DeDietrich 100012532 Manual

QM 1 / 2 IT2673A
TI
Technical information
Heat pumps
Outdoor units AWHP... - All powers
Option Electrical tracing kit (Heating cord)
Package EH113
01.45.91.56.02 – G.CHAMPION /J. SCHALCK N° IT2673A-en 20/06/2018
EN
SUSTAINABLE COMFORT ®
1. Purpose
On the field, we noticed that the installation of the heating cord (EH113) does not comply with our recommendations
and the rules of the art. These non-compliances led to fire starts.
Therefore, and for safety reasons, we ask you to check the whole installed product park, during the mandatory
annual maintenance.
2. Accessories concerned
100012532 - Condensate container for wall bracket (Package EH111)
100012534 - Electrical tracing kit (Package EH113)
3. Main checkings
3.1 Thoroughly inspect the condition of the cord:
Check if the heating cord is not damaged (bare or cut), if it has not been damaged by rodents,...
- Only qualified professionals are authorised to work on the appliance and the
installation.
- Before any intervention, ensure compliance with safety standards (including the
grounding of metal pipes in accordance with the professional standards).
- Any manipulation of the heating cord must be done with the power OFF !
- Follow the instructions hereafter to avoid any risk of overheating and fire !
- It is strictly forbidden to modify the structure of the electric heating cord !
Remove the cord if it is damaged !

QM 2 / 2 IT2673A
3.2 Check that the cord is correctly positioned in the condensate container
Reminder of the installation instructions:
Check that the heating cord IS NOT:
- crossed, overlaped or juxtaposed. Its curve radius is at least 25 mm.
- cut or shortened,
- twisted on its heating part,
- placed in contact with the evaporator,
- in contact with flammable substances,
- in contact with hot parts, or other electrical cables,
- in contact with temperature-sensitive parts or materials (The heating cord temperature can rise above 150 °C).
The heating cord MUST BE:
- protected from sharp or cutting edges
- attached with Class F aluminum tape on the condensate container
- or held by collars : Check that the tightening is not too strong on the cord to avoid damaging it by throttling.
- placed entirely outside the outdoor unit.
It is strictly forbidden to install the heating cord inside the outdoor unit !
G001105