De STIJL INNOCENT Series User manual

INNOCENT Series sleep systems: Thema / Nova / Linea– installationinstructions
Includes8packs, containing:
Pack1:1xHeadboard parts
Pack2:1xFrame parts
Pack3-4: 1xAdjustable base, 1xMattress stopper
Pack3-4: 1xAdjustable base, 1xMattress stopper
Pack5-6: 1xMotor
Pack5-6: 1xMotor
Pack7-8: 1xMattress
Pack7-8: 1xMattress
1) Assemble the frame as per the frame installationinstructions overleaf!
2) Take the adjustable slattedbases out of their packing.
VERY IMPORTANT!!!! – CUT THE TIESAT TOP AND BOTTOM OF BASES.
The tricolour stickerindicates thehead side.
Put bases onthefloor, slatsdown,shafts andmotor hooks up.
3) Take the motors outof theirbox.Connect the 9Vbackupbatteries (included).
Remove theplastic covers off the shaftholes onthe motors as the arrows point,
use your handonly, notools are needed.
Place the motors on the shafts of the basesabove the hooks.
The hooks shouldbe completelycoveredbythe motors!
Mind that thehead &feet labelsof the motor are inthe right directions:
Head-uplabel – side ofthe tricolour sticker(head)
Feet-uplabel – side withno tricoloursticker (feet)
Afterplacingthe motors, return theirplasticcoversbackinplace with your handandensure thatthe motors
sitfirmlywithoutmoving.
4) Place bases insidethe bed, as close as possible to the feetside of the frame.
Mind that the headpart(with thetricoloursticker)is attheheadend.
5) Plugin, andcheckthe movement ofthe motorisedbases whileinside the bedframe all the wayupand
backto flat.
6) Attach mattress stoppers (cameinsame packingasthe bases)tothefeet endof the adjustablebase (tothe
movingpart).
7) Place the mattresses.
Please consult Ari fromDeSTIJLon anyquestion ordoubt:0417675666

INNOCENT SERIES frames:THEMA /NOVA/LINEA Installation Instructions
1) Attach brackets to the frame sides by screwing
them onthe markedareas.
Then attach headboard to thebrackets withbolts.
2) Attach legs to the middlebeam, andfastenthe
boltwith nut.
If fabriccovers the holes from theother side,
please makeasmallincision - to get the bolt
through. J
Attach endcorners to the middlebeam,from both
sides.
3) Attach middle beam to the headboardandto
the feetside of the frame with bolts.
4) Attach brackets to the framesides byscrewing
them onthe markedareas.
Then attach feetside to the brackets withbolts.