Dell Precision Tower 3630 User manual

Precision Tower 3630
Dust Filter Installation Guide
Regulatory Model: D24M
Regulatory Type: D24M003

Notes, cautions, and warnings
NOTE: A NOTE indicates important information that helps you make better use of your product.
CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem.
WARNING: A WARNING indicates a potential for property damage, personal injury, or death.
© 2018 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries. Other trademarks
may be trademarks of their respective owners.
2018 - 07
Rev. A00

Contents
1 Dust lter for Precision Tower 3630............................................................................................................... 4
2 Getting help...................................................................................................................................................6
Contacting Dell................................................................................................................................................................... 6
Contents 3

Dust lter for Precision Tower 3630
The dust lter for the Precision Tower 3630 helps protect the system from ne dust particles. After installation of the dust lter, the BIOS
can be enabled to generate a preboot reminder to clean or replace the dust lter based on the time interval set.
Follow these steps to install the dust lter:
1 Align the plastic tabs of the dust lter to the slots on the system chassis and gently press to ensure that the dust lter ts rmly onto
the system.
2 To remove the dust lter:
a With the help of a plastic scribe, gently pry the edge from the bottom to loosen the dust lter [1].
b Remove the dust lter from the system chassis [2].
1
4 Dust lter for Precision Tower 3630

3 Restart the system and press F2 to enter the BIOS Setup menu.
4 In the BIOS Setup menu, navigate to System Conguration > Dust Filter Maintenance and select from any of the following intervals:
15, 30, 60, 90, 120, 150, or 180 days.
NOTE: Default setting: Disabled.
NOTE: Alerts are generated only during a system reboot and not during normal OS operation.
To clean the dust lter, brush or gently vacuum and then wipe down the external surfaces with a moist cloth.
Dust lter for Precision Tower 3630 5

Getting help
Contacting Dell
NOTE: If you do not have an active Internet connection, you can nd contact information on your purchase invoice, packing slip,
bill, or Dell product catalog.
Dell provides several online and telephone-based support and service options. Availability varies by country and product, and some services
may not be available in your area. To contact Dell for sales, technical support, or customer service issues:
1 Go to Dell.com/support.
2 Select your support category.
3 Verify your country or region in the Choose a Country/Region drop-down list at the bottom of the page.
4 Select the appropriate service or support link based on your need.
2
6 Getting help