Pacific Bay Treviso Roman Tub Faucet PB-RT01 User manual

Pacific Bay Limited Lifetime Warranty
!
Pacific Bay products have been manufactured under the highest standards of
quality and workmanship. Pacific Bay warrants to the original purchaser for as long
as the original purchaser owns their RV that this product will be leak- and drip-free
during normal use, and that all parts and finishes of this product will be free from
defects in material and manufacturing workmanship. Plated metal and plated plastic
finishes are warranted for (1) year.
If the product should develop a leak or drip during the warranty period, Pacific Bay
will, free of charge, provide the parts necessary to put the product back into good
working condition by you. They may also replace any part or finish that proves
defective in material and manufacturing workmanship, under normal installation,
use and service, free of charge. Proof of purchase (original sales receipt) from the
original purchaser must accompany all warranty claims. Defects or damages
caused by the use of other products or parts is not covered by this warranty. If
repair or replacement is not practical, Pacific Bay may elect to refund the purchase
price in exchange for the return of the product.
This warranty covers replacement of all defective parts and finishes. However,
damage due to product abuse, product misuse, installation error, or the use of
cleaners containing alcohol, abrasives, or other solvents, whether performed by a
contractor, service company, or yourself, will void this warranty. Pacific Bay will not
be responsible for labor charges and/or damages incurred in installation, repair or
replacement, nor any indirect, incidental or consequential damages, losses, or injury
costs of any nature relating to this product. Except as provided by law, this
warranty is in lieu of and excludes all other warranties, conditions and guarantees,
whether expressed or implied, statutory or otherwise, including without restriction
those of merchantability or of fitness for use.
Pacific Bay will advise you on how to proceed in making warranty claims. To begin
a warranty claim, write to Pacific Bay explaining the defect and include proof of
purchase and your name, address and telephone number. Email is
[e-mail].
* Never use cleaners containing abrasive cleansers, ammonia, bleach, acids, waxes,
alcohol, solvents or other products not recommended for plated metal or plastic
finishes. This will void the warranty.
19215 SE 34th St. Ste. 106-382
Camas, WA 98607
!
!
!
!
!
!
INSTALLATION MANUAL
Treviso Roman Tub Faucet
PB-RT01

INSTALLATION OF THE FAUCET
!
!
1Prepare for Installation
Drill a 7/8” diameter center hole into the
mounting surface for the spout shank and two
1-3/16” diameter holes 4” to either side of the
center hole for each valve body. (NOTE: If the
sink surface is uneven or irregular, plumber’s
putty or a silicone sealant may be used to
create a watertight seal. Plumber’s putty may
have an adverse effect on some cultured marble
or natural stone. In these cases, a high quality
silicone sealant may be used.)
2Install Faucet
Install the spout assembly through the center
hole of the counter with the rubber washer on top
and metal washer and locknut underneath. Hand
tighten locknut.
Attach the Y adapter to the hose connections by
threading it onto the end of the spout post. The
Y adapter does not need to be wrench-tight. The
adapter will not leak if it is slightly loose due to
the double o-ring design.
3Install Handles
Adjust the lower nut and washer on the stem
assembly by turning clockwise to lower. Install
the stem assembly by inserting it through the
hole from underneath the sink. Secure it in
place by slipping the o-ring over the top portion
and threading the brass locknut onto the top of
the stem assembly. Once done, tighten both
sides. To install handles, unscrew the bolt in the
handle slightly, push the handle onto the stem
assembly and secure by retightening the bolt.
Snap on hot and cold water indicators once
secure.
4Attach Flexible Supply Hoses
Attach the flexible supply hoses to the Y-
adapter to the stem assembly water outlts.
Make sure the rubber washers are in place in
the brass hose fittings before attaching them.
Tighten the hose fittings with a wrench.
5 Remove Aerator and Flush
Once installation of hoses is complete, remove
the aerator. Turn the water supply on and allow
both hot and cold water to run for 30 to 60
seconds. While water is running, check for leaks
around and under the sink. Once done replace
aerator. Your Pacific Bay faucet is ready to use.
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
MAINTENANCE AND CLEANING
Cleaning Tips: The finish on your product
is designed to retain its beautiful sheen
for years. To maintain the original look of
the finish, a little care and caution should
be used. We recommend the use of mild
soap and water to clean the product.
THE USE OF ABRASIVE CLEANERS MAY
SCRATCH THE FINISH OR CAUSE
OTHER DAMAGE.
RECOMMENDED TOOLS AND
MATERIALS
¨ Adjustable Wrench
¨ Plumbers Tape (Thread Seal
Tape)
¨ Plumber’s Putty or Silicone
Sealant
BEFORE YOU BEGIN
There are a variety of things to do before
installing any new plumbing system into
your home or residence. Before you begin
work make sure you:
¨ Shut off the main water supply
¨ Cover your drain to prevent
loss of parts
¨ Observed any local plumbing
codes
¨ Inspect fixture for damage -
Replace as necessary
Pacific Bay reserves the right to make any
revisions in the design of products without
notice.
!