%, one light indicates 25%. If the lights are not lit, it
indicates that the baery power has been exhausted,
please charge before use. For charging, directly put the
USB head into the USB port of a computer or other
charging devices.LED light is a independent switch,
mainly for auxiliary lighng.
If you want to connect this camera via a computer, there
are two ways to achieve:
Method One: connected to the computer via USB
Open the package to remove the CD, then copy the
inside soware Smart camera.exe to the computer, and
then double-click it to open. Insert the USB endoscope
into the USB port on your computer and the image will
be displayed automacally.
Method two: Connected to the computer via WIFI
Open the package to remove the WIFI box, then insert
the USB endoscope and boot, search PLX_Camera in the
computer wireless network, double-click to input the
password 12345678 to connect to the network. Remove
the configured CD, copy the inside soware WIFI
View1.0.4.exe to computer, double-click it to install and
open. Click the Start buon in the soware, and
real-me image transmission starts.
If you want to directly connect the phone through the
use of Micro USB (must be Android system and the
phone itself opens OTG funcon), methods of operaon
as follows：
1.Insert the endoscope directly into the Micro USB port
with the OTG-enabled phone
2.Download the APP and install it. Scan the following QR
code to download or download via the following link.
hps://share.weiyun.com/c33bb7702e5d980ee9425
bd917b0077e
3. Open the installed APP , then the image will be
displayed automacally.
IV.Trouble clearing
1. Why can not it boot aer pressing the power buon,
and the baery power light will light up？
Answer：In order to avoid misoperaon, you can not
boot to press the power buon in short me, WIFI box
will work ll you are sure to press for 1.5 seconds. If the
power buon is shortly pressed, the baery capacity
indicator will light to suggest the remaining power, then
automacally shut down in 6 seconds.
2. Why can not my phone download APP?
Answer: It is possible that the telecom operator in your
area will limit the services we provide for the download
site (Android: Google Play, IOS: APP STORE) please
contact your sales for beer support. Or download the
installaon file via the following link.
The link is as follows
3.Why is there no image display when I open the APP?
Answer: Make sure it is turned on and WIFI is connected
to PLX_Camera.
4.Why is there an image aer opening APP, but the image
is blurred or unclear?
Answer: Make sure the object you are observing in the
effecve focal length range, we recommend the focal
length of 3-6CM; Please note that the front of the
camera to check if the glass surface is dirty, if dirty,
please use the cleaning cloth matched with product to
wipe the glass surface and then use
5. Aer a period of me, the screen will appear splash
screen or blurred screen, why ?
Answer: This phenomenon may be due to low baery,
please fully charged before using the product; then if the
baery is less than 5%, the image will exhibit unstable
behavior, such as the screen flash, blurred screen and so
on.
V. Product Parameters and Product List
Product parameters：
Sensor: 2.0Mega pixel
Resoluon: 1600x1200(YUV), 1280x720（MJPG）
Photo resoluon: 1600x1200
Video resoluon: 1280x720
View angle: 60°
Focal distance: 3-6CM
Interface: USB2.0
Light: 6LEDS
Waterproof: IP67
Product List：
WIFI box
USB endoscope
User manual
CD Driver
Hook
Magnet
Mirror
2

I. Descripon and Instrucons
This product is alightweight and portable Endoscope, which
adopts the latest wireless connecon technology to connect
with your mobile phone / computer equipment. It provides
reliable signal transmission and stable image transmission,
and it can support mulple terminal devices tobrowse
online at the same me! The product can be used in
automove maintenance, industrial tesng, pipeline tesng,
outdoor tesng and other fields. This product has built-in
800mAh baery, full charge is good for 90 minutes of
operaon. USB double sides charging is convenient for use.
①Baery LED Signal ② WiFi Operaon Signal
③USB Charger ④ LED Light
⑤ Camera Port ⑥Power ⑦ LED Light Switch
II.Usage scenarios
Maintenance and check of the car
Check of the pipeline and sewer
Check of the air-condioning and other equipment
Outdoor adventure(mouse hole and anthill)
III.WIFI camera operaon method
1. Open the package to remove the device, then put the
camera into the USB port above the WIFI box.
2. Press the power buon above the box WIFI for 1.5S,
then the first red LED light flashes once to show the
normal boot.
3. Android user: Search Mo-view in GooglePlay to
download and install. Or scan QR code below to
download.
IOS user: search Mo-view in APP STORE to download and
install. Or scan QR code below to download.
4.Open phone’s WLAN or WIFI sengs (phones have a
slight difference in seng), find wireless signal named
PLX_Camera (PLX camera), click it and then input the
password 12345678 to connect.
5. Open the applicaon for Mo-view, and the image will
be displayed automacally.
Mainly explained : On the WIFI box, the right four green
LED lights lit indicates that the baery is 100% , three
lights indicates 75% baery power, two lights indicates
50%, one light indicates 25%. If the lights are not lit, it
indicates that the baery power has been exhausted,
please charge before use. For charging, directly put the
USB head into the USB port of a computer or other
charging devices.LED light is a independent switch,
mainly for auxiliary lighng.
If you want to connect this camera via a computer, there
are two ways to achieve:
Method One: connected to the computer via USB
Open the package to remove the CD, then copy the
inside soware Smart camera.exe to the computer, and
then double-click it to open. Insert the USB endoscope
into the USB port on your computer and the image will
be displayed automacally.
Method two: Connected to the computer via WIFI
Open the package to remove the WIFI box, then insert
the USB endoscope and boot, search PLX_Camera in the
computer wireless network, double-click to input the
password 12345678 to connect to the network. Remove
the configured CD, copy the inside soware WIFI
View1.0.4.exe to computer, double-click it to install and
open. Click the Start buon in the soware, and
real-me image transmission starts.
If you want to directly connect the phone through the
use of Micro USB (must be Android system and the
phone itself opens OTG funcon), methods of operaon
as follows：
1.Insert the endoscope directly into the Micro USB port
with the OTG-enabled phone
2.Download the APP and install it. Scan the following QR
code to download or download via the following link.
hps://share.weiyun.com/c33bb7702e5d980ee9425
bd917b0077e
3. Open the installed APP , then the image will be
displayed automacally.
IV.Trouble clearing
1. Why can not it boot aer pressing the power buon,
and the baery power light will light up？
Answer：In order to avoid misoperaon, you can not
boot to press the power buon in short me, WIFI box
will work ll you are sure to press for 1.5 seconds. If the
power buon is shortly pressed, the baery capacity
indicator will light to suggest the remaining power, then
automacally shut down in 6 seconds.
2. Why can not my phone download APP?
Answer: It is possible that the telecom operator in your
area will limit the services we provide for the download
site (Android: Google Play, IOS: APP STORE) please
contact your sales for beer support. Or download the
installaon file via the following link.
The link is as follows
3.Why is there no image display when I open the APP?
Answer: Make sure it is turned on and WIFI is connected
to PLX_Camera.
4.Why is there an image aer opening APP, but the image
is blurred or unclear?
Answer: Make sure the object you are observing in the
effecve focal length range, we recommend the focal
length of 3-6CM; Please note that the front of the
camera to check if the glass surface is dirty, if dirty,
please use the cleaning cloth matched with product to
wipe the glass surface and then use
5. Aer a period of me, the screen will appear splash
screen or blurred screen, why ?
Answer: This phenomenon may be due to low baery,
please fully charged before using the product; then if the
baery is less than 5%, the image will exhibit unstable
behavior, such as the screen flash, blurred screen and so
on.
V. Product Parameters and Product List
Product parameters：
Sensor: 2.0Mega pixel
Resoluon: 1600x1200(YUV), 1280x720（MJPG）
Photo resoluon: 1600x1200
Video resoluon: 1280x720
View angle: 60°
Focal distance: 3-6CM
Interface: USB2.0
Light: 6LEDS
Waterproof: IP67
Product List：
WIFI box
USB endoscope
User manual
CD Driver
Hook
Magnet
Mirror
3

I. Descripon and Instrucons
This product is alightweight and portable Endoscope, which
adopts the latest wireless connecon technology to connect
with your mobile phone / computer equipment. It provides
reliable signal transmission and stable image transmission,
and it can support mulple terminal devices tobrowse
online at the same me! The product can be used in
automove maintenance, industrial tesng, pipeline tesng,
outdoor tesng and other fields. This product has built-in
800mAh baery, full charge is good for 90 minutes of
operaon. USB double sides charging is convenient for use.
①Baery LED Signal ② WiFi Operaon Signal
③USB Charger ④ LED Light
⑤ Camera Port ⑥Power ⑦ LED Light Switch
II.Usage scenarios
Maintenance and check of the car
Check of the pipeline and sewer
Check of the air-condioning and other equipment
Outdoor adventure(mouse hole and anthill)
III.WIFI camera operaon method
1. Open the package to remove the device, then put the
camera into the USB port above the WIFI box.
2. Press the power buon above the box WIFI for 1.5S,
then the first red LED light flashes once to show the
normal boot.
3. Android user: Search Mo-view in GooglePlay to
download and install. Or scan QR code below to
download.
IOS user: search Mo-view in APP STORE to download and
install. Or scan QR code below to download.
4.Open phone’s WLAN or WIFI sengs (phones have a
slight difference in seng), find wireless signal named
PLX_Camera (PLX camera), click it and then input the
password 12345678 to connect.
5. Open the applicaon for Mo-view, and the image will
be displayed automacally.
Mainly explained : On the WIFI box, the right four green
LED lights lit indicates that the baery is 100% , three
lights indicates 75% baery power, two lights indicates
50%, one light indicates 25%. If the lights are not lit, it
indicates that the baery power has been exhausted,
please charge before use. For charging, directly put the
USB head into the USB port of a computer or other
charging devices.LED light is a independent switch,
mainly for auxiliary lighng.
If you want to connect this camera via a computer, there
are two ways to achieve:
Method One: connected to the computer via USB
Open the package to remove the CD, then copy the
inside soware Smart camera.exe to the computer, and
then double-click it to open. Insert the USB endoscope
into the USB port on your computer and the image will
be displayed automacally.
Method two: Connected to the computer via WIFI
Open the package to remove the WIFI box, then insert
the USB endoscope and boot, search PLX_Camera in the
computer wireless network, double-click to input the
password 12345678 to connect to the network. Remove
the configured CD, copy the inside soware WIFI
View1.0.4.exe to computer, double-click it to install and
open. Click the Start buon in the soware, and
real-me image transmission starts.
If you want to directly connect the phone through the
use of Micro USB (must be Android system and the
phone itself opens OTG funcon), methods of operaon
as follows：
1.Insert the endoscope directly into the Micro USB port
with the OTG-enabled phone
2.Download the APP and install it. Scan the following QR
code to download or download via the following link.
hps://share.weiyun.com/c33bb7702e5d980ee9425
bd917b0077e
3. Open the installed APP , then the image will be
displayed automacally.
IV.Trouble clearing
1. Why can not it boot aer pressing the power buon,
and the baery power light will light up？
Answer：In order to avoid misoperaon, you can not
boot to press the power buon in short me, WIFI box
will work ll you are sure to press for 1.5 seconds. If the
power buon is shortly pressed, the baery capacity
indicator will light to suggest the remaining power, then
automacally shut down in 6 seconds.
2. Why can not my phone download APP?
Answer: It is possible that the telecom operator in your
area will limit the services we provide for the download
site (Android: Google Play, IOS: APP STORE) please
contact your sales for beer support. Or download the
installaon file via the following link.
The link is as follows
3.Why is there no image display when I open the APP?
Answer: Make sure it is turned on and WIFI is connected
to PLX_Camera.
4.Why is there an image aer opening APP, but the image
is blurred or unclear?
Answer: Make sure the object you are observing in the
effecve focal length range, we recommend the focal
length of 3-6CM; Please note that the front of the
camera to check if the glass surface is dirty, if dirty,
please use the cleaning cloth matched with product to
wipe the glass surface and then use
5. Aer a period of me, the screen will appear splash
screen or blurred screen, why ?
Answer: This phenomenon may be due to low baery,
please fully charged before using the product; then if the
baery is less than 5%, the image will exhibit unstable
behavior, such as the screen flash, blurred screen and so
on.
V. Product Parameters and Product List
Product parameters：
Sensor: 2.0Mega pixel
Resoluon: 1600x1200(YUV), 1280x720（MJPG）
Photo resoluon: 1600x1200
Video resoluon: 1280x720
View angle: 60°
Focal distance: 3-6CM
Interface: USB2.0
Light: 6LEDS
Waterproof: IP67
Product List：
WIFI box
USB endoscope
User manual
CD Driver
Hook
Magnet
Mirror
4

I. Descripon and Instrucons
This product is alightweight and portable Endoscope, which
adopts the latest wireless connecon technology to connect
with your mobile phone / computer equipment. It provides
reliable signal transmission and stable image transmission,
and it can support mulple terminal devices tobrowse
online at the same me! The product can be used in
automove maintenance, industrial tesng, pipeline tesng,
outdoor tesng and other fields. This product has built-in
800mAh baery, full charge is good for 90 minutes of
operaon. USB double sides charging is convenient for use.
①Baery LED Signal ② WiFi Operaon Signal
③USB Charger ④ LED Light
⑤ Camera Port ⑥Power ⑦ LED Light Switch
II.Usage scenarios
Maintenance and check of the car
Check of the pipeline and sewer
Check of the air-condioning and other equipment
Outdoor adventure(mouse hole and anthill)
III.WIFI camera operaon method
1. Open the package to remove the device, then put the
camera into the USB port above the WIFI box.
2. Press the power buon above the box WIFI for 1.5S,
then the first red LED light flashes once to show the
normal boot.
3. Android user: Search Mo-view in GooglePlay to
download and install. Or scan QR code below to
download.
IOS user: search Mo-view in APP STORE to download and
install. Or scan QR code below to download.
4.Open phone’s WLAN or WIFI sengs (phones have a
slight difference in seng), find wireless signal named
PLX_Camera (PLX camera), click it and then input the
password 12345678 to connect.
5. Open the applicaon for Mo-view, and the image will
be displayed automacally.
Mainly explained : On the WIFI box, the right four green
LED lights lit indicates that the baery is 100% , three
lights indicates 75% baery power, two lights indicates
50%, one light indicates 25%. If the lights are not lit, it
indicates that the baery power has been exhausted,
please charge before use. For charging, directly put the
USB head into the USB port of a computer or other
charging devices.LED light is a independent switch,
mainly for auxiliary lighng.
If you want to connect this camera via a computer, there
are two ways to achieve:
Method One: connected to the computer via USB
Open the package to remove the CD, then copy the
inside soware Smart camera.exe to the computer, and
then double-click it to open. Insert the USB endoscope
into the USB port on your computer and the image will
be displayed automacally.
Method two: Connected to the computer via WIFI
Open the package to remove the WIFI box, then insert
the USB endoscope and boot, search PLX_Camera in the
computer wireless network, double-click to input the
password 12345678 to connect to the network. Remove
the configured CD, copy the inside soware WIFI
View1.0.4.exe to computer, double-click it to install and
open. Click the Start buon in the soware, and
real-me image transmission starts.
If you want to directly connect the phone through the
use of Micro USB (must be Android system and the
phone itself opens OTG funcon), methods of operaon
as follows：
1.Insert the endoscope directly into the Micro USB port
with the OTG-enabled phone
2.Download the APP and install it. Scan the following QR
code to download or download via the following link.
hps://share.weiyun.com/c33bb7702e5d980ee9425
bd917b0077e
3. Open the installed APP , then the image will be
displayed automacally.
IV.Trouble clearing
1. Why can not it boot aer pressing the power buon,
and the baery power light will light up？
Answer：In order to avoid misoperaon, you can not
boot to press the power buon in short me, WIFI box
will work ll you are sure to press for 1.5 seconds. If the
power buon is shortly pressed, the baery capacity
indicator will light to suggest the remaining power, then
automacally shut down in 6 seconds.
2. Why can not my phone download APP?
Answer: It is possible that the telecom operator in your
area will limit the services we provide for the download
site (Android: Google Play, IOS: APP STORE) please
contact your sales for beer support. Or download the
installaon file via the following link.
The link is as follows
3.Why is there no image display when I open the APP?
Answer: Make sure it is turned on and WIFI is connected
to PLX_Camera.
4.Why is there an image aer opening APP, but the image
is blurred or unclear?
Answer: Make sure the object you are observing in the
effecve focal length range, we recommend the focal
length of 3-6CM; Please note that the front of the
camera to check if the glass surface is dirty, if dirty,
please use the cleaning cloth matched with product to
wipe the glass surface and then use
5. Aer a period of me, the screen will appear splash
screen or blurred screen, why ?
Answer: This phenomenon may be due to low baery,
please fully charged before using the product; then if the
baery is less than 5%, the image will exhibit unstable
behavior, such as the screen flash, blurred screen and so
on.
V. Product Parameters and Product List
Product parameters：
Sensor: 2.0Mega pixel
Resoluon: 1600x1200(YUV), 1280x720（MJPG）
Photo resoluon: 1600x1200
Video resoluon: 1280x720
View angle: 60°
Focal distance: 3-6CM
Interface: USB2.0
Light: 6LEDS
Waterproof: IP67
Product List：
WIFI box
USB endoscope
User manual
CD Driver
Hook
Magnet
Mirror
5

I. Descripon and Instrucons
This product is alightweight and portable Endoscope, which
adopts the latest wireless connecon technology to connect
with your mobile phone / computer equipment. It provides
reliable signal transmission and stable image transmission,
and it can support mulple terminal devices tobrowse
online at the same me! The product can be used in
automove maintenance, industrial tesng, pipeline tesng,
outdoor tesng and other fields. This product has built-in
800mAh baery, full charge is good for 90 minutes of
operaon. USB double sides charging is convenient for use.
①Baery LED Signal ② WiFi Operaon Signal
③USB Charger ④ LED Light
⑤ Camera Port ⑥Power ⑦ LED Light Switch
II.Usage scenarios
Maintenance and check of the car
Check of the pipeline and sewer
Check of the air-condioning and other equipment
Outdoor adventure(mouse hole and anthill)
III.WIFI camera operaon method
1. Open the package to remove the device, then put the
camera into the USB port above the WIFI box.
2. Press the power buon above the box WIFI for 1.5S,
then the first red LED light flashes once to show the
normal boot.
3. Android user: Search Mo-view in GooglePlay to
download and install. Or scan QR code below to
download.
IOS user: search Mo-view in APP STORE to download and
install. Or scan QR code below to download.
4.Open phone’s WLAN or WIFI sengs (phones have a
slight difference in seng), find wireless signal named
PLX_Camera (PLX camera), click it and then input the
password 12345678 to connect.
5. Open the applicaon for Mo-view, and the image will
be displayed automacally.
Mainly explained : On the WIFI box, the right four green
LED lights lit indicates that the baery is 100% , three
lights indicates 75% baery power, two lights indicates
50%, one light indicates 25%. If the lights are not lit, it
indicates that the baery power has been exhausted,
please charge before use. For charging, directly put the
USB head into the USB port of a computer or other
charging devices.LED light is a independent switch,
mainly for auxiliary lighng.
If you want to connect this camera via a computer, there
are two ways to achieve:
Method One: connected to the computer via USB
Open the package to remove the CD, then copy the
inside soware Smart camera.exe to the computer, and
then double-click it to open. Insert the USB endoscope
into the USB port on your computer and the image will
be displayed automacally.
Method two: Connected to the computer via WIFI
Open the package to remove the WIFI box, then insert
the USB endoscope and boot, search PLX_Camera in the
computer wireless network, double-click to input the
password 12345678 to connect to the network. Remove
the configured CD, copy the inside soware WIFI
View1.0.4.exe to computer, double-click it to install and
open. Click the Start buon in the soware, and
real-me image transmission starts.
If you want to directly connect the phone through the
use of Micro USB (must be Android system and the
phone itself opens OTG funcon), methods of operaon
as follows：
1.Insert the endoscope directly into the Micro USB port
with the OTG-enabled phone
2.Download the APP and install it. Scan the following QR
code to download or download via the following link.
hps://share.weiyun.com/c33bb7702e5d980ee9425
bd917b0077e
3. Open the installed APP , then the image will be
displayed automacally.
IV.Trouble clearing
1. Why can not it boot aer pressing the power buon,
and the baery power light will light up？
Answer：In order to avoid misoperaon, you can not
boot to press the power buon in short me, WIFI box
will work ll you are sure to press for 1.5 seconds. If the
power buon is shortly pressed, the baery capacity
indicator will light to suggest the remaining power, then
automacally shut down in 6 seconds.
2. Why can not my phone download APP?
Answer: It is possible that the telecom operator in your
area will limit the services we provide for the download
site (Android: Google Play, IOS: APP STORE) please
contact your sales for beer support. Or download the
installaon file via the following link.
The link is as follows
3.Why is there no image display when I open the APP?
Answer: Make sure it is turned on and WIFI is connected
to PLX_Camera.
4.Why is there an image aer opening APP, but the image
is blurred or unclear?
Answer: Make sure the object you are observing in the
effecve focal length range, we recommend the focal
length of 3-6CM; Please note that the front of the
camera to check if the glass surface is dirty, if dirty,
please use the cleaning cloth matched with product to
wipe the glass surface and then use
5. Aer a period of me, the screen will appear splash
screen or blurred screen, why ?
Answer: This phenomenon may be due to low baery,
please fully charged before using the product; then if the
baery is less than 5%, the image will exhibit unstable
behavior, such as the screen flash, blurred screen and so
on.
V. Product Parameters and Product List
Product parameters：
Sensor: 2.0Mega pixel
Resoluon: 1600x1200(YUV), 1280x720（MJPG）
Photo resoluon: 1600x1200
Video resoluon: 1280x720
View angle: 60°
Focal distance: 3-6CM
Interface: USB2.0
Light: 6LEDS
Waterproof: IP67
Product List：
WIFI box
USB endoscope
User manual
CD Driver
Hook
Magnet
Mirror
6

I. Descripon and Instrucons
This product is alightweight and portable Endoscope, which
adopts the latest wireless connecon technology to connect
with your mobile phone / computer equipment. It provides
reliable signal transmission and stable image transmission,
and it can support mulple terminal devices tobrowse
online at the same me! The product can be used in
automove maintenance, industrial tesng, pipeline tesng,
outdoor tesng and other fields. This product has built-in
800mAh baery, full charge is good for 90 minutes of
operaon. USB double sides charging is convenient for use.
①Baery LED Signal ② WiFi Operaon Signal
③USB Charger ④ LED Light
⑤ Camera Port ⑥Power ⑦ LED Light Switch
II.Usage scenarios
Maintenance and check of the car
Check of the pipeline and sewer
Check of the air-condioning and other equipment
Outdoor adventure(mouse hole and anthill)
III.WIFI camera operaon method
1. Open the package to remove the device, then put the
camera into the USB port above the WIFI box.
2. Press the power buon above the box WIFI for 1.5S,
then the first red LED light flashes once to show the
normal boot.
3. Android user: Search Mo-view in GooglePlay to
download and install. Or scan QR code below to
download.
IOS user: search Mo-view in APP STORE to download and
install. Or scan QR code below to download.
4.Open phone’s WLAN or WIFI sengs (phones have a
slight difference in seng), find wireless signal named
PLX_Camera (PLX camera), click it and then input the
password 12345678 to connect.
5. Open the applicaon for Mo-view, and the image will
be displayed automacally.
Mainly explained : On the WIFI box, the right four green
LED lights lit indicates that the baery is 100% , three
lights indicates 75% baery power, two lights indicates
50%, one light indicates 25%. If the lights are not lit, it
indicates that the baery power has been exhausted,
please charge before use. For charging, directly put the
USB head into the USB port of a computer or other
charging devices.LED light is a independent switch,
mainly for auxiliary lighng.
If you want to connect this camera via a computer, there
are two ways to achieve:
Method One: connected to the computer via USB
Open the package to remove the CD, then copy the
inside soware Smart camera.exe to the computer, and
then double-click it to open. Insert the USB endoscope
into the USB port on your computer and the image will
be displayed automacally.
Method two: Connected to the computer via WIFI
Open the package to remove the WIFI box, then insert
the USB endoscope and boot, search PLX_Camera in the
computer wireless network, double-click to input the
password 12345678 to connect to the network. Remove
the configured CD, copy the inside soware WIFI
View1.0.4.exe to computer, double-click it to install and
open. Click the Start buon in the soware, and
real-me image transmission starts.
If you want to directly connect the phone through the
use of Micro USB (must be Android system and the
phone itself opens OTG funcon), methods of operaon
as follows：
1.Insert the endoscope directly into the Micro USB port
with the OTG-enabled phone
2.Download the APP and install it. Scan the following QR
code to download or download via the following link.
hps://share.weiyun.com/c33bb7702e5d980ee9425
bd917b0077e
3. Open the installed APP , then the image will be
displayed automacally.
IV.Trouble clearing
1. Why can not it boot aer pressing the power buon,
and the baery power light will light up？
Answer：In order to avoid misoperaon, you can not
boot to press the power buon in short me, WIFI box
will work ll you are sure to press for 1.5 seconds. If the
power buon is shortly pressed, the baery capacity
indicator will light to suggest the remaining power, then
automacally shut down in 6 seconds.
2. Why can not my phone download APP?
Answer: It is possible that the telecom operator in your
area will limit the services we provide for the download
site (Android: Google Play, IOS: APP STORE) please
contact your sales for beer support. Or download the
installaon file via the following link.
The link is as follows
3.Why is there no image display when I open the APP?
Answer: Make sure it is turned on and WIFI is connected
to PLX_Camera.
4.Why is there an image aer opening APP, but the image
is blurred or unclear?
Answer: Make sure the object you are observing in the
effecve focal length range, we recommend the focal
length of 3-6CM; Please note that the front of the
camera to check if the glass surface is dirty, if dirty,
please use the cleaning cloth matched with product to
wipe the glass surface and then use
5. Aer a period of me, the screen will appear splash
screen or blurred screen, why ?
Answer: This phenomenon may be due to low baery,
please fully charged before using the product; then if the
baery is less than 5%, the image will exhibit unstable
behavior, such as the screen flash, blurred screen and so
on.
V. Product Parameters and Product List
Product parameters：
Sensor: 2.0Mega pixel
Resoluon: 1600x1200(YUV), 1280x720（MJPG）
Photo resoluon: 1600x1200
Video resoluon: 1280x720
View angle: 60°
Focal distance: 3-6CM
Interface: USB2.0
Light: 6LEDS
Waterproof: IP67
Product List：
WIFI box
USB endoscope
User manual
CD Driver
Hook
Magnet
Mirror
7

I. Descripon and Instrucons
This product is alightweight and portable Endoscope, which
adopts the latest wireless connecon technology to connect
with your mobile phone / computer equipment. It provides
reliable signal transmission and stable image transmission,
and it can support mulple terminal devices tobrowse
online at the same me! The product can be used in
automove maintenance, industrial tesng, pipeline tesng,
outdoor tesng and other fields. This product has built-in
800mAh baery, full charge is good for 90 minutes of
operaon. USB double sides charging is convenient for use.
①Baery LED Signal ② WiFi Operaon Signal
③USB Charger ④ LED Light
⑤ Camera Port ⑥Power ⑦ LED Light Switch
II.Usage scenarios
Maintenance and check of the car
Check of the pipeline and sewer
Check of the air-condioning and other equipment
Outdoor adventure(mouse hole and anthill)
III.WIFI camera operaon method
1. Open the package to remove the device, then put the
camera into the USB port above the WIFI box.
2. Press the power buon above the box WIFI for 1.5S,
then the first red LED light flashes once to show the
normal boot.
3. Android user: Search Mo-view in GooglePlay to
download and install. Or scan QR code below to
download.
IOS user: search Mo-view in APP STORE to download and
install. Or scan QR code below to download.
4.Open phone’s WLAN or WIFI sengs (phones have a
slight difference in seng), find wireless signal named
PLX_Camera (PLX camera), click it and then input the
password 12345678 to connect.
5. Open the applicaon for Mo-view, and the image will
be displayed automacally.
Mainly explained : On the WIFI box, the right four green
LED lights lit indicates that the baery is 100% , three
lights indicates 75% baery power, two lights indicates
50%, one light indicates 25%. If the lights are not lit, it
indicates that the baery power has been exhausted,
please charge before use. For charging, directly put the
USB head into the USB port of a computer or other
charging devices.LED light is a independent switch,
mainly for auxiliary lighng.
If you want to connect this camera via a computer, there
are two ways to achieve:
Method One: connected to the computer via USB
Open the package to remove the CD, then copy the
inside soware Smart camera.exe to the computer, and
then double-click it to open. Insert the USB endoscope
into the USB port on your computer and the image will
be displayed automacally.
Method two: Connected to the computer via WIFI
Open the package to remove the WIFI box, then insert
the USB endoscope and boot, search PLX_Camera in the
computer wireless network, double-click to input the
password 12345678 to connect to the network. Remove
the configured CD, copy the inside soware WIFI
View1.0.4.exe to computer, double-click it to install and
open. Click the Start buon in the soware, and
real-me image transmission starts.
If you want to directly connect the phone through the
use of Micro USB (must be Android system and the
phone itself opens OTG funcon), methods of operaon
as follows：
1.Insert the endoscope directly into the Micro USB port
with the OTG-enabled phone
2.Download the APP and install it. Scan the following QR
code to download or download via the following link.
hps://share.weiyun.com/c33bb7702e5d980ee9425
bd917b0077e
3. Open the installed APP , then the image will be
displayed automacally.
IV.Trouble clearing
1. Why can not it boot aer pressing the power buon,
and the baery power light will light up？
Answer：In order to avoid misoperaon, you can not
boot to press the power buon in short me, WIFI box
will work ll you are sure to press for 1.5 seconds. If the
power buon is shortly pressed, the baery capacity
indicator will light to suggest the remaining power, then
automacally shut down in 6 seconds.
2. Why can not my phone download APP?
Answer: It is possible that the telecom operator in your
area will limit the services we provide for the download
site (Android: Google Play, IOS: APP STORE) please
contact your sales for beer support. Or download the
installaon file via the following link.
The link is as follows
3.Why is there no image display when I open the APP?
Answer: Make sure it is turned on and WIFI is connected
to PLX_Camera.
4.Why is there an image aer opening APP, but the image
is blurred or unclear?
Answer: Make sure the object you are observing in the
effecve focal length range, we recommend the focal
length of 3-6CM; Please note that the front of the
camera to check if the glass surface is dirty, if dirty,
please use the cleaning cloth matched with product to
wipe the glass surface and then use
5. Aer a period of me, the screen will appear splash
screen or blurred screen, why ?
Answer: This phenomenon may be due to low baery,
please fully charged before using the product; then if the
baery is less than 5%, the image will exhibit unstable
behavior, such as the screen flash, blurred screen and so
on.
V. Product Parameters and Product List
Product parameters：
Sensor: 2.0Mega pixel
Resoluon: 1600x1200(YUV), 1280x720（MJPG）
Photo resoluon: 1600x1200
Video resoluon: 1280x720
View angle: 60°
Focal distance: 3-6CM
Interface: USB2.0
Light: 6LEDS
Waterproof: IP67
Product List：
WIFI box
USB endoscope
User manual
CD Driver
Hook
Magnet
Mirror
8