Dell OptiPlex FX130 Guide

Dell OptiPlex
FX130 & FX170
VESA Mount
Manual

Notes, Cautions, and Warnings
NOTE: A NOTE indicates important informationthat helps you make betteruseof your
thinclient.
CAUTION: A CAUTION indicates potential damage to hardware or loss of data
if instructions are not followed.
WARNING: A WARNING indicates a potential for property damage, personal
injury, or death.
______________
Information in this document is subject to change without notice.
© 2011 Dell Inc. All rights reserved.
Reproduction of these materials in any manner whatsoever without the written permission
of Dell Inc. is strictly forbidden.
Trademarks used in this text: Dell™, the DELL logo, and OptiPlex™.
Other trademarks and trade names may be used in this publication to refer to either the
entities claiming the marks and names or their products. Dell Inc. disclaims any
proprietary interest in trademarks and trade names other than its own.
March 2011 Rev. A00

| 3
Dell OptiPlex FX130 & FX170
VESA Mount Manual
WARNING: Before beginning, turn off the thin client, disconnect the AC adapter
from the electrical outlet and the thin client, and remove any other external cables
from the thin client.
WARNING: Before installing your thin client in an enclosure, read the safety
instructions that shipped with your thin client.
VESA Mounting Materials
1
VESA Mounting Plate
2
VESA Mounting Bracket
3
Screws
1
2
3

| 4
VESA Bracket
1 Remove the middle button on of the side plate on your thin client that has
three mounting holes.
NOTE: Only one side plate has three mounting holes.

| 5
2 Place the VESA mounting plate on the thin client’s side plate chassis and
insert the screws to secure the mounting plate to the thin client.