DeDietrich DVH1044X User manual

EN INSTRUCTION MANUAL

Reviewing the section on troubleshooting Tips will help
you solve some common problems by yourself.
Dea r Customer,
Please care fully rea d this manual bef ore using the
dishwasher, it will help you use and maintain the
dishwasher properly.
Pass it on to any sub sequent owner of the applianc e.
This ma nual con tains sections on safety In stru ctions,
Ope rating Instruction s, In stallation Ins truc tion s and
Trou bleshooting Tips, etc.
The manufacture r, following a policy of constant
development and updating of the product, may
make modifi catio ns w ithout giving prior notice.
If lost or out-of-d ate, you can receive a new user
manual from the manufactur er or responsible
vendor.
Keep this manual for future reference.
If you cannot solve the problems by yourself,
please ask for help from a professional technician.
Dishwash er Fe at ures............. ... ... ............... .. ........ 6
AWater Soften er. .... .... ... ...... ......... .... .... ............. 7、
................................... ............... 12
Rec ommendations fo r lo ading and unloading
the dishwasher
Filter System............... ........................................16
Caring for the Di shw asher..................... ..............17.
B Loadi ng the Salt into the Softener......................8、
C Fil ling the Rinse Aid Dispenser......................... 8、
D Functi on of Detergent ......................................9、
Loading the upper ............... .....................13Basket
Loa ding the Lower ....................................13Basket
Wash Cycle Table.... ....................................... .....14
Turning on th e Appliance.............................. .......14
...... ..................15
Changing the P rogram mid-cycle ..
At the end of the Wash Cycle................................15
Before c alling for service........................... ... ... ....25.
Error codes.................................... ...................26.
Technical information.............................. ..........27..
Control Panel.................................................. ......6
Installation preparat ion.................................. .....18
........19Aesthetic panel's dimensions and installation
Ten sio n ad jus tment of the door spring .................. .21
C onne ction o f dr ain hos es...... ..... ......... ...... .... .... .21
Dishwasher installation steps......................... .....22
Abo ut E lec tri cit y Con nectin g.... ... .. ... .......... .. ... .... .2 3
Cold Water Connection.................................. .....24

This appliance is intended to be used in household
and similar applications such as:
-staff kitchen areas in shops, offices and other
working environments;
-farm houses;
-by clients in hotels, motels and other residential type
environments;
-bed and breakfast type environments.
This appliance can be used by children aged from 8
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision
or instruction concerning use of the appliance in a
safe way and understand the hazards involved.
Children shall not play with the appliance. Cleaning
and user maintenance shall not be done by children
without supervision.(For EN60335-1)
Packaging material could be dangerous for children!
This appliance is for indoor household use only.
To protect against the risk of electrical shock,
do not immerse the unit, cord or plug in water or
other liquid.
Please unplug before cleaning and performing
maintenance on the appliance.
Use a soft cloth moistened with mild soap, and then
use a dry cloth to wipe it again.
When using your dishwasher,
follow the precautions listed below:

2
This appliance must be earthed. In the event of a
malfunction or breakdown, earthing will reduce the
risk of an electric shock by providing a path of least
resistance of electric current. This appliance is
equipped with an earthing conductor plug.
The plug must be plugged into an appropriate outlet
that is installed and earthed in accordance with all
local codes and ordinances.
Improper connection of the equipment-earthing
conductor can result in the risk of an electric shock.
Check with a qualified electrician or service
representative if you are in doubt whether the
appliance is properly grounded.
Do not modify the plug provided with the appliance;
If it does not fit the outlet.
Have a proper outlet installed by a qualified electrician.
Do not abuse, sit on, or stand on the door or dish
rack of the dishwasher.
Do not operate your dishwasher unless all enclosure
panels are properly in place.
Open the door very carefully if the dishwasher is
operating, there is a risk of water squirting out.
Do not place any heavy objects on or stand on the door
when it is open. The appliance could tip forward.
When loading items to be washed:
1) Locate sharp items so that they are not likely to
damage the door seal;

3
2) Warning: Knives and other utensils with sharp points
must be loaded in the basket with their points
down or placed in a horizontal position.
Check that the detergent powder is empty after
completion of the wash cycle.
Do not wash plastic items unless they are marked
dishwasher safe or the equivalent.
For check the
manufacturer's recommendations.
Use only detergent and rinse agents recommended for
use in an automatic dishwasher.
The door should not be left open, since this could increase
the risk of tripping.
If the supply cord is damaged, it must be replaced by the
manufacturer or its service agent or a similarly qualified
person in order to avoid a hazard.
During installation, the power supply must not be
excessively or dangerously bent or flattened.
Do not tamper with controls.
The maximum number of place settings to be washed
is 10.
The maximum permissible inlet water pressure is 1MPa.
The minimum permissible inlet water pressure is 0.04MPa.
facing
“ ”
unmarked plastic items not so marked,
Never use soap, laundry detergent, or hand washing
detergent in your dishwasher.
The appliance needs to be connected to the main water
valve using new hose sets. Old sets should not be reused.

4
This appliance's packaging materials are recyclable.
Dispose of the packaging into a suitable waste
collection container to recycle it.
It is prohibited to dispose of this appliance as
household waste.
Correct Disposal of this product: this symbol on the
product or in its packing indicates that this product
may not be treated as household waste. Instead,
it should be taken to the appropriate waste collection
point for the recycling of electrical and electronic
equipment. By ensuring this product is disposed of
correctly, you will help prevent potential negative
consequences for the environment and human health,
which could otherwise be caused by the inappropriate
waste handling of this product.
For more detailed information about the recycling of
this product, please contact your local council your
household waste disposal service, or the shop where
you purchased the product.
For disposing of package and the appliance please
go to a recycling centre. Therefore cut off the power
supply cable and make the door closing device
unusable.
Cardboard packaging is manufactured from recycled
paper and should be disposed in the waste paper
collection for recycling.
By ensuring this product is disposed of correctly, you
will help prevent potential negative consequences
for the environment and human health, which could
otherwise be caused by inappropriate waste handling
of this product.
For more detailed information about recycling of this
product, please contact your local city office and your
household waste disposal service.
DISPOSAL: Do not dispose this product as unsorted
municipal waste. Collection of such waste separately
for special treatment is necessary.

For detailed operating method read the corresponding conte nt on the instruction manual.
Check the rinse aid level
(On models with water softener system only.)
Electric indicator on control panel (if provided).
If there is no salt warning light in the control panel
(for some models), you can estimate when to fill the salt into
the softener by the number of cycles the dishwasher has run.
Check the regeneration
salt level
Load the baskets
Select a program
Running the dishwasher
Fill the detergent dispenser
To lo ad the bask ets, ref er to the sec tio n en titled Pre paring and L oading Dishe s .“ ”
Switch on the appliance
Switch off the appliance
Turn off the water tap,
unload the baskets
Warning: w ait a f ew min utes (about 15 minutes) before unloa ding th e dish washer to avoid
handling the dishes and utensils while they are still hot and more susceptible to break.
The dishes will al so dry better. First start unloading the lower basket.
Changing the program
Ad ding fo rgotte n dish es
in t he dis h was her.
If the appliance is switched
off during a wash cycle.
Open th e do o r car efully.
Look o ut for hot ste am
when openin g the d oor!
If the appliance is switched off during a wash cycle, when switched
on again, please re-select the washing cycle and operate the dishwasher
according to the original Power-on state ).
1. A running cycle can only be modified if it has been running for a short time. Otherwise the detergent
may have already been released and the water already drained. If this is the case, the detergent
dispenser must be refilled.
2. Press the Start/Pause Button to stop washing , Then press programme button after 3 seconds,
the program will cancel.
3. Turn the selector to select a new program.
4. .Press the Start/Pause Button, the dishwasher will run after 10 seconds.
1.Press the Start/Pause Button to stop the washing.
2.Open the door a little .
3.After the spray arms stop working, you can open the door completely.
4.Add forgotten dishes.
5.Close the door
6.Press the Start/Pause Button, the dishwasher will run after 10 seconds.
Turn on the water tap and press the Start/Pause Button. The machine will start working
after about 10 seconds.
Close the door, press the program button until the selected program indicator lights up.
( See the section entitled Operation instruction )“ ”
Press the On/Off button to switch on the appliance, Open the door.
When the working cycle has finished, the buzzer of the dishwasher will sound 8 times, then stop.
Turn off the appliance using the On/Off Button.
Since the appliance is standing by, it will power off automaticly after 30 minutes without any operation.
For each wash cycle.
For programs with pre-wash,please put the detergent anywhere inside the
inner tank except in compartment A
(Follow the user instructions!)
Electric indicator on control panel (if provided).

before using it for the first time.
To get the best perform ance from your dishwasher, read all operating instructions
Ba ck View
Front view
6.Dual zone wash function, press the button
to se lect either upper basket or lower basket load, and
the response indicators will light on.
2.Option function indicator:
Extra Drying----
Express---------
wash--Strong
4.Language Button:Press the button to select
the appropriate language.
Eng lish=>Fr ench=>German=>Russian=>
=>Dutch
Italian
1.On/Off Button:To switch On/Off the app liance.
9.Display screen: tim e and
the state(running state, delay time,error codes etc )
It shows the remaining
8.Start /Pause button:Start the selecte d washing
program or pause the w ashing program when the
machine is working.
7.Progra m Button : Press the button to sel ect a wash
program
3.Option Button :Press th e button to select option
function as the following direction.
Extra Dryi ng =>Express=>Strong w ash
5.Delay Button : Press the button to add the delay time. Program indicators:
Rinse Aid indicator:
Indicates when the dispenser needs to be refilled.
Child lock indicator:
Add salt indicator:
Indicates when the dispenser needs to be refilled.
Delay function indicator:
Language indicator:
Delay time ,Remain time ,or error codes indicator:
Dual zone wash indicator:
1
2
3
4
5
7
6
11
8
Lower basket
Sa lt container
Dispenser
Cup shelf
Spray arms
Filter assembly
Inlet pipe connector
Drain pipeUpper basket
Cutlery rack
1
Inner pipe
5
6
7
8
9
10
11
3
2
4
9
10

The water softener must be set manually, using the water hardness dial.
The water softener is designed to rem ove minerals and salts from the water, which woul d have
a detrimental or adverse effect on the operation of the appliance.
The more minerals there are, the harder your water is
The softener sho uld be adjusted according to the hard ness of the water in your area. Your local Water Author ity
can advise you on the hardness of the water in your area.
Adjusting Salt Consumption
The dishwasher is designed to allow for adjustment in the amount of sa lt consumed based on the ha rdness of
the water used. This is intended to optimise and customise the level o f salt consumption.
WATER SOFTENER
The hardness of the water varie s from place to plac e. If hard water is used in the dishwasher, de posits will
form on the dishes and utensils.
The appliance i s equipped with a special softener that uses a salt container specifically designed to eliminate
lime and minerals from the water.
Contact your local water board for information on the hardness of your water supply.
If your model does not have any water softener, you may skip this section.
Clark: British degree
fH: French degree
dH: German degree
dH=1.25 Clarke=1.78 fH=0.178mmol/l
1
The manufactory setting: H3 (EN 50242)
Before using you r dishwasher for the first time :
A. Set the water softener
B. Add 1.5Kg dishwasher salt and then full fill the salt con tainer with water
C. Fill t he rinse aid dispenser
D. Fill in detergent
Please follow the steps below for adjustm ent in salt consumpt ion.
dHmmol/l
0~90~5 0~0 .9 4 H1 0
10-20
6-11 1.0-2.0 H2 9
21-3012-17 2.1-3.0
H3 12
H 4 20
fH
0~6
7-14
15-21
Clarke
WATER HARDNESS
Sel ector P osition Salt consumption
(gram/cycle)
18-22 31-40 2 2-28 3.1-4.0
41-6023-34 4.1-6.0 H5 30
H 6 60
29-42
35-55 61-98 4 3-69 6.1-9.8
1. Close the door ,Switch on the appliance;
2. Press the Star/Pause button for more than 5 seconds to start the water softener
set model within 60seconds after the appliance is switched on( The Salt and
Rinse aid war ning lights will be on periodically when it get in the set model );
3. Press the but ton to select the proper set according to your local environment,
th e sets will chang e in the following sequence: H1->H2->H3->H4->H5->H6;
4. Press the Power button to end the set up model.
Star/Pause

1. The salt container must only be refilled when the salt warning light in the control panel comes on.
Depending on how well the salt dissolve s, the salt warning light may still be on even though the
salt container is filled.
If there is no salt warning light in the control panel (for some Mode ls),you can estimate when to fill
the salt into the softener by the cycles that the dishwasher has run.
2. I f sal t has spilled, run a soak or quick program to remo ve it.
Always use the salt intended for for dishwasher use.
The salt co ntain er is located beneath the lower basket and should be filled as explained
in the foll owing:
Warning!
Only use salt specif ically designed for dishwashers ! Every other type ofuse
salt not speci fically desig ned fo r dishwasher , especially table salt, wil luse
damage the w ater softener. In case of damages caused by the use of unsuitable
salt the manufacturer does not give any wa rranty nor is liable for any damages caused.
Only fill with salt before running a cycle.
This will prevent any g rains of salt or salty water, which ma y have been spilled,
remaining on the bottom of the machi ne for any period of time, which may cause
corrosi on.
The rinse aid is released d uring the final rinse to prevent water from forming droplets on your dishes, whic h can
leave spots and streaks. It also improv es drying by allowing water to r oll off the dishes. Your dishwasher is
designed to use liquid rinse aids. The rinse a id dispenser is located inside, on the door an d next to the detergent dispens er.
To fill the dispenser, ope n the cap and pour the rinse aid into the dispenser until the level indicator turns c ompletely black.
The vo lume of the rinse aid container is about 110ml.
Rinse Aid Dispenser
Function of Rinse Aid
Rinse aid is automatically added during the last rinse, ensuring thorough rinsing, a s pot and strea k fre e drying.
Warning!
Only use branded rinse aid for dishwasher. Never fill the rinse aid dis penser with any other substances
(e.g. Di shwasher cleaning agent, liquid detergent). Th is would damage the appliance.
It i s normal fo r a small amou nt of water t o
come out of the salt container.
Fill the salt cont aine r to its maximu m limit wit h wate r.
AAfter the lower basket has been removed, unscrew and remove the cap from the salt container.
BPlace the end of the funnel (supplied) into the hole and poor in about 1.5kg of dishwasher salt.
C
DAfter fil ling the container , screw back the cap tightly.
EThe salt warning light will stop being after the sa lt contain er has been fill ed with sa lt.
FImm ediately after filling the salt into the salt container, a washing program should be started
program Otherwise the filt er system, pump or ot her important parts of the machine may be damaged
by salty water. This is out of warranty.
(We suggest to use a short
).

To open the di spenser, turn the cap to the "open" (left) arrow and lift it out.
Caref ul ly pour i n the ri nse-aid i nto it s disp enser, wh il st avoid in g it t o overfl ow.
Replace the cap by inserting it aligned with "open " arrow and turning it to the closed (right) arrow.
Adjusting Rinse Aid Dispenser
The rinse aid dispenser has six or fou r set tings. Always st art with the dispe nser
set on "4". If spots and poo r drying are a problem, increase the amount of rinse
aid dispensed by removing the dispe nser lid and rotating the dial to "5". If the
dishes still are not drying properly or show spots, adjust the dial t o the next
higher lever until your dishes are sp ot-free. The recommended setting is "4".
(Factory value is "4".)
Increa se the dose if there are drops of wate r or lime spots on the di shes after washing.
Reduce i t if there are sticky whitish stains on your dish es o r a bluish fil m on glassware or
knife blad es.
1
2
3
As the rinse aid d iminishes, the size of the black dot
on the rinse aid level indicator changes, as illustra ted b elow.
Full
3 / 4 full
1 / 2 full
1 / 4 full - Should refill to eliminate spotting
Empty
When to Refill the Rinse Aid Dispenser
Unless the rinse-aid warning light on the control panel is on, yo u ca n always estima te th e amount from t he color
of the optical level indicator "C "located next to the cap. When the rinse-aid container is full, the indicator
wi ll be fully dark. T he s ize of the dark d ot d ecreases as the rinse-aid diminis hes. You should never let
the rinse a id level be less than 1/4 full.
ne xt wash. Don't forget to replace the cap b efore you close the dishwasher door.
Clean up any rinse aid spilled while during fillin g with an absorbent cloth to avoid excessive foaming
The chemical ingredients that c ompose the detergent are necessary to remove, crush and dispense all dirt out of the
di shwashe r. Most of the commercial qualit y de tergents are suitable for this purpose.
" "
Proper Use of Detergent
Use only detergent specifically made for dishwasher use. Keep your detergent fresh and dry.
Don't put powdered detergent into the dispenser until you are ready to wash dishes.
Warning!

Amount of Detergent to Use
Based on their chemical com position, detergents can be split in two basic types:
Detergent tablets of diffe rent brands disso lve at different speeds. For this reason some
detergent tablets cannot dissolve and develop the ir full cleaning power during short
prog rams. There fore please use long programs wh en using deterg ent t ablets, to
ensure the complete removal of detergent residuals.
The dispenser must be re filled before the start of each wash cycle f ollowing the instructi ons
provided in the wash cycle table . Your dis hwa sher uses less detergent and rinse aid than
Conventiona l dishwa sher. Generally, only one tablespoon of detergent is needed for
a normal wash load. More heavily soiled items need more detergent. Always ad d the
detergent just be fore starting the dishwasher, otherwise it could get damp and w ill not
dissolve properly.
Concentrated Detergent
Detergent Tablets
Detergent Dispenser
co nventional, alkaline detergents w ith caustic comp onents
low al kalin e co ncentrated detergents with natural enzymes
Normally new pulverised detergent is with out phosphate. Thus the water softener fu nction of
phosphate is not given. In this case we recommend to fill salt in the salt con tainer even when
the hardness of water is only 6 dH. If detergents witho ut phosphate are used in the case of hard water
often white spots appear on d ishes and glasses. In this case please add more deter gent to reach
better results. Detergents without chlorine do only bleach a little. Strong and coloured spots wil l not
be removed com pletely. I n this case please choose a program with a higher temperature.
°
Detergents
There are 3 sorts of d etergents
1.With phosphate and with ch lorine
2.With phosphate and without chlorine
3.Withou t phosphate and without chlorine
Always add the detergent just before starting each wash cycle.
Only use branded detergent aid for dishwasher.
If the lid is closed: press release button. The lid will open.
Detergent powder
Dishwasher detergent is corrosive!
Take care to keep it out of reach of children.

Fill the detergent dispenser with detergent.
The marking indicates the dosing levels , as
Illustrated :below
Please observe the manufacturers do sing and storage
Recommendations as stated o n the detergent packaging.
Close the lid a nd p ress on it until it locks into place.
If the dishes are heavily soiled, place an a dditi onal
detergent dose in the pre-wash detergent chamber. This detergent will take effe ct during the pre-wash phase.
Filling the detergent dispenser
You information about the amount of detergent for th e single programme on page 14.
will find
Be aware that dep end ing on th e soiling of wate r, setting ma y be diffe rent.
Pl ease observe the manufacturer's recommendations on the detergent packaging.
1. Place the main washing cycle detergent in the storage
compartment indicated with an A on the picture.
Th e marking on the compar tment indica tes the dosing
level.
2. Place pre-wash detergent cycle detergent anywhere
inside the inner tank
“ ”

Cutlery with wooden, horn china or
mother-of-pearl handles
Plastic items that are not heat resistant
Older cut lery with glued parts that are not
temperature resistant
Bonded cutlery ite ms or dishes
Pewter or copper items
Crystal glass
Steel items subject to rusting
Wooden platters
Items made from synthetic fibres
Some types of glas ses can become
dull after a large number of washes
Silver and aluminum parts have a
tendency to discolour during washing
Glazed patterns may fade if machine
washed frequently
Are not suitable Are of limited suitability
Dishes and items of cutlery must not lie inside one another, or cover each other.
T
The upper basket is designed to ho ld more delicate and lighter dishware such as glasses , coffee
and tea cups
Long bladed knives stored in an upright position are a potential hazard!
Long and/or sharp item s o f cutlery such as carving knives must be positioned
horizontally in the upper basket.
Please do not overload your dishwasher. T his is important for good results and for
reasonab le consumption of energy.
o avoid damage, glasses sh ould not touch one another.
Load large a nd diffic ult t o clean i tems in t he lower basket.
Load hollow items such as cups, glasses, pans etc. With the opening facing downwards so that
water cannot collect in the container or a deep base.
Consider buying utensils which are identified as dishwasher-proof.
Use a mild detergent that is described as 'kind to dishes'. If necessary, seek further
information from the detergent manufacturers.
For particular items, select a program with
To prevent damage, do not take glass a nd c utlery out of the dishwasher immediately
after the programme has ended.
t he lowest possible temperature.
(For best performance of the dishwasher, follow the se loading guide lines.
Features and appearance of baske ts and cutlery ba skets may vary from your model.)
Scrape off any larg e amounts o f leftover food. Soften remnants of burnt food in pans.
It is not necess ary to rinse t he d ishes under running water.
Pl ace objects in the dishwasher in following way:
1.Items such as cups, glasses, pots/pans, etc. a re faced downwards.
2.Curved items, or ones with recesses, should be loaded aslant so that water can run off.
3.All utensils are stacked securely and can not tip over.
4.All utensils are placed in the way that the spray arms can rotate freely during washing.
Very small items should not be washed in the dishwasher as they could easily fall out of the basket.
To prevent water dripping from the uppe r basket into the lower basket, we recommend that you
empty the lower basket first , followed by the upper basket.

13
For better stacking of pots and pans, the spikes can be folded
down as show on the picture below.
For better stacking of cups, the spikes can be
folde d down as shown on the picture bel ow.
The upper basket is designed t o hold m ore delicate
and lighter dishware such as glasses, coffee and
tea cups and saucers, as well as plates, small bowls
and shallow pans (as long as they are not too dirty).
Position the dishes an d co okw are so that they will
not get moved by t he spray of w ater.
Pots, serving bowls, etc, must alw ays be placed to p down.
Deep pots should be slanted to allow water to flow out.
Please be reminded that:
The Botto m Basket features folding spikes so that larger or more pots and pans can be loaded.
For a top quality cleaning, place the silverware in the basket making sure that:
They do not nest together.
Silverware is placed with the male face up.
Long utensils in the middle.
Cutlery should be placed in the cutlery basket with the handles at the b ottom. If the rack has side basket s, the
spoons should be loaded separately into t he a ppropriate s lots. Long ut ensils should especially be place d in the
horizontal position at the front of the uppe r basket .
Do not let any item extend through
bottom.
Always load sharp utensils with the
sharp pointing down!
We suggest that you place large items and the most
difficult to clea n items such as
pots, pans, lids, se rving dishes and bowls, as shown
in the figure below. It is preferable to place serving
dishes and lids on the side of the racks in order to
avoid blocking the rotation of the top spray arm.
into th e low er basket:
The height of the upper rack can be easily adjusted t o
accom modate taller dishes in either the upper and lo wer
ra ck. To raise the rack t o the up per position, lift r ack unti l
both sides are at the same height. T he r ack will secu re
in to pl ace. To lower the rack, pu sh d own on the h and le
and release.

Starting a cycle wash
Draw out the lower and upper basket, load the dishes and push them back.
It is load the lower baske t first, then the upper one (see the section entitled
Loading the Dishwasher ).
Pour in the detergent (see the section entitled Salt, Detergent and Rinse Aid ).
Insert the plug into the socket. The power supply is 220-240 VAC /50 HZ, the specification
of the socket is 10A 250VAC. Make sure that the water supply is turned on to full pressure.
Close the door, press the On/Off button to switch on the machine.
Press the program button , the wash program will be changed as follows direction:
recomme nded to
“ ”
“ ”
Intensive->Normal->ECO->90 Min Glass->Rapid ;Auto-> -> ->
If a program is select ed, t he response ligh t wi ll turn on. Th en pres s the sta rt/Pause button and the
dishwasher will start its cycle.
1
2
3
4
5
Soak
*EN 50242 : This programme is the test cycle. The information for comparability test
in accordance with EN 50242, as follows:
Capacity: 10 setting
Position Upper basket :
Rinse aid setting: 6
Pl:0.49w; Po:0.45w .
lowest position
Means: Rinse-aid dispenser needs to be filled.
( )
Normal
Rapid
Glass
3/22g
3/22 g
3/22 g
For normally soiled loads,
such as pots pl ates
glass es and lig htly
soiled pans.
、 、
For heaviest soiled crock ery,
and normally soiled pots
pans dishes etc with dried
on soiling.
、
、
A shorter wash for lightly
soiled loads and qu ick
wash.
Pre-wash(50 )
Wash (60 )
Rinse
Rinse
Rinse(70 )
Drying
℃
℃
℃
Pre-wash(45 )
Wash (55 )
Rinse
Rinse (65 )
Drying
℃
℃
℃
Pre-wash
Wash (45 )
Rinse(65 )
Drying
℃
℃
Wash (45 )
Rinse
Rinse (55 )
℃
℃
(50 )℃
180
195
170
30
1.1
0.74
1.4
0.7
15.5
12
8
10
Wash(65 )
Rinse
Rinse (65 )
Drying
℃
℃
90 11.5
1.15
25g
20g
For normally soiled loads
that need quick wash.
To rinse di shes that you plan
to wash later t hat day.
Pre-wash
150.02 3.5
3/22g
Fo r li ghtly soiled cr ockery
and glass.
125 0.75 1 2
Pre-wash
Wash (4 0 )
Rinse
Rinse(60 )
Dr ying
℃
℃
9.5~13
0.9~1.3
150
3/22g
Pre-wash (45 )
Autowas h(45-55 )
Rinse
Rinse(65 )
Drying
℃
℃
℃
Auto sensing wash, lightly,
normally or heavily soiled
crockery, with or with out
dried-on food
Intensive
90 Min
Soak
ECO
( *EN 502 42)
This is standard progr amm e, it i s
suitabl e to clean normally soiled
tableware and it i s t he m ost eff icient
pr ogramme in terms of its com bined
ener gy and water con sumpt ion for
that type of tabl ewar e.
1pie ce
1 p ie ce
1 piece
1 pie ce
1 piece
1 piece

If your model has memo ry function, and if the power is cut by accident, the machine will
continue the selected program when the power recovers.
If you open the door , the machine will pause. The program light will
stop blinking and the buzzer will mooing every minute unless you close the door . After
you close the door ,the machine will keep on working after 10 seconds.
during a wash cycle
A forgotten dish can be added any time before the detergent cup opens.
Add forgotten dishes.
Close the door
After the spray arms stop working, you can open the door
completely.
2
3
Open the door a little .
14
5
6
Press the Start/Pause Button to stop the washing.
Press the , The dishwasher will run
after 10 seconds.
Start/Pause Button
It is dangerous to open the door mid-cycle,
as hot steam may scald you.
Premise:
1
2
A run ning cyc le can only b e ch anged if it has only be en r unning for a short tim e. O therwise, the detergent
may have alr eady been re leased, and the a ppli ance ma y have already drained th e wash w ater.
If this is the case, the dete rgent dispenser must be refilled (s ee the sectio n entitle d Function of Detergent ).
“ ”
Press the Start/Pause button , the machine will pause, press the prog ram button more than 3s then you
can change the program to the d esired cycle setting (see the section entitled " Starting a washing program" ).
When you press the Start/Pause button to pause during washing, the will
stop blinking and the dishwasher will mooing every minute unless you press the
Star t/Paus e button to start.
running indicator
When the wo rking cycle has finished, the buzzer of the dishwasher will sound for 8 seconds, then stop. Turn off
the appliance usi ng the O N/O FF button, shut off the wa ter supply and open the door of the di shw asher.
Wait for a few minutes before unlo ading the dishwasher to avoi d ha ndlin g the dishes and utensils while th ey
are still hot and m ore susceptible to break . They will also dry be tter.
Switching Off the Dishwasher
The program light is on but is not blinking, only in this case has the program en ded.
1.Open the door.Switch off the dishwasher by pressing the ON/OFF button.
2.Turn off the water tap!
Open the door carefully.
Hot dishes are sensitive to minutes before removing from
the appliance.
Open the dishwasher's door, leave it ajar and wait a few minutes before removing the dishes. In this way they
will be cooler and the drying will be improved.
shocks. The dishe s should cool down for around 15
Unloading the dishwasher
Empty the lower basket first and then the upper one. This will avoid water dripping from the upper Basket onto
the dishes in the lower one.
It is normal for the dishwasher to be wet inside.

The filter prevents larger remnants of food or other objects from getting insi de the pump.
The residues may block the filter, in this case they must be removed.
The filter system consists of a coar se filter,a flat (Main filter)
And a microfilt er(Fine filter).
Fo od and soil particles trapped in this filter are pulverize d by a
special jet on the lower spray arm and washed down the drain.
La rger items, such as p ieces of bon es o r glass, that could block
the drain are trapped in the coarse filter. To remove the items
caught by the filter, gently squeeze the tap on th e top of this
fil ter and lift out.
This filter holds soil and food residues in the sump a rea a nd
pr eve nts the m fr om being red eposited on the dish es d uring wash cycle.
Main filter
1
Coarse filter
2
Fine filter
3
2
3
1
Filter assembly
The filter efficiently
For best performance and results, the filter must be cleaned re gularly. this reason, it is a goo d idea to
remove the larger food particles trapp ed in the filter after each was h cy cle by rinsing the sem icircular filter and
cup under running water. To remove the fil ter device, pull the cup handle in the upward d irection.
re moves food particles from the wa sh water, allowing it to be recycled during the cycle.
For
The dishwasher m ust never be used without the filters.
Impro per replacement of the filter may reduce the perform ance level of the appliance
and damage dishes and utensils.
Step 1 Turn the：filter counterclockwise,
Step 2 lift the filter assy up：
When following this procedure from step1 to step 2, the filter system will be removed;
when following it from Step 2 to Step 1, the filter system will be installed.
1
2

The control panel can be clea ned by using a lightly dampened cloth.
After cleaning, make sure to dry it thoroughly.
For the exter ior, use a good appliance polish wax.
Never use sharp objects, scouring pads or har sh cleaners on a ny part of the dishwasher.
Winterzing
1 .Cut off the electrical power to the dishwasher at the supply source.
2. Turn off the water supply and disconnect the water inlet pipe from the water valve.
3. Drain the water from the inlet pipe and water valve. (Use a pan to gather the water)
4. Reconnect the water inlet pipe to the water valve.
5. Remove the filter at the bottom of the tub and use a sponge to soak up water in the sump.
please take frost protection measures on the dishwasher in winter. Every fter washing cycles,
please operate as follows
time a
：
Cleaning the Filter
Cleaning the Door
To clean the coarse filter and the fine filt er, u se a clea ning brush. Rea ssemble the filter parts (see page 16) and
reinsert them in the dish was her, pos ition ing them in t heir sea t and pressing downwards.
When cleaning the filters, Otherwise, the filters could be
contorted and the performance of the dishwasher could be decreased.
do not knock them.
To clean the edge around the door, you
To avoid penetration of water into the door lock and electrical components, do not
use a spray cleaner of any kind.
sh ould only use a soft, ward and damp
cloth.
Never u se a spray cleaner to clean the door panel as it may dam age the door lock
and electrical components.
Abrasive agents or some paper towels should not be used because of the risk of
scratching or leaving spots on the stainless steel surface.
Cleaning the Spray Arms
If your dishwasher cannot work because of the ice,
please contact professional service persons.
It is necessary to clean the spray arms regularly for hard
water che micals will clog the sp ray arm jets and bearings.
-After each cycle, check for any debris i n the filter to avo id future blockage.
-By unscrewing the coarse fi lter, you can remove the filter system. Remove any foo d remnants and
clean the filters under runni ng water.
Remarks:
The entire filter assembly should be cleaned once a week.
To remove th e lower spray arm, pull out the spray arm upwa rd.
To remove the upper spray arm, hold the nut, rotate the arm
clockwise to remove it.
Wash the arms in soapy and warm water and use a soft brush to
clean the jets. Replace them after rinsing them thoroughly.

It is recommend that you run a wash cy cle with the
dishwasher empt y an d then remove the plug from the
socket, turn off the water supply and leave the door of
the appliance slightly open. This will help the d oor
seals to last l onger and pr event odours from forming
within the appliance.
If the appliance must be moved, tr y to keep it in the
vertical position. If absolutely necessary, it can be
positioned on its back.
One of the factors that cause odours to form in the
dishwasher n the seals.
Periodic cleaning with a damp sponge will prevent this
from occurring.
is r ema inin g fo od strapped i
Before cleaning or performing maintenance, always
remove the plug from the socket.
To clean the e xterior and r ubber parts of the dishw asher,
do not use solvents or abrasive cleaning products.
Only use a clo th with warm soapy water.
To remove spots o r stains from the surface of the
interior, use a cloth da mpened with water a n a little
vinegar, or a cleaning pro duct made specifically for
dishw ashers.
Remove the Plug
No Solvents or Abrasive Cleaning
Moving the Appliance
Seals
After every wash, turn off t he water supply to the
appliance and leave the door slightly open so that
moisture and odours are not tra pped inside.
After Every Wash
When not in use for a long time
The installation positi on of dishwasher sho uld be ne ar the existing in let and drain hoses and power co rd.
One side of the cabinet sink should be chosen to facilitate the connection of drain hoses of the dishwasher.
Installation preparation
Note: please check the accompanying installation acce ssories(hook for aesthetic panel,screw)
●
Th e installation of the pipes
and electrical equipments
should be done by professionals .
Electrical Shock Hazard.Disconnect electrical power
beforeinstalling dishwasher.
Failure to do so can result in death or electrical shock.