DCG Professional Barber HSM1101 User manual

HSM1101 PROFESSIONAL BARBER
TAGLIACAPELLI REGOLABARBA RICARICABILE
RECHARGEABLE HAIR & BEARD TRIMMER
MANUALE D’ISTRUZIONI - INSTRUCTION MANUAL dcg16.it
BELLEZZA

Manuale d’istruzioni HSM1101 PROFESSIONAL BARBER
dcg16.it
1
CARATTERISTICHE TECNICHE - TECHNICAL FEATURES
Batteria: 3,6 V 3400 mAh
1. Avvertenze
• Prima dell’uso, leggere attentamente queste istruzioni.
• Conservare le istruzioni per consultazioni future.
• Controllare che le caratteristiche dell’impianto domestico siano
compatibili con quelle indicate sull’apparecchio.
• L’apparecchio è destinato esclusivamente all’uso domestico e
nelle seguenti situazioni:
- cucine a uso del personale di negozi, ufci e altri ambienti di lavoro;
- da parte di clienti di hotel, motel e altri tipi di ambienti residenziali;
- strutture come agriturismi e bed & breakfast.
• Usare l’apparecchio esclusivamente nei modi indicati in queste
istruzioni.
• Informare i potenziali utenti dell’esistenza di queste istruzioni.
• Non lasciare incustodito l’apparecchio mentre è in funzione.
• L’apparecchio deve essere usato esclusivamente per gli scopi
per i quali è stato progettato. Si declina ogni responsabilità per
eventuali danni causati da un utilizzo scorretto o da una gestione
impropria.
• I bambini e le persone con disabilità non sempre sono consapevoli
dei pericoli derivanti dall’uso di apparecchiature elettriche.
• L’uso di questo apparecchio non è indicato per i bambini di età
inferiore agli 8 anni e per persone con ridotte capacità siche,
sensoriali o mentali, mancanza di esperienza e conoscenze, a
meno che ricevano supervisione o indicazioni sul suo utilizzo e
comprendano i pericoli ad esso collegati.
• Le operazioni di pulizia e manutenzione possono essere svolte da
bambini con la supervisione di un adulto.

Manuale d’istruzioni HSM1101 PROFESSIONAL BARBER
dcg16.it
2
• Questo apparecchio non è un giocattolo; tenerlo fuori dalla portata
di bambini e persone con disabilità.
• Per garantire la sicurezza dei bambini, tenere tutti i materiali di
imballaggio (sacchetti di plastica, scatole, polistirolo ecc.) fuori
dalla loro portata.
• Attenzione! Non permettere ai bambini piccoli di giocare con la
lamina:
PERICOLO DI SOFFOCAMENTO!
• Non immergere l’apparecchio in acqua o altro liquido per nessuna
ragione.
• Non metterlo in lavastoviglie.
• Non usarlo vicino a superci calde.
• Non usarlo all’aperto e collocarlo sempre in un luogo asciutto.
• Non usare accessori non raccomandati dal produttore, che
potrebbero rappresentare un pericolo per l’utente e rischiano di
danneggiare l’apparecchio.
• Prima di pulire e riporre l’apparecchio, assicurarsi che si sia
raffreddato.
• Questo apparecchio non è progettato per essere messo in funzione
tramite timer esterni o telecomandi.
• Collocarlo sempre su una supercie piana, assicurandosi inoltre di
non coprirlo e di non appoggiare oggetti su di esso.
• Un utilizzo improprio e un funzionamento scorretto possono
causare danni all’apparecchio e all’utente.
• Questo apparecchio, progettato per uso domestico, è conforme
agli standard relativi a questo tipo di prodotto.
• Se è caduto o se presenta segni visibili di danni, non usarlo.
• Questo apparecchio è destinato esclusivamente all’uso domestico.
• Per le operazioni di pulizia, fare riferimento al relativo paragrafo
del manuale.

Manuale d’istruzioni HSM1101 PROFESSIONAL BARBER
dcg16.it
3
2. Specichetecniche
Batteria al litio ricaricabile
Tensione nominale: 3,7 V
Tempo di ricarica: circa 120 minuti
Durata della batteria: circa 120 minuti
Capacità: 1400 mAh
Adattatore
Input: 100-240 V 50/60 Hz
Output: DC 5,0 V 1 A
Potenza: 3 W
3. Avvertenze
Prima dell’uso, aggiungere olio nel
tagliacapelli (fare riferimento alla gura).
Durante l’uso e la ricarica, l’apparecchio
potrebbe scaldarsi un po’, senza
conseguenze sulle prestazioni.
Aggiungere una goccia di olio in
ciascuno dei punti indicati.
• Aggiungere l’olio nei punti indicati dai circoletti.
• Non pulire l’apparecchio con benzina, alcol o solventi, onde
evitare effetti sul colore del rivestimento.
• Pulirlo con acqua e sapone.
• Non ricaricarlo se la temperatura ambiente è superiore a 40 °C o
inferiore a 0 °C.
• Tenerlo fuori dalla portata dei bambini, onde evitare che si taglino
con la lama o inghiottano le piccole parti.

Manuale d’istruzioni HSM1101 PROFESSIONAL BARBER
dcg16.it
4
4.Nome delle parti
Note:
• Il prodotto può essere usato con o senza cavo di alimentazione.
• Se il prodotto viene regolato sulla velocità II, sul display LED appare l’icona gialla Turbo.
• Le cifre bianche (da 1 a 99) sul display indicano la percentuale di carica della batteria.
Display LED
Interruttore
Adattatore
Lama
Velocità I Velocità II
Base di ricarica
Accessori
Olio Pennellino

Manuale d’istruzioni HSM1101 PROFESSIONAL BARBER
dcg16.it
5
5. Regolazione del taglio
6. Metodo di ricarica
• Inserire il connettore dell’adattatore nella porta
della base dell’apparecchio.
• Assicurarsi che l’apparecchio sia spento, quindi
collegare la spina dell’adattatore alla presa di
corrente. Sul display appaiono l’icona rossa che
rafgura una spina e la percentuale di carica
rimasta. Quando il tagliacapelli sarà completamente carico, sul display
apparirà il numero 99 e l’icona rossa della spina sarà accesa. 3 minuti dopo
il termine della carica, solo l’icona rossa sarà visibile.
• Il tempo di ricarica è di circa 2 ore.
• Quando la carica scende al di sotto del 15%, l’icona rossa che rafgura la
spina lampeggia.
• Se si utilizza la base di ricarica, collegare l’adattatore alla base, quindi
collegare la spina alla presa di corrente. A questo punto inserire
l’apparecchio nella base per iniziare la ricarica.
Scegliere il pettine guida
delle dimensioni adatte alle
necessità
Farlo combaciare
con la lama
e ssarlo al
Estrarlo come
indicato nella
gura

Manuale d’istruzioni HSM1101 PROFESSIONAL BARBER
dcg16.it
6
7. Avvertenze sulla ricarica
• Note: Se il prodotto non verrà usato per un lungo periodo,
assicurarsi di ricaricare la batteria almeno una volta ogni
3 mesi, onde evitare danni. Funzione Plug-and-play: se la
potenza è insufciente, è possibile usare l’apparecchio
anche mentre è in carica.
• Inserire il connettore dell’adattatore nella porta del
tagliacapelli, quindi collegare la spina alla presa di corrente. A questo punto,
accendere il tagliacapelli e usarlo normalmente.
• Al termine dell’utilizzo, spegnere l’apparecchio e scollegare il connettore
dell’adattatore.
• Se la batteria è scarica, potrebbe essere difcile accendere l’apparecchio anche
se la spina è collegata alla presa di corrente.
Lasciarlo in carica per almeno uno o due
minuti, quindi riaccenderlo. Durante la ricarica,
l’apparecchio e l’adattatore potrebbero scaldarsi
un po’. È del tutto normale.
• Scollegare la spina dell’adattatore dalla
presa di corrente, scollegare il connettore dal
tagliacapelli tenendo saldamente il connettore,
senza tirare il cavo di alimentazione, onde evitare
di danneggiare l’adattatore.
• Non lasciare in carica l’apparecchio per più di 6
ore consecutive.
8. Pulizia e manutenzione della testina
Pulire la testina
per rimuovere
i capelli rimasti
al suo interno.
Mettere una
goccia di olio
in ciascuno
dei punti
indicati.

Manuale d’istruzioni HSM1101 PROFESSIONAL BARBER
dcg16.it
7
10.Riferimentidettagliatiperhairstyle
11.Attenzione!
• Non scollegare la spina dell’adattatore dalla presa di corrente con le mani bagnate.
Pericolo di scossa elettrica.
• Al termine della ricarica, scollegare la spina dell’adattatore dalla presa di corrente,
scollegare il connettore dal tagliacapelli tenendo saldamente il connettore, senza
tirare il cavo di alimentazione, onde evitare di danneggiare l’adattatore.
• Non lasciare in carica l’apparecchio per più di 6 ore consecutive, onde evitare che
la vita operativa della batteria si riduca.

Instruction manual HSM1101 PROFESSIONAL BARBER
dcg16.it
8
1. Precautions
❑ Please read these instructions carefully before use.
❑ Keep present instructions for future references.
❑ Check that your mains voltage corresponds to that stated on the appliance.
❑ Only use the appliance for domestic purposes and household or similar applications such as:
- staff kitchen areas, in shops, offices and other working environments;
- By clients in hotels, motels and other residential type environments;
- Environment type like : • Farm Houses • Bed and Breakfast.
❑ Only use the appliance in the way indicated in these instructions.
❑ Inform potential users of these instructions.
❑ Never leave the appliance unsupervised when in use.
❑ The appliance must be used only for its intended purpose. No responsibility can be taken for
any possible damage caused by incorrect use or improper handling.
❑ Children and persons with disabilities are not always aware of the danger posed by the use of
appliances.
❑ This device can be used by children aged 8 years and older and adults, with reduced physical,
sensory or mental capabilities or lack of experience and knowledge, if they have been given
supervision or instruction concerning use of the appliance in a safe way and understand the
hazards involved.
❑ Cleaning and user maintenance shall not be made by children without supervision.
❑ This device is not a toy, do not leave small children or people with disabilities to play with.
❑ In order to ensure your children‘s safety, please keep all packaging (plastic bags, boxes,
polystyrene etc.) out of their reach.
❑ Caution ! Do not allow small children to play with the foil :
THERE IS A DANGER OF SUFFOCATION !
❑ Never immerse the appliance in water or any other liquid for any reason whatsoever.
❑ Never place it into the dishwasher.
❑ Never use the appliance near hot surfaces.
❑ Never use the appliance outside and always place it in a dry environment.
❑ Never use accessories, which are not recommended by the producer. They could constitute
a danger to the user and risk to damage the appliance.
❑ Make sure the appliance has cooled down before cleaning and storing it.
❑ This appliance is not intended to be operated by means of an external timer or separate
remote-control system.

Instruction manual HSM1101 PROFESSIONAL BARBER
dcg16.it
9
1. Precautions
❑ Please read these instructions carefully before use.
❑ Keep present instructions for future references.
❑ Check that your mains voltage corresponds to that stated on the appliance.
❑ Only use the appliance for domestic purposes and household or similar applications such as:
- staff kitchen areas, in shops, offices and other working environments;
- By clients in hotels, motels and other residential type environments;
- Environment type like : • Farm Houses • Bed and Breakfast.
❑ Only use the appliance in the way indicated in these instructions.
❑ Inform potential users of these instructions.
❑ Never leave the appliance unsupervised when in use.
❑ The appliance must be used only for its intended purpose. No responsibility can be taken for
any possible damage caused by incorrect use or improper handling.
❑ Children and persons with disabilities are not always aware of the danger posed by the use of
appliances.
❑ This device can be used by children aged 8 years and older and adults, with reduced physical,
sensory or mental capabilities or lack of experience and knowledge, if they have been given
supervision or instruction concerning use of the appliance in a safe way and understand the
hazards involved.
❑ Cleaning and user maintenance shall not be made by children without supervision.
❑ This device is not a toy, do not leave small children or people with disabilities to play with.
❑ In order to ensure your children‘s safety, please keep all packaging (plastic bags, boxes,
polystyrene etc.) out of their reach.
❑ Caution ! Do not allow small children to play with the foil :
THERE IS A DANGER OF SUFFOCATION !
❑ Never immerse the appliance in water or any other liquid for any reason whatsoever.
❑ Never place it into the dishwasher.
❑ Never use the appliance near hot surfaces.
❑ Never use the appliance outside and always place it in a dry environment.
❑ Never use accessories, which are not recommended by the producer. They could constitute
a danger to the user and risk to damage the appliance.
❑ Make sure the appliance has cooled down before cleaning and storing it.
❑ This appliance is not intended to be operated by means of an external timer or separate
remote-control system.
Always place the unit on a flat surface. Ensure, also, not to cover the device and not to put
anything on it.
❑ Incorrect operation and improper use can damage the appliance and cause injury to the user.
❑ This device, designed for home use, complies with standards relating to this type of product.
❑ The item is not to be used, if it has been dropped or if there are visible signs of damage.
❑ This appliance is only intended for household use.
❑ Regarding the instructions for cleaning, thanks to refer to the below paragraph of the
manual.
❑ This appliance is only intended for household use.
2. Specifications
Lithium Rechargeable Battery Rated Voltage :3.7V
Charging time: approx. 120 minutes
Running time: approx. 120 minutes
Capacity: 1400mAh
Adaptor
Input:100-240V 50/60Hz
Output: DC 5.0V 1A
Power:3W
3. Notices
Add the oil into the cutter head before use. (Check the left
picture for reference) The product body may be a little hot when
using or charging. But it will not affect its performance.
Positions to add oil (one drip to each of the 3 positions)
⚫ Add the oil to the positions as directed by circle.
⚫ Don’t use petrol, alcohol, thinner to clean the product. Otherwise, the product color
may be changed then.
⚫ Use diluted soap water to clean the product.
⚫ Do not charge the product if the room temperature is higher than 40 or lower than 0.
⚫ Keep it out of the reach of children to avoid cutting by clipper blade or swallowing its
small parts.

Instruction manual HSM1101 PROFESSIONAL BARBER
dcg16.it
10
Always place the unit on a flat surface. Ensure, also, not to cover the device and not to put
anything on it.
❑ Incorrect operation and improper use can damage the appliance and cause injury to the user.
❑ This device, designed for home use, complies with standards relating to this type of product.
❑ The item is not to be used, if it has been dropped or if there are visible signs of damage.
❑ This appliance is only intended for household use.
❑ Regarding the instructions for cleaning, thanks to refer to the below paragraph of the
manual.
❑ This appliance is only intended for household use.
2. Specifications
Lithium Rechargeable Battery
Rated Voltage :3.7V
Charging time: approx. 120 minutes
Running time: approx. 120 minutes
Capacity: 1400mAh
Adaptor
Input:100-240V 50/60Hz
Output: DC 5.0V 1A
Power:3W
3. Notices
Add the oil into the cutter head before use. (Check the left
picture for reference) The product body may be a little hot when
using or charging. But it will not affect its performance.
Positions to add oil (one drip to each of the 3 positions)
⚫ Add the oil to the positions as directed by circle.
⚫ Don’t use petrol, alcohol, thinner to clean the product. Otherwise, the product color
may be changed then.
⚫ Use diluted soap water to clean the product.
⚫ Do not charge the product if the room temperature is higher than 40 or lower than 0.
⚫ Keep it out of the reach of children to avoid cutting by clipper blade or swallowing its
small parts.

Instruction manual HSM1101 PROFESSIONAL BARBER
dcg16.it
11
4. Parts name
Notes:
⚫ The product can be cord or cordless using.
⚫ The yellow Turbo icon will be shown in LED display if the product is switched to speed II.
⚫ The white numbers (from 1 to 99) in LED display means the battery left capacity in
percentage.
4. Parts name
Notes:
⚫ The product can be cord or cordless using.
⚫ The yellow Turbo icon will be shown in LED display if the product is switched to speed II.
⚫ The white numbers (from 1 to 99) in LED display means the battery left capacity in
percentage.
4. Parts name
Notes:
⚫ The product can be cord or cordless using.
⚫ The yellow Turbo icon will be shown in LED display if the product is switched to speed II.
⚫ The white numbers (from 1 to 99) in LED display means the battery left capacity in
percentage.

Instruction manual HSM1101 PROFESSIONAL BARBER
dcg16.it
12
5. Cutting Size adjustment
6. Charging Method
⚫ Put the adaptor connector terminal into the base.
⚫ Make sure the product is in the position of Power Off and
then put it into charging base. The display will show a fixed
red plug icon and the left power percentage. As soon as it is
fully charged, the display will show number 99 together with
fixed red plug icon. And only fixed red plug icon will be shown
after 3 minutes of finished charging.
⚫ Charging time is around 2 hours.
⚫ The red plug icon in display will be flashing if the left power is less than 15%.
⚫ If using charging base, please connect the adaptor with the base and then plug into the
socket. And then put the product into the base to start the charging.
7. Charging Notices
⚫ Notes: If the product not being used for a long time, please ensure the
battery be charged at least one time within 3 months to avoid damage.
Plug-and-play function means that you can use the product while charging in
case of insufficient power.
⚫ Put the adaptor connector terminal into the port of the product and then
plug into a socket. Switch on the product and then use it.
⚫ After using, switch off and then disconnect the adaptor connector with
product.
Choose the suitable
comb size as you need
Match it with the
blade at the same
level and aseemble.
Take it out as
picture.

Instruction manual HSM1101 PROFESSIONAL BARBER
dcg16.it
13
5. Cutting Size adjustment
6. Charging Method
⚫ Put the adaptor connector terminal into the base.
⚫ Make sure the product is in the position of Power Off and
then put it into charging base. The display will show a fixed
red plug icon and the left power percentage. As soon as it is
fully charged, the display will show number 99 together with
fixed red plug icon. And only fixed red plug icon will be shown
after 3 minutes of finished charging.
⚫ Charging time is around 2 hours.
⚫ The red plug icon in display will be flashing if the left power is less than 15%.
⚫ If using charging base, please connect the adaptor with the base and then plug into the
socket. And then put the product into the base to start the charging.
7. Charging Notices
⚫ Notes: If the product not being used for a long time, please ensure the
battery be charged at least one time within 3 months to avoid damage.
Plug-and-play function means that you can use the product while charging in
case of insufficient power.
⚫ Put the adaptor connector terminal into the port of the product and then
plug into a socket. Switch on the product and then use it.
⚫ After using, switch off and then disconnect the adaptor connector with
product.
Choose the suitable
comb size as you need
Match it with the
blade at the same
level and aseemble.
Take it out as
picture.
⚫ If the battery has been used out, it may be difficult to start
the product even if it is plugged. You should restart it after
charging at least one or two minutes. while charging, the
product body and the adaptor may be a little hot, however, it
is a normal phenomenon.
⚫ Take the adaptor out from the power socket
Take the plug out from the product
Please hold the plug and take it out.
Don’t pull the cord in order to avoid any damage for adaptor.
⚫ Don’t charge the product more than 6 hours each time.
8. Cutting Head Cleaning & Maintaince
9. Repairing Service
⚫ From the date of purchase, you can get one year warranty if our appointed repairman
confirms that the problems or the defects are cause by production process or material.
（Except for the changes of blade.）
⚫ This free service doesn’t include the attachment, auxiliary device, transportation charge,
and door-to-door service charge.
⚫ It can only be valid as the date of purchase both in warranty card and purchase voucher
are matched.
⚫ Warranty card and invoice or other purchase voucher should be provided when
repairing.
⚫ The warranty card only can be used in American mainland.
⚫ The warranty card is the evidence of free repairing within specified conditions and
period. But it doesn’t limit the rights of consumers in law.
⚫ Please keep the warranty card well after purchase.
Free repairing service can’t be provided under the following conditions:
⚫ The damage was caused by the repair or reconstruct in the place which isn’t appointed
by our company.
⚫ The damage was caused by incorrect use, dropping, or accidents.
Clean the left hairs in cutting head
Put a drip of oil to each circles
As soon as the charging is finished,
take the plug out from the socket.

Instruction manual HSM1101 PROFESSIONAL BARBER
dcg16.it
14
⚫ If the battery has been used out, it may be difficult to start
the product even if it is plugged. You should restart it after
charging at least one or two minutes. while charging, the
product body and the adaptor may be a little hot, however, it
is a normal phenomenon.
⚫ Take the adaptor out from the power socket
Take the plug out from the product
Please hold the plug and take it out.
Don’t pull the cord in order to avoid any damage for adaptor.
⚫ Don’t charge the product more than 6 hours each time.
8. Cutting Head Cleaning & Maintaince
9. Repairing Service
⚫ From the date of purchase, you can get one year warranty if our appointed repairman
confirms that the problems or the defects are cause by production process or material.
（Except for the changes of blade.）
⚫ This free service doesn’t include the attachment, auxiliary device, transportation charge,
and door-to-door service charge.
⚫ It can only be valid as the date of purchase both in warranty card and purchase voucher
are matched.
⚫ Warranty card and invoice or other purchase voucher should be provided when
repairing.
⚫ The warranty card only can be used in American mainland.
⚫ The warranty card is the evidence of free repairing within specified conditions and
period. But it doesn’t limit the rights of consumers in law.
⚫ Please keep the warranty card well after purchase.
Free repairing service can’t be provided under the following conditions:
⚫ The damage was caused by the repair or reconstruct in the place which isn’t appointed
by our company.
⚫ The damage was caused by incorrect use, dropping, or accidents.
Clean the left hairs in cutting head
Put a drip of oil to each circles
As soon as the charging is finished,
take the plug out from the socket.
⚫ The damage was caused by natural disaster or abnormal voltage.
⚫ The damage was caused by industrial use, commercial use, or some other uses which
are out of the ranges mentioned in instruction manual.
10. Detailed Trimming Hairstyle Reference
11. Warning!
⚫ Don’t take the adaptor out from the socket by wet hands to avoid the risk of electric
shock.
⚫ As soon as the charging is finished.
⚫ Take the adaptor out from the power socket.
⚫ Take the plug out from the product.
⚫ Please hold the plug and take it out. Don’t pull the cord in order to avoid any damage
for the adaptor.
⚫ Don’t charge the product more than 6 hours each time.
⚫ Otherwise, the life time of battery will be reduced.

Instruction manual HSM1101 PROFESSIONAL BARBER
dcg16.it
15
⚫ The damage was caused by natural disaster or abnormal voltage.
⚫ The damage was caused by industrial use, commercial use, or some other uses which
are out of the ranges mentioned in instruction manual.
10. Detailed Trimming Hairstyle Reference
11. Warning!
⚫ Don’t take the adaptor out from the socket by wet hands to avoid the risk of electric
shock.
⚫ As soon as the charging is finished.
⚫ Take the adaptor out from the power socket.
⚫ Take the plug out from the product.
⚫ Please hold the plug and take it out. Don’t pull the cord in order to avoid any damage
for the adaptor.
⚫ Don’t charge the product more than 6 hours each time.
⚫ Otherwise, the life time of battery will be reduced.
⚫ The damage was caused by natural disaster or abnormal voltage.
⚫ The damage was caused by industrial use, commercial use, or some other uses which
are out of the ranges mentioned in instruction manual.
10. Detailed Trimming Hairstyle Reference
11. Warning!
⚫ Don’t take the adaptor out from the socket by wet hands to avoid the risk of electric
shock.
⚫ As soon as the charging is finished.
⚫ Take the adaptor out from the power socket.
⚫ Take the plug out from the product.
⚫ Please hold the plug and take it out. Don’t pull the cord in order to avoid any damage
for the adaptor.
⚫ Don’t charge the product more than 6 hours each time.
⚫ Otherwise, the life time of battery will be reduced.

Instruction manual HSM1101 PROFESSIONAL BARBER
dcg16.it
16
⚫ The damage was caused by natural disaster or abnormal voltage.
⚫ The damage was caused by industrial use, commercial use, or some other uses which
are out of the ranges mentioned in instruction manual.
10. Detailed Trimming Hairstyle Reference
11. Warning!
⚫ Don’t take the adaptor out from the socket by wet hands to avoid the risk of electric
shock.
⚫ As soon as the charging is finished.
⚫ Take the adaptor out from the power socket.
⚫ Take the plug out from the product.
⚫ Please hold the plug and take it out. Don’t pull the cord in order to avoid any damage
for the adaptor.
⚫ Don’t charge the product more than 6 hours each time.
⚫ Otherwise, the life time of battery will be reduced.

Manuale d’istruzioni HSM2900 PROFESSIONAL BARBER
dcg16.it
17
INFORMAZIONI AGLI UTENTI
ai sensi del Decreto Legislativo N° 49 del 14 Marzo 2014
“Attuazione della Direttiva 2012/19/UE sui riuti di apparecchiature
elettriche ed elettroniche (RAEE)”
Il simbolo del cassonetto barrato riportato sull’apparecchiatura indi-
ca che il prodotto alla ne della propria vita utile deve essere raccol-
to separatamente dagli altri riuti. L’utente dovrà, pertanto, conferire
l’apparecchiatura integra dei componenti essenziali giunta a ne vita
agli idonei centri di raccolta differenziati a seconda dei riuti elet-
tronici ed elettrotecnici, oppure riconsegnarla al rivenditore al mo-
mento dell’acquisto di nuova apparecchiatura di tipo equivalente, in
ragione di uno a uno, oppure 1 a zero per le apparecchiature aventi
lato maggiore inferiore a 25 cm. L’adeguata raccolta differenziata
per l’invio successivo dell’apparecchiatura dismessa al riciclaggio, al
trattamento e allo smaltimento ambientale compatibile contribuisce
ad evitare possibili effetti negativi sull’ambiente e sulla salute e fa-
vorisce il riciclo dei materiali di cui è composta l’apparecchiatura.
Lo smaltimento abusivo del prodotto da parte dell’utente comporta
l’applicazione delle sanzioni amministrative di cui al Decreto Legisla-
tivo N ° 49 del 14 Marzo 2014.

Manuale d’istruzioni HSM1101 PROFESSIONAL BARBER
dcg16.it
18
GARANZIA
Per l’apparecchio da noi messo in commercio ci assumiamo una ga-
ranzia di 24 mesi dalla data di acquisto (scontrino) solo per la parte
motore. Per la garanzia è sufciente lo scontrino di acquisto. Senza
questo non sussiste il diritto né ad una sostituzione né ad una ripa-
razione gratuita.
Nel caso si ricorra alla garanzia, restituire al rivenditore l’apparecchio
completo in ogni sua parte, nell’imballaggio originale unitamente
allo scontrino.
La riparazione e/o la sostituzione di pezzi soggetti a logoramento
(*), come anche operazioni di pulizia e manutenzione non rientrano
nella garanzia e quindi sono a pagamento! La garanzia perde la sua
validità se l’apparecchio è sottomesso all’intervento di terzi.
(*): cursori, ganci impastatori, cinghie di trasmissione, telecomandi di
ricambio, spazzolini di ricambio, lame di seghe, manopole, guarni-
zioni, timer, ltri ecc.
DOPO LA GARANZIA
Quando la garanzia è scaduta, le riparazioni devono essere effettuate da
un negozio od un servizio specializzato, contro pagamento.

Manuale d’istruzioni HSM1101 PROFESSIONAL BARBER
dcg16.it
19
DCG SRL
Via G. Garibaldi 68 - 20861 Brugherio (MB)
MADE IN CHINA