DCS BGB48-BQAR User manual

36 Summer 2008
outdoorgrill
The ultimate in outdoor cooking. This fully featured grill delivers professional performance and
delicious results. Precision ported, U-shaped 304 grade stainless steel burners rated at
25,000 BTU’s per burner offer powerful performance and control. The patented Smart Beam®grill
light perfects grilling at night with a 50-watt halogen light integrated into the patented rotisserie
motor that is capable of illuminating the entire grilling surface. Our patented Grease Management
System®reduces flare-ups by effectively channeling oil and grease away from the flame while
grilling. A 9-volt Battery Ignition ensures safe and efficient grill lighting every time and Double-
Sided Cast 304 Grade Stainless Steel Grilling Grates feature one side with a gentle radius for
support and handling while the other side is W-shaped for maximum grease capture while leaving
perfect sear lines. Ceramic Radiant Technology provides intense, even heat. The Dedicated Infrared
Rotisserie Burner supplies controllable searing heat. The heavy-duty Rotisserie Motor with
Stainless Steel Rod and Forks can accommodate up to 50 pounds. Patented design features of the
grill are complemented by the DCS original styled cart with robust side shelf supports, drop-in
serving trays, and large storage drawers.
BGB48-BQAR 48” Grill with Rotisserie and optional cart
BGB48-BQR 48” Grill with Rotisserie and Integrated Sealed Side Burners (as shown)
ADDITIONAL FEATURES:
• Smoker tray with dedicated 3,500-BTU burner
•Removable stainless steel warming rack
•Optional integrated sealed side burners
•Available for built-in or on cart applications
• Designer metal control knobs
•Removable stainless steel drip tray
48” Professional Grill
magalog summer 2008.2.qxd 4/24/08 2:00 PM Page 36

Summer 2008 37
48” Grill Dimensions (with optional grill cart)
IGNITION
48” Grill Dimensions (with optional grill cart)
IGNITION
48” Grill Island Preparation
Grill Models: BGB48-BQAR/BGB48-BQR
Ordering Data:
Please specify gas type (natural or propane) when ordering
Gas Requirements:
Natural
•1/2" NPT male with a 3/8" flareadapter
•Operational Pressure: 4” W.C.
•Supply Pressure: 6" to 9” W.C.
Propane
•1/2" NPT male with a 3/8" flareadapter
•LP hose with a quick disconnect & fitting are shipped
connected
•Operational Pressure: 10” W.C.
•Supply Pressure: 11" to 14” W.C.
Power Requirements:
• 120V 60Hz for models with Rotisserie Motor
.
Island Ventilation Requirements:
It is recommended that adequate ventilation holes must be
provided in the base of an enclosurein the event of a gas leak.
Grill Placement:
DO NOT build grill under overhead unprotected combustible
construction. Use only in well-ventilated areas. These units are
for outdoor use only. If located in a consistently windy area
(oceanfront, mountaintop, etc.) a wind break will be required.
Conversion Kits:
NG to LP and LP to NG conversion kits are available from your
dealer.
Accessories
•Stainless Steel Grill Cart(CAD-48)
•Single or double side burners for built-in application
•Stainless Steel Access Doors for built-in application
•Stainless Steel Access Drawers for built-in application
•Insulated Jacket for built-in application
•Grilling Tool Set
•Brazilian CherryChopping Boardthat fits in cartside-shelf
•Drop-on Griddle Plate
• Vinyl Grill Cover
• Wok and Wok Ring for use on side burners
Grill Model: BGB48-BQAR
Cart Model: CAD-48
Grill Model: BGB48-BQR
Cart Model: CAD-48
Weencourage you to find out more about these features and learn how they
can make your cooking experience moreenjoyable by visiting our learning
page at: www.dcsappliances.com.
Because of continuing product improvement these specifications aresubject
to change without notice.
MODEL NUMBER BGB48-BQAR BGB48-BQR
TOTAL COOKING AREA 1167 SQ. INCHES 1123 SQ. INCHES
PRIMARY COOKING AREA (GRILL AREA) 840 SQ. INCHES 638 SQ. INCHES
SECONDARYCOOKING AREA (WARMING RACK) 327 SQ. INCHES 241 SQ. INCHES
TWO SIDE BURNERS 244 SQ. INCHES
GRILL BURNERS 4 @ 25,000 BTU/HR 3 @ 25,000 BTU/HR
INTEGRATED SIDE BURNERS 2 @17,000 BTU/HR
INTEGRATED ROTISSERIE BURNER 18,000 BTU/HR 14,000 BTU/HR
SMOKER BURNER 3,500 BTU/HR 3,500 BTU/HR
DOUBLE-SIDED GRILL GRATES 304 GRADE STAINLESS STEEL 304 GRADE STAINLESS STEEL
GREASE MANAGEMENT SYSTEM®✔✔
SHIPPING WEIGHT (GRILL HEAD) 365 LBS. 345 LBS
SHIPPING WEIGHT (OPTIONAL CART) 190 LBS. 190 LBS.
SHIPPING DIMENSIONS (HEIGHT X WIDTH X DEPTH) 32” X 52” X 31-1/2” 32” X 52” X 31-1/2”
access doors
(ADN20x48)
access drawer
(ADR 48)
Vent
#
Max.
4” x 4” opening for
gas supply line
Note: Locate electrical
service on the right hand
side for rotisserie motor
connection.
3” to non-combustible
construction/min. for lid
clearance
12” min. combustible
construction
*Standard cut-out dimensions for non-combustible enclosure
** Insulated jacket cut-out dimensions for combustible enclosure
#Island installation to use minimum of 3 vents providing
10 square inches per vent (typical)
BGB48-BQR
BGB48-BQAR
Vent #
Vent #
magalog summer 2008.2.qxd 4/24/08 2:02 PM Page 37