Defiant DFI-0452-WH Installation and operating manual

Defiant Motion Security Light
Quick Installation Reference
DFI-0452-WH

Package Includes
Defiant Motion Security Light
6” x 5.4” Solar Panel with 10’ cordMotion Security Light Solar Panel Mount
Metal Wall Mount
(Allows for wall
or eave mount)
Mounting Hardware
x 5
x 5
Mounting
Screws
Wall
Anchors

Basic Features/Specifications
Defiant Motion Security Light
LED
500 Lumen Output
5000 Kelvin
(Light Color Temperature)
Motion-Detection
Li-ion Battery
with 2-hour continuous
run-time when fully
charged.
Wall and Eave Mountable
On-body adjustments
•LUX - Adjustment to compensate for
ambient light.
• SENS - Adjustment for sensitivity of the
motion sensor.
• TIMER - Adjustment for length of time
light stays on when motion is detected.
F
Eco Mode
Extends battery run-time
by optimizing output.

ECO Mode
Defiant Motion Security Light
MAX
Battery
Power
Battery
Power
Depleted
Battery at 3.7V
ECO Mode activates to conserve battery power.
100% Light Output
Reduced Light Output

Pre-Installation Steps
Defiant Motion Security Light
Locate the Solar Panel is a position where it will receive
direct sunlight, and won’t be covered by a shadow at
any time in the day.
Face the Solar Panel towards the south,
for maximum sun exposure.
Plan to mount the Solar Panel and Motion Security
Light within 10 feet of each other.
(For longer distances, an extension cable may be
available from Novolink)
1) 2)
3) The light can be mounted either on
the side of a wall or below and eave.
4)