DeDietrich DVH1344W User manual

DVH1344W
EN INSTRUCTION MANUAL
DVH1344B
DVH1344X

Reviewing the section on troubleshooting Tips will help
you solve some common problems by yourself.
Dea r Customer,
Please carefully read th is manual before using the
dishwa sher, it will help you use and maintain the
dishwa sher pro perly.
Pass i t on t o any subseq uen t ow ner of the app liance.
This manual contains se ctions on safety Instructi ons,
Op era ting I nstr uctio ns, Inst all at ion I nstru ctio ns a nd
Tr oubl esho otin g Tip s, et c.
The man ufacture r, following a pol icy of con stant
dev elopment and updating of the product, may
make m odifications witho ut giving prior notice.
If lost or out-of-date, you can receive a new user
manual from the manufacturer or responsible
vendor.
Keep this man ual for future ref erence.
If you cannot solve the problems by yourself,
please ask for help from a professional technician.
Dishwasher Features.................................... ........6
A Wa ter So fte ner.... .... .... ..... .... .... ..... .... .... ..... .... .7、
................................... ............... 12
R ecommend at ions fo r l oad ing and unl oading
the dishwasher
Filter System..................... ........................ ..........16
Caring for the Dishwasher..................... ..............17.
B Loading th e Salt into the Soft ener............... .......8、
C Filling the Rinse Aid Dispenser......................... 8、
D Function of Detergent ......................................9、
Loading the upper ....... .............................13Basket
Loading the Lower ....................................13Basket
Wash Cycle Table..... ..... ................... ...................14
Turning on the Appliance............................... ......14
... ..... ..................15
Changing the Program m id-cyc le
At the end o f th e Wash Cycle................. ...............15
Before calling for service............. .... .......... .......... 25.
Error codes.................................... ...................26.
Technical information.............................. ..........27..
Control Panel.. .......................... .... ....................... .6
Inst allation preparation.......... ........................ .....18
........19Aesthetic panel's dimensions and installation
Tension adjustment of the door spring ...................21
Connection of drain hoses...... ........................ .....21
Dishwasher installation steps...... ................... .....22
Ab out Ele ctricit y C on nec ting.... ......... ..... ......... ... ..2 3
C old Wat er Co nne cti on. ...... .... ..... .... .. ... ......... .. ... 24

1
This appliance is intended to be used in household
and similar applications such as:
-staff kitchen areas in shops, offices and other
working environments;
-farm houses;
-by clients in hotels, motels and other residential type
environments;
-bed and breakfast type environments.
This appliance can be used by children aged from 8
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision
or instruction concerning use of the appliance in a
safe way and understand the hazards involved.
Children shall not play with the appliance. Cleaning
and user maintenance shall not be done by children
without supervision.(For EN60335-1)
Packaging material could be dangerous for children!
This appliance is for indoor household use only.
To protect against the risk of electrical shock,
do not immerse the unit, cord or plug in water or
other liquid.
Please unplug before cleaning and performing
maintenance on the appliance.
Use a soft cloth moistened with mild soap, and then
use a dry cloth to wipe it again.
When using your dishwasher,
follow the precautions listed below:

2
This appliance must be earthed. In the event of a
malfunction or breakdown, earthing will reduce the
risk of an electric shock by providing a path of least
resistance of electric current. This appliance is
equipped with an earthing conductor plug.
The plug must be plugged into an appropriate outlet
that is installed and earthed in accordance with all
local codes and ordinances.
Improper connection of the equipment-earthing
conductor can result in the risk of an electric shock.
Check with a qualified electrician or service
representative if you are in doubt whether the
appliance is properly grounded.
Do not modify the plug provided with the appliance;
If it does not fit the outlet.
Have a proper outlet installed by a qualified electrician.
Do not abuse, sit on, or stand on the door or dish
rack of the dishwasher.
Do not operate your dishwasher unless all enclosure
panels are properly in place.
Open the door very carefully if the dishwasher is
operating, there is a risk of water squirting out.
Do not place any heavy objects on or stand on the door
when it is open. The appliance could tip forward.
When loading items to be washed:
1) Locate sharp items so that they are not likely to
damage the door seal;

3
2) Warning: Knives and other utensils with sharp points
must be loaded in the basket with their points
down or placed in a horizontal position.
Check that the detergent powder is empty after
completion of the wash cycle.
Do not wash plastic items unless they are marked
dishwasher safe or the equivalent.
For check the
manufacturer's recommendations.
Use only detergent and rinse agents recommended for
use in an automatic dishwasher.
The door should not be left open, since this could increase
the risk of tripping.
If the supply cord is damaged, it must be replaced by the
manufacturer or its service agent or a similarly qualified
person in order to avoid a hazard.
During installation, the power supply must not be
excessively or dangerously bent or flattened.
Do not tamper with controls.
The maximum number of place settings to be washed
is 13.
The maximum permissible inlet water pressure is 1MPa.
The minimum permissible inlet water pressure is 0.04MPa.
facing
“ ”
unmarked plastic items not so marked,
Never use soap, laundry detergent, or hand washing
detergent in your dishwasher.
The appliance needs to be connected to the main water
valve using new hose sets. Old sets should not be reused.

4
This appliance's packaging materials are recyclable.
Dispose of the packaging into a suitable waste
collection container to recycle it.
It is prohibited to dispose of this appliance as
household waste.
Correct Disposal of this product: this symbol on the
product or in its packing indicates that this product
may not be treated as household waste. Instead,
it should be taken to the appropriate waste collection
point for the recycling of electrical and electronic
equipment. By ensuring this product is disposed of
correctly, you will help prevent potential negative
consequences for the environment and human health,
which could otherwise be caused by the inappropriate
waste handling of this product.
For more detailed information about the recycling of
this product, please contact your local council your
household waste disposal service, or the shop where
you purchased the product.
For disposing of package and the appliance please
go to a recycling centre. Therefore cut off the power
supply cable and make the door closing device
unusable.
Cardboard packaging is manufactured from recycled
paper and should be disposed in the waste paper
collection for recycling.
By ensuring this product is disposed of correctly, you
will help prevent potential negative consequences
for the environment and human health, which could
otherwise be caused by inappropriate waste handling
of this product.
For more detailed information about recycling of this
product, please contact your local city office and your
household waste disposal service.
DISPOSAL: Do not dispose this product as unsorted
municipal waste. Collection of such waste separately
for special treatment is necessary.

5
For detailed operating method read the corresponding conte nt on the instruction manual.
For each wash cycle.
For programs with pre-wash,please put the detergent anywhere inside the
inner tank except in compartment A
(Follow the user instructions!)
Electric indicator on control panel (if provided).
Check the rinse aid level
(On models with water softener system only.)
Electric indicator on control panel (if provided).
If there is no salt warning light in the control panel
(for some models), you can estimate when to fill the salt into
the softener by the number of cycles the dishwasher has run.
Check the regeneration
salt level
Load the baskets
Select a programme
Running the dishwasher
Switch off the appliance
Turn off the water tap,
unload the baskets
Fill the detergent dispenser
Warning: wait a few m inutes (abou t 15 m inutes ) before unlo ading the dishwas her to avoid
han dling the dishes an d utensils w hile they are still hot and more susceptible t o brea k.
The dishe s will also dry better. Firs t start unloading the lower bask et.
Changing the programme
Adding fo rgotte n di shes
in t he dis hwash er.
To load the baskets, ref er to th e sect ion en titled ." Prepa ring an d Loa ding Dishes"
Touch the P rogra mme Button until the selected p rogram me li ghts u p.
( See the section entitle d Op eration instr uction )“ ”
If the appliance is switched
off during a wash cycle.
Open the do o r care fu lly.
Look out for hot ste am
when openin g the door!
If the appliance is switched off during a wash cycle, when switched
on again, please re-select the washing cycle and operate the dishwasher
according to the original Power-on state ).
Switch on the appliance Open the door, the On/Off button to switch on the appliance .
touch
1.Open the door a little to stop the dishwasher.
2.After the spray arms stop working, you can open the door completely.
3.Add the forgotten dishes.
4.Close the door, the dishwasher will start running again .
When the working cycle has finished, the buzzer of the dishwasher will sound 8 times, then stop.
Turn off the appliance using the On/Off Button.
Since the appliance is standing by, it will power off automaticly after 30 minutes without any operation.
1. A running cycle can only be modified if it has been running for a short time. Otherwise the detergent
may have already been released and the water already drained. If this is the case, the detergent
dispenser must be refilled.
2. the start/pause button to stop the washing, press the for more than 3
seconds to cancel the running programme.
3. Select a new programme.
4. Restart the dishwasher.
Programme Button
Touch
Tu rn on the wate r tap a nd pre ss the Start/Pause Butto n. The ma ch ine wi ll start worki ng a fte r
abou t 10 seconds.

9
1
2
3
4
5
6
7
8
10
before using it for the first time.
To get the best performance from your dishwasher, read all operating instructions
1.On/Off Button: To turn on/ off the power supply.
3.Delay Button s :
2.Program Button : the button to s elect a
wash Program.
Touch
7.Di spl ay s creen: to show the ti me
and the stat e(runn ing state, de lay time etc )
remai ning
Back Vi ew
Front view
Dispenser
Cup Shelf
Spray arms
Filter assembly
Inlet pipe connector
Drain pipe
Low er Basket
Inner pipe
Upper Basket
1Salt Container
5
6
7
8
9
10
3
2
4
Increase
Decrease
4.Half lo ad button:Du al zone wash fun ctio n. Touch the
button to select eith er upper basket or lo wer basket l oad.
The co rresponding resp ons e indica tor will light.
5. F unction Button : the button to select a
function,and the response indicator will blinking,
only one function can be selected in one cycle.
Touch
6.Start /Pause button: To start the sel ected
washin g pro gram or p ause the washing progr am
when the machine is w orking.
Upper basket
Lower basket
Extra Drying, to improve drying efficiency.
Strong Wash, to improve cleaning efficiency.
Express, to reduce .program duration
Faucet is not open
Rinse detergent need to be refilled
Salt need to be refilled
Glas s
90Mi n
Rapid
Auto
Intensive
Normal
ECO
6

The water softener must be set manually, using the water hard ness dial.
The wat er softener is des igned to rem ove minerals and salts from the water, which woul d have
a detrim ental or adverse effect on the operation of the app liance.
The mor e mi nerals there are, the harder your water is
The softener sho uld be adjusted according to the hardness of the water in your area. Your local Water Author ity
can advise you on the hardness o f the water in your area.
Adjusting Salt Consumption
The dishwasher is designed to allow for adjustment in the amount of sa lt consumed bas ed on the hardness of
the water used. This is intended to optimise and customise the level o f salt consumption.
1.
2. Touch the button for more than 5 se conds to start the water softener
setting mode within 60seconds after the appliance was switched on(Salt and
Rinse aid war ning lights will be on periodically );
3. the button to select the proper set according to ,
4. To end the setting mode, either touch the On/Off button or wait 5 sec onds
Start/pause
Touch Start/Pause
th e setting wi ll change in t he following sequence: H1->H2->H3->H4->H5->H6->H1;
Wi th th e do or close d, switch on the appliance;
seeting mode is on
the hardness of your local water
WATER SOFTENER
The hardness of the wa ter varie s from place to plac e. If hard water is used in the dishwasher, de posits will
form on the dish es and utensils.
The applian ce is equipped with a special softener that uses a salt container specifically des igned to eliminate
lime and minera ls from the water.
Contact your local water board for information on the hardness of your water supply.
H1
H2
H3
H4
Please follo w the steps below for adjustm ent in salt consumption.
7
If your model does not have any water softener, you may skip this section.
H5
H6
The manufactory setting: H3 (EN 50242)
Before using you r dishwasher for the first time :
A. Set the water softener
B. Add 1.5Kg dishw asher salt and then full fill the salt con tainer with w ater
C. Fill the rinse aid dispenser
D. Fill in detergent
Clark: British degree
fH: French degree
dH: German degree
dH=1.25 Clarke=1.78 fH=0.178mmol/l
1
dH mmol/l
0~90~5 0~0.94 0
10-20 6-11 1.0-2.0 9
21-3012-17 2.1 -3.0 12
20
fH
0~6
7-14
15-21
Clarke
WATER HARDNESS
Sel ector Posit ion Salt con sumption
(gram/cycle)
18-22 31-40 22-28 3.1-4.0
41-6023-34 4.1 -6.0 30
60
29-42
35-55 61-98 43-69 6.1-9.8

1. The salt container must only be refilled when the salt warning light in the control panel comes on.
Depending on how well the salt dissolve s, the salt warning light may still be on even though the
salt container is filled.
If there is no salt warning light in the con trol panel (for some Mode ls),you can estim ate when to fill
the salt into the softener by the cycles that the dishwasher has run.
2. I f salt has spilled, run a soak or qu ick prog ram to r emove it.
Always use the salt intended for dishwasher use.
The salt contain er is located beneath the lower basket and should be filled as explained
in the foll owing:
Warning!
Only use salt spe cifically designe d for dishwa shers use! Every other type o f
salt not specifically desig ned fo r dishwasher use, e specially table salt, wil l
damage the w ater sof tener. I n case of damages caused by the use of unsuitable
salt the ma nufacturer does not give any wa rranty no r is liable for any damages caused.
Only fil l wi th salt befo re running a cycl e.
This will prevent any g rains of salt or salty wate r, which may have been spilled,
remaining on the bottom of the machi ne for any period of time, which may cause
corrosion.
8
Rinse Aid Dispenser
Function of Rinse Aid
Rinse aid is automatically added during the last rinse, ensur ing thorough rinsing, a s pot and strea k free drying.
Warning!
Only use branded rinse aid for dishwasher. Never fill the rinse aid dis penser with any o ther substances
(e.g. Dishwasher cleaning agent, liquid detergent). Th is would damage the app liance.
with wate r, It is normal for a small amount of wate r to
come out of the salt container.
Fill the salt contai ne r to its maximum li mit
AAfter the lower basket has been removed, unscrew and remove the cap from the salt container.
BPlace the end of the funnel (supplied) into the hole and introduce about 1.5kg of di shwasher salt.
C
DAfter fil ling the container , screw back the cap tightly.
EThe sal t warning ligh t will stop being after th e sa lt co ntain er has be en fill ed with sa lt.
FImm ediat ely aft er filling the salt into the salt container, a washing program should be started
program Other wise the filter system, pump or ot her important parts of the machine may be damaged
by salty water. This is out of warranty.
(We su ggest to use a short
).
The rinse aid is released during the final rinse to prevent wa ter from formi ng droplets on your di shes, which can
leave spots and streaks. It also improves drying by allowing water to roll off the dish es. Your dishwasher is
designed to use liquid rinse aids. Th e rinse aid dispenser is located insid e, on the door and next to the detergent
dispenser.
To fill the dispe nser, open the cap and pou r the rinse aid into the dispenser until the level indicator turns comple tely
black. The volume of t he rinse aid c ontainer is about 110ml.

9
To open the dispenser, turn the cap to the "open" (left) arrow and lift it out.
Careful ly pour in the r inse-aid in to its dispenser, whil st avoiding it to overf lo w.
Replace the cap by inserting it aligned with "open " arrow and turning it to the closed (right) arrow.
Adjusting Rinse Aid Dispenser
The rinse aid dispenser has six or fou r setting s. Always st art with the dispenser
set on "4". If spot s and p oo r drying are a problem, increase the amount of rinse
aid dispensed by removing the dispenser lid and rotating the dial to "5". If the
dishes still are not drying properly o r show spots, adjust the dial t o the next
high er lever until your dishes are sp ot-free. The recom men ded setting is "4".
(Factory value is "4".)
Increase the dose if there are drops of water o r lime spots on the di shes afte r washing.
Redu ce it if th ere are stick y whitis h stains on your dish es o r a bluish film on glass ware or
knife blad es .
1
2
3
As the rinse aid diminishes, the size of the black dot
on the rinse aid leve l indicator changes, as illustra ted b elow.
Full
3 / 4 full
1 / 2 full
1 / 4 full - Should refill to eliminate spotting
Empty
When to Refill the Rinse Aid Dispenser
Unless the rinse-aid warning light on the control panel is on, you can always esti mate the am ount from the color
of the optical level indicator "C "located nex t to the c ap. When th e rinse-aid c ontainer is f ull, the indicator
will be fully dark. The size o f the dar k dot de creases as t he ri nse -aid diminishes. You sho uld never let
the rinse aid level be less than 1/4 full.
during the next wash. Don't forget to re place the cap before you close dis hwa sher door.
Clean up any rinse aid spilled while during fillin g with an absorbent cloth to avoid excess ive foaming
The chem ical ingredients that compose the detergent are necessary to remove, crush and dispense all dirt out of the
di sh was he r. Most of the commercial quality detergents are suitable for this purpose.
" "
Proper Use of Detergent
Use only detergent specifically m ade for the use in dishwashers. Keep your detergent fresh and dry.
Don't put powdered detergent into the dispenser u ntil you're re ady to wash dishes.
Warning!

10
Amount of Detergent to Use
Dishwasher detergent is corrosive!
Take care to keep it out of reach of children.
Based on their chemical com position, deterge nts can be split in two basic types:
Dete rgent tablets of diffe rent brands disso lve at different speeds. For this reason some
detergent tablets cannot dissolve and develop the ir full cleaning power dur ing short
prog rams. Therefore please use l ong programs wh en using deterg ent tablets, t o
ensure the complete removal of detergent residuals.
The dispenser must be refilled before the start of each wash cycle f ollowing the instructions
provided in t he wash cycle table . Your dis hwa sher uses less de tergent and rinse aid than
Conventiona l dis hwasher. Generally, only one tablespoon of detergent is needed for
a normal wash load. More heavily soiled it ems need more detergent. Al way s ad d the
detergent just be fore starting the dishwas her, otherwise it could get damp and w ill not
dissolve properly.
Concentrated Detergent
Detergent Tablets
Detergent Dispenser
co nventional, alkaline dete rgents with caus tic components
low alkalin e co ncentrated detergen ts with n atural enzym es
Normally new pulver ised detergent is with out phosphate. T hus the water softener function of
phospha te is not given. In this case we recommend to fill salt in the salt con taine r even w hen
the hardness of water is only 6 dH. If dete rgents witho ut phosphate are used in the case of hard water
often white spots appear on d ishes and glasses. In this case pl ease add more deter gent to reach
bett er results. Detergent s without ch lorine do only bleach a little. S trong and coloured spots wil l not
be removed completely. In this case please choose a program with a higher temperature.
°
Detergents
There are 3 sorts of detergents
1.With phos phate and with chlorine
2.With phosphate and without chlorine
3.Withou t phosphate and without chlorine
Always add the detergent just before starting each wash cycle.
Only use branded detergent aid for dishwasher.
If the lid is closed: press release button. T he lid will spring open.
Detergent powder

11
Fill the detergent dispenser with detergen t.
The marking indicates the dosing levels , as
Illustrate d :on the right
Plea se o bserve the manufacturer s do sing and stor age
Recommendations as stated on the detergent packaging.
Close the lid and press on it until it locks into place.
If the dishes are heav ily soiled , add an additional prewash detergent dose.
This detergent will take effect during the pre-wash phase.
Filling the detergent dispenser
You inform ation about the amount of detergent for th e single program me on page 14.
will f ind
Be aware that depending on th e so iling of wate r, se tting ma y be diffe ren t.
Please observe the manufacturer's recommendations on the detergent packaging.
1. Place the main washing cycle deter gent in the storage
compartment indicated with an A on the picture.
Th e marking on the compar tment indica tes t he dosing
level.
2. Place pre-wash detergent cycle detergent anywhere
inside the inner tank
“ ”

12
Cutlery with wooden, horn china or
mother-of-pearl handles
Plast ic ite ms that are not heat resistant
Older cut lery with glued parts that are not
temperature resistant
Bonded cutler y items or dishes
Pewter or cooper items
Crystal glass
Steel items subject to rusting
Wooden platters
Items made from synthetic fibres
Some types of glasses can become
dull after a large number of washes
Silver and aluminum parts have a
tendency to discolour during washing
Glazed patterns may fade if machine
washed frequently
Are not suitable Are of limited suitability
Dishes and items of cutlery must not lie inside one another, or cover each oth er.
The upper basket is designed to ho ld more deli cate and lighter dishware such as glas ses , coffee
and tea cups
Long bladed knives stored in an upright position are a potential haza rd!
Long and/or sharp items o f cut lery such as carving knives must be positioned
horizontally in the upper basket.
Please do not ove rload your dishwasher. T his is important for good results and for
reasonab le consumption of energy.
To avoid damage , glasses should not touc h on e an other.
Load lar ge and difficult to clean it ems in the lower basket.
Load hollow items suc h as cups, gl asses, pans etc. With the opening facing downwards so that
water can not collect in the container or a deep b ase.
Consider buying utensils which are identified as dishwasher-proof.
Use a mild detergent that is described as 'kind to dishes'. If necessary, seek further
information from the detergent manufacturers.
For particular items, select a program with
To prevent damage, do not take gla ss a nd c utlery out of the dishwasher immediately
after the programme has ended.
t he lowest possible temperature.
(For best performance of the dishwasher, follow the se loading guide lines.
Features and appearance of baskets and cutlery baskets may vary from your model.)
Scrape off any larg e amounts of leftover food. Soften remnants of burnt food in pans.
It is not necess ary to rinse the dishes under running water.
Place objects in the dishwasher in following way:
1.Items such as cups, glasses, pots /pans, etc. a re faced downwards.
2.Curved items, or ones with recesses, should be loaded aslant so th at water can run off.
3.All utensils are stacked securely and can not tip over.
4.All utensils are placed in the way that the spray arms can rotate freely during washing.
Very sm all items should not be washed in the dishwasher as they could easily fall out of the basket.
To prevent water dripping fr om the upper basket into the lower basket, we recommend that you
empty the lower bask et first, fo llowed b y the upper basket.

13
For better stacking of pots and pans, the spikes can be folded
down as show on the picture below.
The upper basket is designed to hold m ore delicate
and lighter dishware such as glasses, coffee and
tea cups and saucers, as well as pl ates, small bowls
and shallow pans (as long as they are not too dirty).
Position the dishe s an d co okw are so that they will
not get moved by t he spray of w ater.
Pots, serving bowls, etc, must alw ays be placed to p down.
Deep pots should be slan ted to allow water to flow out.
Please be reminded that:
The Botto m Basket features fo lding spikes so that larger or more pots and pans can be loade d.
They do not nest together.
Silverware is placed with the male face up.
Long utensils in the middle.
Cutlery should be placed in the cut lery basket with the handles at the bottom. If the rack has side baskets, the
spoons should be loaded separately into the appropriate slots, utensils should be placed in the
horizontal position at the front of the upper basket .
Especially long
Do not let any item extend through the bottom.
Always load sharp utensils with the sharp point down!
The height of th e upper rack can be easi ly ad just ed to
accommodate t aller dishes in ei ther the uppe r an d lo wer
rack. To rai se th e ra ck t o the upper p osition, lift rack until
both sides are at the same h eigh t. The rack will secure
into pla ce. To lo wer the rack , pu sh d own on the handl e
and release.
For better stacking o f cups, th e sh elves can be fold ed
down as show on the picture belo w.
We suggest that you place large items and the most
difficult to clean items such as
pots, pans, lids, serving dishes and bowls, as shown
in the figure below. It is preferable to place serving
dishes and lids on the side of the racks in order to
avoid blocking the rotation of the top spray arm.
into the lower bask et:
For a top quality cleaning, place the silverware in the basket making sure th at:

Rapid
90 Min
Glass
Normal
Int ensive
14
*E N 50242 : This p rogramme i s the test cycle. T he information for comparability test
in accord ance with EN 50242, as follow s:
Capacity: 13 setting
Position Upp er basket:
Rinse ai d setting: 6
Pl:0.49w; Po:0.45w.
lower position
Means: need to fill rinse into the Rinse-Aid Dispenser.
( )
(* EN 5024 2)
For nor mal ly so il ed loads,
such as pots plates
glasses and lightly
soiled pans.
、 、
For heaviest soiled crockery,
and normally soiled pots
pans dishes etc with dried
on soiling.
、
、
A shorter wash for lightly
soiled loads and qui ck
wash.
Pre-wash(50 )
Wash (60 )
Rin se
Rin se
Rin se(70 )
Drying
℃
℃
℃
Pre-wash(45 )
Was h (55 )
Rinse
Rinse (65 )
Drying
℃
℃
℃
Wash (45 )
Dr ying
Pr e-w ash
Ri nse(55 )
℃
℃
Wash (45 )
Rinse
Rinse (55 )
℃
℃
(50 )℃
185
195
175
30
1.3
0.93
1.6
0.75
17. 5
13.5
10
11
(65 )
Wash
Rinse (65 )
Drying
Pre-wash
℃
℃
90 12.51.35
For lightly soiled crockery
and gl ass.
130 0.9 13
Wash (40 )
Rinse
Drying
Pre-wash
Rinse(60 )
℃
℃
Auto sensing wash, l ightly,
normal ly or heavil y soiled
crockery, with or wi th out
dried-on food
Pre-wash (45 )
Autowash(45-55 )
Rinse
Rinse (65 )
Drying
℃
℃
℃
150
0 .9 ~1.3 11~1 5
This is standard programm e,
it is suitable to clean nor mally
soil ed t ab leware a nd it is the
most effi cient programme in
terms o f it s c ombined ene rgy
and water cons umption for
that type of tableware.
For normally soiled loads
that need quick wash.
Auto
5/30g
1or2 pieces
5/30g
1or2 pi eces
5/30g
1or2 pieces
35g
1 piece
25g
5/30g
1 piece
5/30g
1or2 pi eces
Starting a cycle wash
Draw out the lower and upper basket, load the dish es a nd push the m back.
It is commended to load the lower basket first, then the upper one (see t he secti on entitled
Loading the Di shw ashe r ).
Pour in the d etergent (se e the section entitled ).
Inse rt the pl ug in to the socket. The power supply is 220-240 VAC /50 HZ, the sp ecificatio n
of the socket is 1 0A 250VAC. Make sure that the water supply is turned on to full pre ssure.
Close the do or, press the On/Off button to switch on the machine.
Press the progra m button , th e wash program will be ch anged as follows dir ection:
If a pro gram is selected, the resp onse light will light on . Th en press the Start/Pause button, the
dish washer
“ ”
“ ”
Auto Intensive->Normal->ECO->Glass ->Rapid;-> ->90 min
1
2
3
4
5
Prior to first tim e us e
will start its cycle.

15
A forgotten dish can be added any time before the detergent cup opens.
Add forgotten dishes.
Close the door
After the spray arms stop working, you can open the door
completely.
2
3
Open the door a little .
14
5The dishwasher will start running again.
It is dangerous to open the door mid-cycle,
as hot steam may scald you.
When the wo rking cycle has fi nished, the buzzer of the dishwasher will soun d for 8 seconds, then stop. Turn off
the appliance using the ON/OFF button, shut off the wa ter supply and open the door of the di shw ashe r.
Wait for a few minutes bef ore unlo ading th e dishwasher to avoid handlin g the dishes and utensils while th ey
are still hot and more susceptible to break . They will also dr y be tter.
Open the door carefully.
Hot dishes are sensitive to minutes before removing from
the appliance.
Open the dishwasher's door, leave it ajar and wait a few minutes before removing the dishes. In this way they
will be cooler and the drying will be improved.
shocks. The dishes should cool down for around 15
Unloading the dishwasher
Empty the lower basket first and then the upper one. This will avoid water dripping from the upper Basket onto
the dishes in the lower one.
It is normal for the dishw asher to be wet insid e.
Switching Off the Dishwasher
The program light is on but i s not blin kin g, only in this case has the programme ended.
1.Switch off the dishwasher by p ressing the ON/OFF button.
2.Turn off the water tap!
Premise:
1 A running cycle can only be changed if it has on ly been running for a short time. Otherwise, the detergent may
have already been released, and the appli ance may have already drained the wash w ater. If this is the case,
the detergent disp enser must be refilled (see the section entitled F ).
2 Press the start/pause to stop the washing, press the Program button ,
the machine will be in standby state, then you can change the program to the desired cycle setting
(see the secti on entitled " S tarting a washing program ).
more than 3 seconds
"
illing the dete regent dispenser
If you open the door , the machine will pause. The colon in the
display blinking and the buzzer will every minute unless you close the door .
After you close the door ,the machine will keep on working after 10 se conds .
during a wash cyc le
will stop sound

The filter prevents lar ger remnants of food or other objects from getting inside th e pump.
The residues may block the filter, in this case t hey must be rem oved .
The fi lter system consists of a coarse filter,a flat (Main f ilter)
And a microfilter(Fine filter).
Fo od and soil particles trap ped in this filter are pulverized by a
special jet on the l ower spray arm and w ashed d own drain.
La rger items, such as pieces of bon es o r glass, that could block
the drain are trapped in the coarse filter. To remove the i tems
caught by the filter, gently sque eze the tap on th e top of this
filter and l ift out.
This filter holds soil and food residues in the sum p a rea a nd
preve nts the m fr om being red epo sited on the dishes d uring wash cycle.
Main filter
1
Coarse filter
2
Fin e filter
3
2
3
1
Filter assembly
The filter effi ciently
For best performance and results, the filter must be cleaned re gularly. this reason, it is a goo d idea to
remove the larger food particles trapp ed in the filter aft er each was h cycle by rinsing the sem icircular filte r and
cup under runnin g water. To remove th e filter device, pull the cup handle in the upward direction.
remo ves food particle s from the wash water, allowing it to be rec ycle d during the cycle.
For
The dishw ash er m ust never b e used without the filters.
Impro per replacement of the filter may reduce the performance level of the appliance
and damage dishes and utensils.
Step 1 Turn the：filter counterclockwise,
Step 2 lift the filter assy up：
When following this procedure from step1 to step 2, the filter system will be removed;
when following it from Step 2 to Step 1, the filter system will be installed.
16
1
2

17
The control panel can be clea ned by using a lightly dampened cloth.
After cleaning, m ake sure to dry it thoroug hly.
For the exterior, use a good appliance pol ish w ax.
Never use sharp objects, scouring pads or harsh cleaners on a ny part of the dishwasher.
Winterzing
1 .Cut off the electrical power to the dishwasher at the supply source.
2. Turn off the water supply and disconnect the water inlet pipe from the water valve.
3. Drain the water from the inlet pipe and water valve. (Use a pan to gather the water)
4. Reconnect the water inlet pipe to the water valve.
5. Remov e the filt er at the bottom of the tub and use a sponge to soak up water in the sump.
please take frost protection measures on the dishwasher in winter. Every fter washing cycles,
please operate as follows
time a
：
Cleaning the Filter
Cleaning The Door
To clea n the coarse filte r and the fine filt er, u se a cleaning brush. Rea ssemble the filte r parts (see page 16) and
rei nsert the m in the dish was her, pos itioning them in their seat and pressing downw ards.
When cleaning the filters, Otherwise, the filters could be
contorted and the performance of the dishw asher could be decreased.
do not knock the m.
To cle an the edge around the door, you
To avoid pene tration of water into the door lock and electrical components, do not
use a spray cleaner of any kind.
sh ould only use a s oft, ward and damp
cloth.
Never use a spray cleaner to clean the door panel as it may damage the door loc k
and electrical components.
Abrasive ag ents or som e paper towels shou ld not be used becau se of the risk of
scratching or leaving spots on the stainless steel surface.
Cleaning the Spray Arms
If your dishwasher cannot work because of the ice,
please contact professional service persons.
It is necessary to clean the spra y arms re gularly fo r hard
wate r che micals w ill clog the sp ray arm jets and bearings.
- After each cycle, check for any debris in the filter to avoid fut ure block age.
- By unscrewing the coarse filter, you can rem ove the filter system . Re move any foo d remna nts and
clean the filters under running water.
Remarks:
The entire filter assembly should be cleaned once a week.
To remove th e lower spray arm, pull out the spr ay arm upward.
To remove the up per spray arm, hold the nut, rotate the arm
clockwise to r emove it.
Wash the arms in soapy and warm water and use a soft brush to
clean the jets. Replace them after rinsing them thoroughly.

It is recommend that you run a was h cy cle with the
dishwasher empty and then remove the plug from the
sock et, turn off the water supp ly and leave the door of
the appliance slightly open. This w ill help the d oor
seals to last l onger and prevent odours from forming
withi n the appliance.
If the appliance must be moved, try to keep it in the
vertical position. If absolutely necessary, it can be
positioned on its back.
One of the factors that cau se odours to form in the
dishwasher n the seals.
Periodic cleaning with a damp sponge will prevent this
from occurring.
is r ema inin g fo od s trapped i
Before cleaning or performing maintenance, always
remove the plug from the socket.
To clean the e xterior and rubber p arts of the dishwasher,
do not use solvents or abrasive cle ani ng products.
Only use a clo th with warm so apy water.
To remove spots o r st ains from the surface of t he
interi or, use a cloth da mpened with water a n a little
vinegar, or a cleaning product mad e speci fically for
dishw ashers.
Remove the Plug
No Solvents or Abrasive Cleaning
Moving the Appliance
Seals
After every wash, turn off the water supply to the
appliance and leave the door slightly op en so that
moisture and odours are not tra pped inside.
After Every Wash
When not in use for a Timelong
18
Th e installation of the pipes
and electrical equipments
should be done by professionals .
Electrical Shock electrical power
dishwasher.
Failure to do so can result in death or electrical shock.
Hazard. Disconnect
before installing
The installation position of dishwasher sho uld be ne ar the existing in let and drain hoses and power co rd.
One side of the ca binet sink should be chosen to facilitate the connection of drain hoses of the dis hwa sher.
Installation preparation
Note: please che ck the accompanying installation accessories(hook for aes thetic panel,screw)
●