Dell OptiPlex 7440 User manual

Re-imaging the
Dell OptiPlex™ 7440
All-in-One Computer
Instructions
8/2016
Use these instructions to re-image the Dell OptiPlex™ 7440 computer.
This document includes the following topics:
Re-imaging the Dell OptiPlex 7440 computer (page 2)
Status: Released EFFECTIVEDocument: 23-19055-00 Doc Type: ZLU Change #: 500000077641Revision: 01
Version: AUsage: Production Usage Classification: PublicPrint Date: 22-Jun-2017 15:57:11 GMT Daylight Time
Valid From: 28-Sep-2016 To: 31-Dec-9999 Doc Part: EN

Re-imaging Dell OptiPlex 7440 computer2
Re-imaging the Dell OptiPlex 7440 computer
Introduction This topic describes how to re-image the Dell OptiPlex 7440
computer. Re-imaging will remove all software on the computer
and re-install the factory default Microsoft® Windows® operating
system. In the event that your computer fails or becomes
corrupted, use these instructions to re-image it.
Before you begin Be sure to back up data files and personal information before
re-imaging the computer.
If applicable, make note of the network settings.
Re-imaging the
computer
To re-image the computer:
1. Turn on the OptiPlex computer.
The system boots to the windows boot manager. You have
30 seconds to select either Windows 7 or Recovery.
2. Select Recovery to re-image the computer.
Note: If you do not make a selection within 30 seconds, the
system will automatically boot to Windows 7.
Status: Released EFFECTIVEDocument: 23-19055-00 Doc Type: ZLU Change #: 500000077641Revision: 01
Version: AUsage: Production Usage Classification: PublicPrint Date: 22-Jun-2017 15:57:11 GMT Daylight Time
Valid From: 28-Sep-2016 To: 31-Dec-9999 Doc Part: EN

Re-imaging Dell OptiPlex 7440 computer 3
The system begins executing a script to re-image the computer.
The factory default image will be applied over the old corrupt
image.
3. When the operation successfully completes, press any key to
continue.
The computer restarts and is set back to the factory default
settings with a new operating system.
Status: Released EFFECTIVEDocument: 23-19055-00 Doc Type: ZLU Change #: 500000077641Revision: 01
Version: AUsage: Production Usage Classification: PublicPrint Date: 22-Jun-2017 15:57:11 GMT Daylight Time
Valid From: 28-Sep-2016 To: 31-Dec-9999 Doc Part: EN

23-19055-00
8/2016
Becton, Dickinson and Company
BD Biosciences
2350 Qume Drive
San Jose, CA 95131 USA
bdbiosciences.com
[email protected]
BD Biosciences
European Customer Support
Tel [phone]
Fax [phone]
[e-mail]
Copyrights
© 2016, Becton, Dickinson and Company. All rights reserved. No part of this publication may be reproduced,
transmitted, transcribed, stored in retrieval systems, or translated into any language or computer language, in any
form or by any means: electronic, mechanical, magnetic, optical, chemical, manual, or otherwise, without prior
written permission from BD Biosciences.
The information in this document is subject to change without notice. BD Biosciences reserves the right to change its
products and services at any time to incorporate the latest technological developments. Although this guide has been
prepared with every precaution to ensure accuracy, BD Biosciences assumes no liability for any errors or omissions,
nor for any damages resulting from the application or use of this information. BD Biosciences welcomes customer
input on corrections and suggestions for improvement.
Trademarks
Trademarks are the property of their respective owners.
© 2016 BD. BD and the BD Logo are trademarks of Becton, Dickinson and Company.
Status: Released EFFECTIVEDocument: 23-19055-00 Doc Type: ZLU Change #: 500000077641Revision: 01
Version: AUsage: Production Usage Classification: PublicPrint Date: 22-Jun-2017 15:57:11 GMT Daylight Time
Valid From: 28-Sep-2016 To: 31-Dec-9999 Doc Part: EN