Dell Inspiron 2100 User manual

Dell®PowerEdge®2100/180 and 2100/200 SystemsDell®PowerEdge®2100/180 and 2100/200 Systems
SERVICE MANUAL
Model MMM
®

®
Dell®PowerEdge®2100/180 and 2100/200 Systems
SERVICE MANUAL

Information in this document is subject to change without notice.
1996 Dell Computer Corporation. All rights reserved.
Reproduction in any manner whatsoever without the written permission of Dell Computer Corporation is strictly forbidden.
Trademarks used in this text: Dell, the DELL logo, and PowerEdge are registered trademarks of Dell Computer Corporation; MS-DOS and
Microsoft are registered trademarks of Microsoft Corporation; IBM is a registered trademark of International Business Machines Corporation;
Intel, LANDesk, and Pentium are registered trademarks of Intel Corporation.
Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products.
Dell Computer Corporation disclaims any proprietary interest in trademarks and trade names other than its own.
September 1996 P/N 82502

Index 1
Index
B
battery, removal, 4-18
beep codes, 3-1
bezel, removal, 4-4
boot routine, observing when
troubleshooting, 2-3
bracket, hard-disk drive, removal, 4-10
C
cables, DC power, 1-12
CD-ROM drive
access indicator location, 1-3
location, 1-4, 4-7
removal, 4-8
computer
back/left side internal view, 1-5
cover removal, 4-3
front/right side internal view, 1-4
orientation, 1-3
technical specifications, 1-19
configuration guidelines, SCSI drives, 1-7
connectors, locations, 1-14, 4-14
control panel assembly
location, 1-4
removal, 4-6
D
DC power distribution diagram, 1-13
DIMMs
ECC, 1-6
installation, 4-15
removal, 4-15
socket population rules, 1-6
diskette drive
access indicator location, 1-3
location, 1-4, 4-7
removal, 4-8
diskette-based diagnostics, 2-6
DREQ line assignments, list of, 1-18
drives
boot device, 1-8
externally-accessible drive bays, 1-3
location of, 4-7
SCSI configuration guidelines, 1-7
SCSI ID numbers, 1-8
SCSI termination jumper examples, 1-9
SCSI termination jumpers, 1-8
E
ECC, 1-6
EISA expansion cards, 1-6
error messages, system, list of, 3-3
expansion subsystem, 1-6