Decor Star PL-020-SS User manual

Decor Star PL-020-SS Rev. A4 0920161
Decor Star PL-020-SS
Features
- Stunning stylish European inspired design
- Fingerprint resistance nish
- Durable stainless steel frame construction
- Contemporary brass hand shower
- 4 stage shower functions (Rainfall, Waterfall, Massage Spray, Hand Shower)
- 50 rainfall nozzles
- 100 horizontal spray massage nozzles

Decor Star PL-020-SS Rev. A4 0920162
Thank you for purchasing Decor Star products. Please read the information below and keep this
installation guide for future reference. If you require assistance, please contact our customer service
department at 1-800-879-1197, Monday - Friday 9AM - 5PM Paci c Time. Or by email at
[email protected].
Limited Two (2) Year Warranty (For USA Only)
The manufacturer warrants this product to be free of manufacture defects during daily normal
household use for as long as it is owned by the original purchaser of this product. Please keep a
copy of the original invoice as proof of purchase.
Should a malfunction occur within the warranty period, Décor Star USA will, as its option, (1)
repair or replace the defective part(s) or product(s) at no charge; (2) issue a refund of the original
purchase price of the product(s) (Valid within 30 days from the date of purchase); or (3) issue a
credit to be applied toward the purchase of a new Décor Star product. Shipping/delivery charges
may apply and are in Décor Star USA’s sole discretion.
This limited warranty shall not apply to goods which have been subject to accident, negligence,
improper installation, product abuse, product misuse, or use of cleaners containing abrasives, alcohol
or other organic solvents, whether performed by a contractor, service company, or yourself, are
excluded from this warranty.
Our responsibility under this limited warranty is limited to only to replacement parts and no other
costs. Décor Star USA will not be responsible for labor charges and/or damage incurred by
installation, repair or replacement, nor for any indirect incidental or consequential damages, losses,
injury or costs of any nature relating to this product. Except as provided by law, this limited warranty
is in lieu of and excludes all other warranties, conditions, and guarantees, whether expressed or
implied, statutory or otherwise, including without restriction those merchantability of  tness for use.
This limited warranty is non-transferable. This limited warranty only applies to products purchased
and installed in the United States. This limited warranty covers the original consumer purchase only
and does not include business, commercial or industrial use of this product. To obtain service under
the Limited Warranty, please contact Decor Star USA at [email protected]. The Decor Star
USA Customer Care Department will determine whether to repair or replace your product, issue a
refund, or issue a credit.

Decor Star PL-020-SS Rev. A4 0920163
Attention
• This installation guide is subject to change without notice, please contact us to request the most
updated version of this installation guide.
• This is a general installation guideline, actual installation may vary. Consult a professional if
necessary.
• Product drawings in this installation guide is for illustration purpose only. Actual product may vary
depends on model.
• Always take extra precautions and wear appropriate safety equipment when installing this product.
• Proper water pressure needs to be maintained to prevent possible scalding.
• Stainless steel shower panels are handmade and assembled. Product dimensions may vary
slightly, always measure the actual product before installation.
You may also need the following tools
1. Thread Sealant Tape, (PTFE Tape) 5. Pencil or Marker
2. Silicon Sealant 6. Level
3. Phillips Screw Driver 7. Hammer
4. Drill with ¼” Drill bit
Before You Begin
• Read and understand this instructions completely before installation.
• Unpack and inspect the shower panel from the package for shipping damage and make sure all
parts are included with the shower panel.
• Keep the product in its package until you are ready to install.
• Make sure the installation site is clean and free of dust and debris.
• Please make sure the water supply is shut o󰀨 to the installation area. If necessary, shut o󰀨 the
water to the entire house.
• Turn on the water at a bathroom faucet in the house to relieve the pressure in the plumbing
system.
Rough-In
• Please follow all local building and plumbing codes.
• The height and placement of the shut o󰀨 valves will be based on the installation height of
the shower panel, see  gure A. The installation height is approximately the total distance of
measurement A and measurement B.
• The  nished wall opening for the valves should not be larger than 4.5” wide by 6” tall. Make sure
the opening is completely waterproof to prevent any water leaking into the wall space. (NOTE:
Product warranty does not cover any damages caused by water leak due to negligent and
improper installation of the shut o󰀨 valves and the shower panel.)
• An outlet box such as the Sioux Chief Ox BoxTM 696-G2001MF, 696-G2303MF, or 696-2403MF is
recommended to expedite the installation process of the shut o󰀨 valves. (NOTE: additional parts
such as brass reducer / adapters are required but not included with this product)

Decor Star PL-020-SS Rev. A4 0920164
Recommended
10” - 12”
Approximate shower inlet
valve location
approx. outlet
box location
(This is the distance from
the oor to the bottom
edge of the shower panel)
Reference Model Height is 5’8”
* Shower panel drawing on this page is for
illustration purpose only. Actual product may
vary depends on model.
Fig. A
(This is the distance from
the bottom edge of the
shower panel to the
shower panel inlet valve.
NOTE: This distance vary
by models, always take the
actual measurement from
the shower panel)
A
B
The installation height of the outlet box
is approximately the total distance of
measurement A and measurement B.
It is recommened to aim the top hori-
zontal body jets at the chest area of the
user for optimal showering experience.

Decor Star PL-020-SS Rev. A4 0920165
Technical / Flow Rate Data
Compliance with the following code(s) and standard(s):
Uniform Plumbing Code (UPC®)
National Plumbing Code of Canada
IGC 154-2013 and ASME A112.18.1-2012/CSA B125.1-12
Recommended Operating Pressure: 50 - 80 psi
Approx. ow rate: 2.3 gpm at 80 psi
508mm
20”
1.625”
1,210mm
47.25”
500mm
19.69”
70mm
2.76”
700mm
27.56””
440mm
17.32””
225mm
8.86””
*All Measurements are Approximate
200mm
7.875”

Decor Star PL-020-SS Rev. A4 0920166
Parts List
19
1
2
3
4
5
6
7
8
10
11
9
13
14
15
16
18
17
12
01. Top Cover
02. Top Panel
03. Panel Body
04. Hand shower
05. Gasket
06. Locking Nut
07. Hand Shower Connector
08. Hand Shower Cradle
09. Hand Shower Hose
10. Water Supply Hoses
11. Hand Shower Hose
11. Valve
12. Bolts
13. Locking Nuts
14. Waterfall Assembly
15. Rainfall Shower Assembly
16. Top Cover Screws
17. Screws x 4
18. Mounting Brackets x 2
19. Wall Anchors x 4

Decor Star PL-020-SS Rev. A4 0920167
Installation
1. Remove top cover. Attach the top panel
to the main body with the supplied screws.
Run the water supply hoses through the
hole on the top panel.
2. Trim o󰀨 excess water supply hoses and
attach to the spray head unit according to
the hose labels and close the top cover.
3. Mark the positions of the 2 brackets on
the wall and set a side the panel. (NOTE:
The distance between the two brackets
should be 700mm or 27.56”)
700mm
27.56”

Decor Star PL-020-SS Rev. A4 0920168
Installation (cont.)
6. Apply thread sealant tape to the thread-
ing on the shut o󰀨 valves before connect
both hot and cold water supply hoses to the
valves. Turn on the valves and check all
connections for possible leaks.
4. Using a drill with a tile bit, drill the hole
slowly into the tile. Do not drill into any pip-
ing or wiring in the wall. Insert the anchors
into the wall. (NOTE: Before installing the
wall anchors, use a small piece of painters
tape or masking tape over the drill area.
This will prevent damages to the tile)
1”
5. Secure the mounting brackets to the
wall.

Decor Star PL-020-SS Rev. A4 0920169
Installation (cont.)
7. Hang the unit on the wall to complete the
installation. Make sure the unit is seated
properly. Apply silicon sealant on left and
right sides of the shower panel. (NOTE: do
not seal the bottom of the panel, this will
allow any possible future leaks to drain out
the panel)
8. Connect hand shower hose to the main
panel body. Attach the hand shower to the
hose. (NOTE: Install the rubber washer to
prevent leak.)
9. Place the hand shower cradle at desired
location (preferably on the left side of the
panel) and follow step 4 when drilling and
mounting the cradle.

Decor Star PL-020-SS Rev. A4 09201610
1. Turn the temperature control knob to set the desired water
temperature. The control is preset to maximum temperature
of 100.3 degrees Fahrenheit. To set higher water tempera-
ture, push down the safety pin and turn the dial counter-
clockwise to the desired temperature mark. (Important:
Scalding may occur if bypass the safety pin, use this
control with caution)
2. Select the desired water function by turning the selector to
the corresponding marking.
Operation
Water Functions
Overhead Jets
Overhead Waterfall
Horizontal Body Jets
Handheld Shower
Maintenance Guide
Please follow the cleaning material manufacturer’s instructions. In addition, pay attention to the
following points:
1. Regular cleaning can prevent mineral build up on shower head and handheld shower.
2. Use a mild detergent such as liquid dishwashing soap and warm water for cleaning.
3. Do not use abrasive / harsh chemical when cleaning the  xture as they will damage and dull the
 nish.
3. Carefully read the cleaner product label to ensure the cleaner is safe for use on the material.
4. Test the cleaner on a small area before using on the entire surface.
5. Do not leave the cleaner on the  xture longer than necessary.
6. When using spray cleaners, spray  rst onto a soft cloth or sponge. Never spray directly onto the
faucet as droplets can enter openings and gaps and cause damage.
5. After cleaning, rinse thoroughly with clean water to remove any cleaner residue.
Temperature Control
Function Selector