Dekko ECA OASIS User manual
OASIS™&OASIS™MINIINSTALLATION
10 Mountain View Drive | Shelton, CT 06484 | P: 800-521-3175 | www.electri-cable.com
9065-0099 REV M © ECA– January 2017—Product specifications subject to change without notice
For use with: This product fits tables .88” – 2” thick.
1‐
Locate and cut the hole for the Oasis or Oasis Mini based on the
chart to the right (.125” max corner radii). Note undercut
required for lid clearance along both long sides (see Detail A & C).
Insert the Oasis or Oasis Mini (A) into the cutout from above.
2‐
Key slots in clamps (B) engage over T-studs on Oasis’s (A)
side plates, and thumb screws (C) thread into clamps and
tighten against the underside of the table. Use outermost
key slots on clamps for Oasis & Oasis Mini (see detail B & C).
Note: inner key slots on clamp (B) are not used for
this product.
3‐
Connect all power and data cabling as needed.
4‐
Check lids for smooth and uninterrupted movement.
Useouter
keyslotsfor
Oasis&OasisMini
ToolsNeededComponents&Hardware
A)OasisorOasisMini
Qty.1
(OasisMiniShown)
B)Clamp,
Qty.2
C)ThumbScrew,
Qty.4
DetailB
CUTOUTSIZES
Oasis OasisMini
Cutout 8.25” 8.25”
Width
Cutout 29.12” 14.12”
Length*
*Undercutrequiredalongthislength
DetailA
Page 1 of 2
OASIS™&OASIS™MINIINSTALLATION
10 Mountain View Drive | Shelton, CT 06484 | P: 800-521-3175 | www.electri-cable.com
9065-0099 REV M © ECA– January 2017—Product specifications subject to change without notice
9.00 Clearance
Centered on O
p
enin
g
.50
Both
Sides
Cutout Width
Door Swin
g
Outer Pan
(Optional)
Table
Thickness
.
88
–
2.
00
5.28
Outer Pan
De
p
th
Key slots Engaged
Over T-Studs Thumb
Screws
Corded = 4.90
Sys 42 = 5.85
11.20 Outer Pan Width
DetailC
Page 2
of 2
This manual suits for next models
1
Table of contents
Other Dekko Accessories manuals
