Dedicated Micros DV-IP RT Operating instructions

DV-IP RT
Installation and
Operation Guide
Intelligent Security & Fire Ltd

Dedicated Micros ©2009
2
DV-IP RT
Whilst every attempt is made to ensure these manuals are accurate and current, Dedicated Micros reserve the right to alter or
modify the specication of the machine described herein without prejudice.
Contents
Introduction .......................................................................................................3
Features ...........................................................................................................4
Important Safeguards .......................................................................................6
Installing the Unit ..............................................................................................8
Conguring the Unit ........................................................................................22
Remote Control ..............................................................................................24
Main Menu ......................................................................................................26
Navigating The Conguration Menus .............................................................27
System Settings ..............................................................................................30
Console Settings ............................................................................................43
Camera Settings .............................................................................................54
Record Settings ..............................................................................................59
Alarm Settings ...................................................................................................... 69
Network Settings ............................................................................................84
Analytics & Text ..............................................................................................98
Archive ..........................................................................................................103
Oracle Dome Conguration ..........................................................................104
Unit Operation ..............................................................................................114
Appendix A ....................................................................................................136
Appendix B ...................................................................................................137
Appendix C ...................................................................................................139
Appendix D ..................................................................................................140
Appendix E ...................................................................................................141
Intelligent Security & Fire Ltd

Dedicated Micros ©2009 3
DV-IP RT
Introduction
What is the…
DV-IP RT ?
A comprehensive digital recording solution, the DV-IP RT is a stand-alone high-performance
recording system offering reliable, networked, scalable CCTV with real time viewing and recording
capabilities at an affordable price.
Ideal for installations were high record rates and network capabilities are required; the DV-IP RT
range includes Real Time ‘RT’ and Near Real Time ‘NT’ variants. RT units can achieve global record
rates of up to 25pps on all channels. NT units can achieve global record rates of up to 12pps on
all channels*. Both variants offer JPEG and MPEG-4 recording at scalable quality settings.
Dedicated Micros renowned MultiMode record feature enables an operator to set different recording
rates, resolution and compression formats across scheduled, normal and alarm modes for each
individual camera.
Available with 8, 16 or 32 camera inputs, all offering telemetry control, the DV-IP RT has built in
Alarm functionality and onboard Activity detection software.
Lip synched audio is available for each camera channels (except on 32 way unit).
To give operators maximum viewing exibility, the DV-IP RT can be congured to contain a mixture
of spot or main monitor outputs. Camera channels can be viewed in single or multi-screen mode on
a local monitor or remotely over an IP connection.
The accompanying Infra-Red (IR) Remote Control has a colour coded ‘Softkey’ interface with
conguration menus common to both local monitor and web interface, making for easy set-up and
operation.
Dedicated Micros trademark plug and play intuitive set-up and user-friendly interface helps keep
installation and operator training to a minimum.
The DV-IP RT includes as standard internal storage with expansion available via external high-
speed SATA ports. A DVD-R Writer and USB ports are provided for external video archiving.
The unit also offers integrated text support, allowing users to connect with cash registers in retail
applications to monitor Point Of Sale (POS) locations. Capturing and associating video with the
relevant text information allows the operator to search video footage by time, event, and text data to
provide evidence of fraud or to aid identication of regular offenders.
Among the many other features included as standard on the DV-IP RT are; multiway display and
remote monitoring using NetVu ObserVer (utilising DM’s unique TransCoding capabilities to provide
uent live and replay images).
With telemetry control of up to 16 cameras (including coax telemetry), control of dome cameras,
activity detection plus many more exciting features, the DV-IP RT is the ideal product when high-
performance video recording and transmission is required at an affordable cost.
For further information, please visit the website:
www.dedicatedmicros.com
or contact customer services in your region
* This manual is relevant to both RT and NT variants; all examples and images have been taken from
the RT unit.
**
Intelligent Security & Fire Ltd

Dedicated Micros ©2009
4
DV-IP RT
Features
The DV-IP RT from Dedicated Micros is equipped with an array of valuable features designed to
enhance the operator experience.
• 8, 16 or 32 camera input options
• Real time recording at QCIF to 4CIF resolution
• Telemetry support (Coax & Serial)
• Lip Synched Audio for up to 16 camera channel (dependant on model)
• I.P Camera support
• Alarm Inputs & Outputs
• Two way network intercom
• Internal storage
• All DVR functions fully supported by Keyboard/IR Remote Control/Mouse
• Scalable recording settings
• MultiMode Recording - Dynamically-switchable resolution, record-rate & compression
(MPEG4/JPEG) per camera
• Built in activity detection
• HDMI monitor support
• Single and Multiway displays
• Live and playback viewing locally and over Ethernet
• Point&go telemetry control
• JPEG or MPEG-4 recording and transmission
• Web pages provide easy remote conguration
• Embedded NetVu Console functionality
• Easy to use on-screen, colour coded softkey menu options
• Text support and text search features ideal for retail installations
• Built in DVD-R writer and USB ports for download of video archive to external ash
memory and uploading software updates
• Optional external keyboard available
• Conguration via USB mouse and USB QWERTY keyboard
• BS8418 compliant
The DV-IP RT has NetVu Connected technology built-in to ensure maximum compatibility with future
developments in networked security. NetVu Connected technology enables the DV-IP RT to fully
interact with other NetVu Connected compatible products from Dedicated Micros including the DV-IP
Decoder, NetVu ObserVer and PDA Viewers. Providing interoperability between the worlds leading
security companies, NetVu Connected uses industry standard networking protocols supported by a
wide range of third party integration products and SDKs to ensure future on-going compatibility.
COMMON CONFIGURATION INTERFACE
A Common Conguration interface is displayed when the unit’s conguration screens are accessed
locally at the unit or remotely via a web browser. This unied system ensures that the installer is
familiar with the conguration screens irrespective of their location to the unit, minimising training
and familiarisation time and increasing the speed of installation and alteration.
Intelligent Security & Fire Ltd

Dedicated Micros ©2009 5
DV-IP RT
The DV-IP RT includes a unique colour-coded menu structure and onscreen Graphical User
Interface (GUI). Context sensitive, the menu structure always represents the area of the menu the
user is in, allowing them to quickly select the options and settings they need without having to trawl
through menu pages and options. The colour coded buttons displayed on the monitor match those
on the IR Remote Control, whilst control can also be conducted through an attached USB Mouse or
supported Keyboard (DM/KBC1 / DM/KBC2).
VIDEO TIMELINE
The Video Timeline feature is a new intuitive interface for the control and navigation of playback
video. With control via the IR Remote Control or supported Keyboard, the colour-coded on-screen
display matches the buttons on the Remote Control or Keyboard allowing the user to control the
video forward or backwards in incremental steps of seconds, minutes, hours, days and weeks.
MAPS
Users can now navigate around their CCTV installation using graphical maps. Selecting the relevant
camera from the map will instantly connect the user to that cameras image stream. With the ability
to load bespoke map images and oor plans to reect their installations, the Maps feature is ideal for
quickly identifying camera locations around a site or CCTV network.
Point&go provides the user with easy to use, fast, accurate telemetry control via an attached
monitor. With no need for a telemetry keyboard, users are able to use Pan & Tilt control of a
Dedicated Micros Oracle Dome simply by clicking an area of the monitor. The camera will instantly
respond, positioning the selected area in the middle of the screen, ideal for tracking movement
through a scene.
ePTZ
Dedicated Micros ePTZ uses an advanced image ‘interpolation’ algorithm that reveals detailed
information that simple pixel-stretching digital zoom commands cannot. Users can operate ePTZ
as they would Analogue Zoom - moving around the scene and zooming in/out using the IR Remote
Control or a supported Keyboard - even on static analogue cameras. Electronic Zoom can be
carried out on both live and playback video. Providing the ability to retrospectively control and view
an image, a great aid in post-event analysis.
Absolute Positioning
Using Camera Selection Maps and the unique Absolute Positioning capability of Dedicated Micros
Oracle Dome cameras, an operator can, with one mouse click, select a camera and send it to view
an area of the site (Pan and tilt). Absolute Positioning is ideal for following someone from camera to
camera around a site and greatly increases event response time, particularly for operators unfamiliar
with a site layout and camera location.
Design of the manual
For ease of use, this manual has three parts:
1. Installation Shows details of how to install the unit and connect external devices.
2. Conguration Shows details of the unit’s menus.
3. Operation Shows quick reference details on how to control the unit.
The order and layout of these pages has been designed to help the setup process. It is
recommended that the menus are edited in sequential order to enable accurate, easy and efcient
setup.
Intelligent Security & Fire Ltd

Dedicated Micros ©2009
6
DV-IP RT
Important Safeguards
Read Instructions
All the safety and operating instructions should be read before the unit is operated.
Power Sources
This unit should be operated only from the type of power source indicated on the manufacturer’s
label.
Servicing
Do not attempt to service this unit yourself as opening or removing covers may expose you to
dangerous voltage or other hazards.
Refer all servicing to qualied service personnel.
Ventilation
Ensure unit is properly ventilated to protect from overheating.
All the safety and operating instructions should be read before the unit is operated.
To prevent re or shock hazard, do not expose this equipment to rain or moisture. The lightning ash
with arrowhead symbol within an equilateral triangle is intended to alert the user of this equipment
that there are dangerous voltages within the enclosure which may be of sufcient magnitude to
constitute a risk of electric shock.
This is a class A product. In a domestic environment this product may cause radio interference in
which case the user may be required to take adequate measures.
Lightning Strike
The unit has some in-built protection for lightning strike, however it is recommended that isolation
transformers be tted to the system in areas where lightning is a common occurrence.
Regulatory Notes and FCC and DOC Information
(USA and Canadian Models Only)
Warning: This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful interference to
radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at their own expense.
If necessary, the user should consult the dealer or an experienced radio/television technician for
corrective action. The user may nd the following booklet prepared by the Federal Communications
Commission helpful: “How to Identify and Resolve Radio-TV Interference Problems”.
This booklet is available from the US Government Printing Ofce, Washington, DC20402,
Stock No. 004-000-00345-4.
This reminder is provided to call the CCTV system installer’s attention to Art. 820-40 of the NEC that
provides guidelines for proper grounding and, in particular, species that the cable ground shall be
connected to the grounding system of the building, as close to the point of cable entry as practical.
Intelligent Security & Fire Ltd

Dedicated Micros ©2009 7
DV-IP RT
CE Mark
If this product is marked with the CE symbol it indicates compliance with all applicable directives.
Directive 89/336/EEC.
A ‘Declaration of Conformity’ is held at Dedicated Micros Ltd.,
1200 Daresbury Park, Daresbury, Cheshire, WA4 4HS, UK.
Laser
The unit supports an integrated CD/DVD writer, the following are additional warnings associated with
installing and operating the CD/DVD writer, please pay particular attention to this information.
• Caution - Use of controls or adjustments or performance of procedures other than those
specied herein may result in hazardous radiation exposure.
• To prevent exposure to laser emanations (harmful to the eyes), do not attempt to
disassemble this unit.
Intelligent Security & Fire Ltd

Dedicated Micros ©2009
8
DV-IP RT
Installing the Unit
Before you start
Check the contents of the box
Remove all items from the packaging and check the items listed below are present:
• DV-IP RT (either 8, 16 or 32 input)
• IR Remote Control
• IR Remote Control Extender
• USB Mouse
• Power Leads
• Rack mounting brackets
• DV-IP RT Software disc
• DV-IP RT Installation & Operation Guide
• Quickstart Guide
If any of these items are missing, please contact Dedicated Micros Technical Support team.
Note: Before installing the DV-IP RT DVR, carefully read all Safety Instructions and the following
information on where the unit should be located.
Available Accessories
The following accessories can also used in conjunction with the DV-IP RT:
• KBC1 Keyboard
• KBC2 Keyboard
• Managed Storage Unit - Extend storage capacity
• Managed Continuous Archiving - Mirrored RAID1 storage unit
• Congurable 8 disk RAID system (default is RAID5)
For further information about any of the above products, please contact Dedicated Micros customer
services in your region.
Choosing a location for installation
• The DV-IP RT is designed to be desk, shelf or rack mounted.
• Ensure the DV-IP RT is properly ventilated to protect from overheating.
• Ensure there is a 3cm gap on both sides of the unit.
• Ensure the receiving end of the IR remote control extender faces the operator position
and is not more than 3 metres (10 feet) from the operator.
• Ensure the unit is not located anywhere it could be subject to mechanical shocks.
• The unit should be located in an area with low humidity and a minimum of dust. Avoid
places like damp basements or loft spaces.
• If the unit is to be installed in a closed assembly, the maximum operating temperature
must not exceed 40°C (104°F).
• Ensure there is reliable earthing of the mains outlet when tted to supply connections
(other than direct connection to the branch circuit).
• Any branch circuit supplying the unit must be rated at 15Amps.
• It is recommended that an uninterrupted power source be connected to the unit in case
of power failure (to ensure continuous operation of the unit).
Intelligent Security & Fire Ltd

Dedicated Micros ©2009 9
DV-IP RT
ELECTRICALCONNECTIONS
Please ensure the following are available and have been tested prior to the installation:
• Mains point
• Network point
• Network cable
• Active video signals i.e. at least one working camera feed
• PC with CD ROM drive and connection to the same network as the DV-IP RT unit
(Recommended)
Quick Overview of DV-IP RT Record Settings
The DV-IP RT provides as default:
High performance recording on ALL cameras with minimal conguration.
Consistent recording duration and smooth motion video per camera regardless of the number
of cameras.
Default record settings for ‘Real Time’ variant units are MPEG4 25pps, JPEG 4pps or
MultiMode recording.
Default record settings for ‘Near Real Time’ variant units are MPEG4 12pps, JPEG 2pps or
MultiMode recording.
Pre-congured 2, 7, 14 or 30 day storage settings (dependant on model).
Complete Flexibility
The advanced record menu can be used to congure individual cameras to suit specic
requirements e.g. Entry/Exit routes. Various storage sizes are available dependant on the number of
cameras, the storage options and recording rate selected.
The picture quality can easily be increased if less than 30 days standard recording is required.
Note: It is the Installer/Owner’s responsibility to ensure that the record duration is set to the
necessary requirements of the application.
MultiMode Recording
The unit supports MultiMode recording which is a storage technology developed by Dedicated
Micros. This offers the ability to set different recording rates, resolutions and compression formats
across scheduled, normal and alarm modes for each individual camera.
By varying the quality, bit rate and le size of the recorded images, the MultiMode function can
increase recording capabilities of the unit.
MultiMode offers:
Ability to set different recording resolutions.
Ability to set and switch MPEG4 or JPEG compression recording as required.
Ability to set PPS recording rate per camera.
Dynamically switchable resolution when switching from Normal to Event recording.
Dynamically switchable compression between MPEG4 and JPEG from Normal to Event
recording.
Intelligent Security & Fire Ltd

Dedicated Micros ©2009
10
DV-IP RT
Installation
Front Panel connections
Data
DVD-R Internal DVD-R drive (located under hinged ap)
USB USB2.0 connector (located under hinged ap)
LED’s Power - The Power LED will be green to indicate power is connected to the unit
HDD (Hard Disk Drive) - This will ash when images are being stored to the hard disk
Network - The Network LED will be green to indicate a connection
Rear Panel connections
32 Input model
16 Input model
8 Input model
REARPANELDWGSERVER.EPS
Intelligent Security & Fire Ltd

Dedicated Micros ©2009 11
DV-IP RT
Video
8. 16 & 32 way units
VID1 to VID8/VID16/VID32 75Ω BNC composite video input, 1V pk-pk with loop through
available on 8 and 16 input variants.
MON A 75Ω BNC composite monitor output, 1V pk-pk
MON B Spot Monitor output
MON A S Video Connection
HDMI High-Denition Multimedia Interface connectior
Audio
Audio IN (Dual) RCA (phono) socket, 8KHz/16KHz/22KHz sampling 75Ω input
impedance, 1V pk-pk
Audio OUT (Dual) RCA (phono) socket, line level <100Ω output impedance,
1V pk-pk amplication required
8 & 16 way units
8/16 RCA (phono) sockets for each camera channel
Data
SERIAL 1 RS-232 (3 wire & 9 wire)
SERIAL 2 RS-232 (3 wire & 9 wire)
SERIAL 3 (PTZ) RS-485 (2 wire) or RS232 (5 wire)
SERIAL 4 (PTZ) RS-485 (2 wire) or RS232 (5 wire)
USB 2x USB2.0 connectors
IR Infra-Red Input connector for IR Remote Control Extender
NET1 RJ45 Ethernet network connector, 10/100 Mb/s Ethernet Network
NET2 RJ45 Ethernet network connector, 1 Gb/s Ethernet Network
KBD RJ12 connector for use with Dedicated Micros telemetry
keyboards (KBC1, KBC2)
EXP RJ12 expansion port for future use
SATA 2x E-Sata ports available for storage expansion
Power
POWER IEC mains power socket & switch
Alarms and relays
ALARMS IN Via 25-way (female) D Type 24V 200mA
20 general alarm inputs
Range of Alarm states are:
i. 0 – 800R = Short circuit
ii. 800R – 2K = closed contact
iii. 2k – 12k = open contact
iv. > 12K = open circuit
RELAYS Via 9-way (female) D Type rated at 24V 200mA
4 onboard light duty relay output (500mA@ 12V-48V Max)
Intelligent Security & Fire Ltd

Dedicated Micros ©2009
12
DV-IP RT
Installing the DV-IP RT
This procedure shows the sixteen camera input version.
Step 1 Connecting Video
The DV-IP RT supports up to 8, 16 or 32 connected Video Inputs (dependant on model) via the 75Ω
BNC connectors. Connect cameras to the video inputs, starting from input 1.
8 and 16 channel variants have two rows of connectors providing video input and loop-through
support. It is possible to use either the top or bottom row of connectors; For consistency and quality
of installation, DM recommend one row is used for video inputs and the other for all required loop-
through connections onto other pieces of equipment e.g. monitors and matrices.
Note: Remember the last piece of equipment in line must be terminated.
Double termination (not removing termination from the unit) will result in the 1V peak to peak video
signal being crushed. This can reduce the colour rendition of the video source and may cause the
video signal not to be detected by the last piece of equipment i.e. the signal is no longer 1V peak-
to-peak.
5.12
Intelligent Security & Fire Ltd

Dedicated Micros ©2009 13
DV-IP RT
Step 2 Monitor
The DV-IP RT supports a main monitor via ‘HDMI 1’ and BNC ‘A’. A spot monitor can be connected
via BNC ‘B’.
Step 3 Connecting Auxilliary Audio
The DV-IP RT supports two channels of bi-directional audio, accessible through NetVu ObserVer.
Connect the audio equipment to the phono sockets AUDIO IN and AUDIO OUT. The audio channel
defaults to record camera 1.
The following modes of operation are supported:
• Challenge – intruders from a Remote Video Response Centre (RVRC)
• Listen – to local audio from a site at the RVRC
• Record - local audio from a site to accompany video
• Replay - all audio through a local Audio output (not supported when
Audio out is used as a challenge/PA source)
Note: The Audio output can be congured as a challenge output or as a replay output.
Intelligent Security & Fire Ltd

Dedicated Micros ©2009
14
DV-IP RT
Step 4 Connecting Audio per Camera Channel
The DV-IP RT can be congured to use lip-synched audio per camera on 8 way and 16 way
variants, OR to use the Aulilliary Audio inputs on any variant.
Auxilliary audio Input 1 Local console Aduio Input
Input 2 Reserved for local client challenge audio input
Output 1 Live challenge audio
Output 2 Congurable for either local console recorded/live playback
or Challenge audio live or playback
Note: Output 2 is currently only congurable via the NetVu ObserVer interface
Step 5 Connecting to the Network
The DV-IP RT has both 10/100/1000Mbps (labelled NET 1) and 10/100Mbps (labelled NET 2) auto-
detecting network ports.
The Network port labelled ‘NET 1’ should be used for 1Gb Network Connections. If utilising this port,
network conguration should be undertaken via the Conguration Menu pages:Network Settings-
>GbNetwork.
For other Network connections, utilise Network port labelled ‘NET 2’. If using this port, network
conguration should be undertaken via the Conguration Menu pages:Network Settings->Network.
Intelligent Security & Fire Ltd

Dedicated Micros ©2009 15
DV-IP RT
The above diagram shows typical network topology when utilising both network ports. It is strongly
recommended that:
• NET 1 (1Gb ethernet port) be used for all Server IP video sources.
• NET 2 (10/100 ethernet port) be assigned to the Client Network
for Viewing and Control.
IMPORTANT: If utilising both Network ports, different IP addresses must be assigned to
both connections. These IP addresses must not be in the same subnet.
It is possible to utilise only one network port; however this will limit the performance of the unit and
should be avoided if possible.
Note: The unit will not act as a router between the subnets on NET 1 and NET 2. A 3rd party
router would need to be congured for this purpose
Use a CAT5 cable to connect the unit to the network.
By default the unit is congured for DHCP i.e. the unit is automatically allocated an IP address from
a network DHCP server.
DHCP works by assigning an IP address at initial connection to the network. It is possible however
that this IP address can change without notication i.e. following power failure. It is therefore
recommended that the DV-IP RT be allocated a xed IP address. A xed IP address can be
assigned via the Conguration Menu pages:Network Settings->Network->IP Address or Network
Settings->GbNetwork->IP Address.
Use the ‘GbNetwork’ menu for 1Gb Network connections (using network port ‘NET1’) and the
‘Network’ menu for other network connections (using network port ‘NET2’).
When the unit is powered up, the network address can be found by viewing on a local monitor and
navigating to Conguration Menu pages:System Settings->System->IP Address.
Refer to ‘Conguring The Unit’ for further guidance on locating the unit’s IP address and for details of
the default DNS (Domain Name Server) address.
Intelligent Security & Fire Ltd

Dedicated Micros ©2009
16
DV-IP RT
3Step 6 Relays
The DV-IP RT supports up to four 24V 200mA relays.
Relay Connector
Pins Connection
1 / 6 Relay 1 signal
2 / 7 Relay 2 signal
3 / 8 Relay 3 signal
4 / 9 Relay 4 signal
Step 7 Alarms
The DV-IP RT supports 20 normally open/closed tamper proof alarm inputs, or one Global keyswitch
input with camera specic inputs congurable as entry/exit alarms. The alarms support tamper proof
detection using 1k in line and 5K end of line resistance. The DV-IP RT detects short circuit, open
circuit and contact closure. This functionality is part of the advanced alarms supported on NetVu
Connected products and includes features required for Central Monitoring. It is compatible with the
British Standard BS8418.
Relay Connector
Pin Alarm Input Connection
1 - 20 1-20
21-25 Earth Common
Intelligent Security & Fire Ltd

Dedicated Micros ©2009 17
DV-IP RT
End Of Line Circuitry
The following describes the EOL tamper alarms circuitry needed when EOL has been congured.
There should be two resistive values within the tamper alarm circuitry. These must be located inside
the alarm device (furthest point from the unit).
The alarm state could be Normally Open or Normally Closed, however the tamper states are the
same for both settings.
Open, the resistive value is 6.8K ohms (1K + 5.6K).
Closed, the resistive value is 1K ohms, as the circuit does not see the 5.6K ohm resistor.
Open Circuit Tamper, the resistive value is innity as the circuit has been cut and therefore is ‘open’.
Short Circuit Tamper, the resistive value is 0 ohms.
Step 8 Connecting Serial Ports
Serial ports have two main uses:
1. Connecting twisted pair telemetry for PTZ cameras.
2. Providing text data recorded with the video e.g. Point of Sale.
Note: Telemetry cameras should be connected to Serial 3 and 4. Text data can be retrieved from
any serial port.
Intelligent Security & Fire Ltd

Dedicated Micros ©2009
18
DV-IP RT
RS232
RS485
Note: Refer to Appendix A for further guidance on Serial Port pin allocation for
Telemetry cameras.
Step 9 Connecting a Keyboard
The DV-IP RT supports Dedicated Micro keyboards DM/KBC1 and DM/KBC2. Connect either of
these keyboards via the KBD connector situated on the rear of the unit.
Note: Refer to ‘Unit Operation’ for further guidance regarding supported keyboards.
Step 10 Connecting Telemetry Cameras
Simple Dome Connection
All Domes used inconjunction with the unit should be set with RS485 unterminated at the Dome.
Pin connections for RS485 connection to a dome on serial port 3/4 are:
Dome Cable DV-IP RT Serial Connector
Yellow 1 TX+
Green 9 TX-
If the dome is being connected using an RS485 connection, the dome address should be set to
match the camera input number on the DV-IP RT i.e. if the dome is connected to video input 3, the
camera address should be ‘03’.
DM 2040 & 2060 Domes
A DM 2040/2060 Dome can be connected via either co-axial telemetry or RS485 twisted pair.
If using co-axial telemetry the address switches should be set as:
Blue switch - F Yellow switch - D
Intelligent Security & Fire Ltd

Dedicated Micros ©2009 19
DV-IP RT
DM Oracle Domes
A DM Oracle dome can be connected via either co-axial telemetry or RS485 twisted pair. Oracle
Domes are congured using the specic pages available in the Conguration menu, refer to ‘Oracle
Dome Conguration’ for more information.
The DM Oracle Dome has three address switches, refer to the Oracle Dome documentation for
more information on hardware confguration.
UTC
Red - 1
Blue - N/R
Yellow - N/R
Serial
Red - 2
Blue - Camera Number
Yellow - Camera Number
Note: To enable conguration of Oracle Dome menus, an RS485 connection is required.
Step 11 Connecting IR Remote Control Extender
Connect the IR Remote Control Extender to the IR Input socket. This must be connected to
successfully use the IR Remote Control.
Intelligent Security & Fire Ltd

Dedicated Micros ©2009
20
DV-IP RT
Step 12 Connecting Power
The DV-IP RT has an internal power supply unit. Connect the mains lead to the unit and then to
the wall socket, or to a fused spur connection. Check local regulations before installation. Some
countries require an Alarm/Security device be connected to a fused spur and not a wall outlet
socket.
Intelligent Security & Fire Ltd