Deaf bonce Machete liter ml-10r d2 User manual

САБВУФЕРSUBWOOFERРУКОВОДСТВО ПОЛЬЗОВАТЕЛЯhttps://alphard.audioML-10R D2/D4ML-12R D2/D4

The correct choice of the ampliﬁer, its settings and enclosure design prolongs the lifetime of your subwoofer. You should select an ampliﬁer with a nominal power below the nominal power of the subwoofer. Proper coordination of the head unit (HU) with the ampliﬁer will provide clean, undistorted signal fed to the subwoofer, which prevents overheating and voice coil damage. Like any other speaker the subwoofer has moving and stationary parts. We strongly recommend that the moving parts of the subwoofer should be warmed up at the beginning of operation. Be extra careful when warming up the parts. Warm up the subwoofer using musical material for 40 hours at medium power. If you feel strange smell during operation at maximum volume, you should lower the volume of the subwoofer and let the device to cool down at a low volume.Recommended settings of the ampliﬁer and HU: Volume of HU should not exceed 80%. The ampliﬁer sensitivity should be set to 50%, subsonic ﬁlter frequency (Subsonic) should be set to 5 Hz below the port settings. For example, if you conﬁgure the port at 30 Hz, Subsonic should be set to 25 Hz. The low pass ﬁlter LPF (the ﬁlter that cuts all frequencies above those set for the ﬁlter) should be set to 63-80 Hz, bassboost should be set to 0.Port setting, HzML-10R D2/D4ML-12R D2/D440 / 1.480 / 12.435 / 13.83750 / 1.8150 / 2362 / 24.435Model

ML-10R D2/D42+2 / 4+41240 / 40.613.5 / 14.20.48 / 0.4917.5 / 17.81.8+1.8 / 3.6+3.686 / 86.2 ML-12R D2/D42+2 / 4+41238 / 38.342 / 43.10.46 / 0.4716.6 / 16.91.8+1.8 / 3.6+3.688 / 88.210FoamPressed paperFerrite50010002CopperStamped steel12FoamPressed paperFerrite50010002CopperStamped steel

ML-10R D2/D4ML-12R D2/D4

Ø 246 mm / 9.69"

Ø 298 mm / 11.73"

Ø 232 mm / 9.13"

124.8 mm / 4.91"148.3 mm / 5.87"

Ø 278 mm / 10.94"

160.4 mm / 6.31"136.6 mm / 5.38"

ML-10R D2/D4ML-12R D2/D4

Настройка порта, ГцML-10R D2/D4ML-12R D2/D440 / 1,480 / 12,435 / 13,83750 / 1,8150 / 2362 / 24,435Модель

ML-10R D2/D4ML-12R D2/D42+2 / 4+41240 / 40,613,5 / 14,20,48 / 0,4917,5 / 17,81,8+1,8 / 3,6+3,686 / 86,2 2+2 / 4+41238 / 38,342 / 43,10,46 / 0,4716,6 / 16,91,8+1,8 / 3,6+3,688 / 88,210ПенополиуретанПресс. целлюлозаФеррит50010002МедьШтампованная сталь12ПенополиуретанПресс. целлюлозаФеррит50010002МедьШтампованная сталь