Dekko ECA SECLUSION Series User manual

SECLUSION SERIES BRACKET INSTALLATION
9065-0122 REV K
10 Mountain View Drive | Shelton, CT 06484 | P: 203-924-6617 | www.dekkopower.com
© ECA–January 2020—Product specifications subject to change without notice
Under Table Mounting
Table Top Mounting
Plug into an appropriate outlet that is properly installed and grounded in
accordance with all local codes and regulations.
For use with: Do not use provided screws on table thicknesses less than 1.00”.
Note: *Use caution not to pierce top surface with screws.
Installation Instructions:
1- Determine if Seclusion (A) is to be mounted on top or under table.
2- Attach either Table Top Bracket (D) or Under Table Bracket (E) to
Seclusion using Bracket Screws (B), provided. Note: for under table
mounting, the Seclusion must be a minimum of 1” back from the
table’s edge.
3- Determine location for Seclusion and attach to table, as shown, using
Mounting Screws (C), provided*.
4- Make data connections if required (use caution when snapping RJs
into faceplate to prevent them from falling into Seclusion).
5- Connect all power and data cabling as needed.
Tools Needed
Components & Hardware
(A) Seclusion, Qty. 1
(C) Mounting Screw
#10 x .75”, Qty. 3
(D) Table Top Bracket, Qty. 1
(E) Under Table Bracket, Qty. 1
(B) Bracket Screw
#8 x 5/16” Qty. 2

SECLUSION C SERIES INSTALLATION
9065-0328 REV C
Table Top Mount
For use with: Do not use provided screws on table thicknesses less than
1.00”.
Note: *Use caution not to pierce top surface with screws.
A furniture Power Distribution Unit is not for permanent installation as
part of the building structure and not for mounting in a permanently-
installed furnishing such as a fixed countertop.
Installation Instructions:
1- Determine if Seclusion (A) is to be mounted on top or under table.
2- Attach either Table Top Bracket (D) or Under Table Bracket (E) to
Seclusion using Bracket Screws (B), provided. Note: for under table
mounting, the Seclusion must be a minimum of 1” back from the
table’s edge.
3- Determine location for Seclusion and attach to table, as shown, using
Mounting Screws (C), provided*.
4- Make data connections if required (use caution when snapping RJs
into faceplate to prevent them from falling into Seclusion).
5- Connect all power and data cabling as needed.
Under Table Mounting
Tools Needed
Components & Hardware
(A) Seclusion, Qty. 1
(C) Mounting Screw
#10 x .75”, Qty. 3
(D) Table Top Bracket, Qty. 1
(E) Under Table Bracket, Qty. 1
(B) Bracket Screw
#8 x 5/16” Qty. 2
Plug into an appropriate outlet that is properly installed and grounded in
accordance with all local codes and regulations.
10 Mountain View Drive | Shelton, CT 06484 | P: 203-924-6617 | www.dekkopower.com
© ECA–January 2020—Product specifications subject to change without notice