dellonda DH80 User manual

Dellonda Premium Pre-Lit 5ft/150cm,
6ft/180cm, 7ft/210cm Hinged Xmas Tree
LED’s & PE/PVC Tips
Models DH80, DH81, DH82
Thank you for purchasing a Dellonda product. Manufactured to a high standard, this product will, if used
according to these instructions, and properly maintained, give you years of trouble free performance.
www.dellonda.co.uk DH80, DH81, DH82 Issue 1 27/07/2021

2 www.dellonda.co.uk
• ELECTRICAL SAFETY
• WARNING! It is the user’s responsibility to
check the following:
• Check all electrical equipment and appliances
to ensure that they are safe before using.
Inspect power supply leads, plugs and all
electrical connections for wear and damage.
Dellonda recommend that an RCD (Residual
Current Device) is used with all electrical
You may obtain an RCD by contacting your
local domestic stockist. If the product is used
in the course of business duties, it must be
maintained in a safe condition and routinely
PAT (Portable Appliance Test) tested.
• Electrical safety information: It is important
that the following information is read and
understood.
• Ensure that the insulation on all cables and on
the appliance is safe before connecting it
to the power supply.
• Regularly inspect power supply cables and
plugs for wear or damage and check all
connections to ensure that they are secure.
• Important: Ensure that the voltage rating on
the appliance suits the power supply to be
used and that the plug is tted with the correct
fuse - see fuse rating in these instructions.
• DO NOT pull or carry the appliance by the
power cable.
• DO NOT pull the plug from the socket by the
cable.
• DO NOT use worn or damaged cables, plugs or
connectors.
• Ensure that any faulty item is repaired or
replaced immediately by a qualied electrician.
• This product is tted with a BS1363/A 13 Amp
3 pin plug. If the cable or plug is damaged
• If the cable or plug becomes damaged during
use, switch off the electricity supply and
remove from use. Ensure that repairs are
carried out by a qualied electrician.
• Replace a damaged plug with a BS1363/A 13
amp 3 pin plug. If in doubt contact a qualied
electrician.
• Class II products are wired with live (brown)
and neutral (blue) only are marked with the
Class II symbol;
• A) Connect the BROWN live wire to the live
terminal ‘L’.
• B) Connect the BLUE neutral wire to the neutral
terminal ‘N’.
• C) After wiring, check that there are no bare
wires and ensure that all wires have been
correctly connected.
• DO NOT connect either wire to the earth
terminal.
• Ensure that the cable outer sheath extends
inside the cable restraint and that the restraint
is tight.
• Dellonda recommend that repairs are carried
out by a qualied electrician.
Important Information
Please read these instructions carefully and note any safe operational requirements, warnings &
cautions. Use the product correctly and with care for the purpose for which it is intended. Failure
to do so may cause damage and/or personal injury and will invalidate the warranty. Keep these
instructions safe for future use.
Refer to
instructions
Indoor use
only
Warning:
Keep away from
naked ames
Replacement fuse
rating:13A

www.dellonda.co.uk 3
• GENERAL SAFETY
• WARNING: Ensure the supply cord is not
trapped or damaged.
• WARNING: DO NOT locate multiple portable
socket-outlets or portable power supplies at
the rear of the appliance.
• This appliance is intended to be used in
household and similar applications such as
staff kitchen areas in shops, ofces and other
working environments; holiday homes, hotels
and other residential settings; and catering
and similar non-retail applications.
• This appliance can be used by children
aged from 8 years and above and persons
with reduced physical, sensory or mental
capabilities or lack of knowledge and
experience if they have been given supervision
or instruction concerning the use of the
appliance in a safe way and understand the
hazards involved. Children shall not play with
the appliance. Cleaning and user maintenance
shall not be made by children without
supervision.
• WARNING! Keep item away from naked ames
and other heat sources.
• Mount on rm, level and slip-free surface.
• Load tree decorations uniformly to ensure
stability.
• SPECIFICATION
• DO NOT overload branches or force branch
sections down.
• DO NOT leave young children or pets alone
with the tree.
• Always remove from the power supply before
moving, adjusting or cleaning the tree.
• INTRODUCTION
• This realistic Dellonda Christmas tree is
perfect for a little extra glamour. Pre-Lit with
warm white LED lights to save the hassle
and arguments of untangling the never
ending knot of lights! Our Xmas trees are
specially designed to include very realistic
pine branches using PE tips. We then use
PVC construction for the trunk to make the
tree look naturally strong, full and bushy. Our
trees are tested to and comply with EN71-2
Flammability Clause 4.1. This includes the
required tests concerning the ammability of
a product. Made up of PE/PVC branch tips
to give a natural and realistic look and feel.
Hinged branches make this Christmas tree
easy to assemble and store away. Includes
strong sturdy metal base, which folds away
for easy storage. Tree suitable for indoor use
only! Made from re retardant materials.
DH80 DH81 DH82
Height 150cm (5ft) 180cm (6ft) 210cm (7ft)
Width 889mm (35”) 1092mm (43”) 1245mm (49”)
Tip Style PE/PVC Mix PE/PVC Mix PE/PVC Mix
No. Of Tips 772 1000+ 1000+
Tip Width 5.7cm (2.25”) 5.7cm (2.25”) 5.7cm (2.25”)
No of LED Lights 190 270 350
Construction Hinged Hinged Hinged
Colour Green Green Green
Metal Stand size 407mm (16”) 457mm (18”) 508mm (20”)
Power supply 230v 230v 230v
Power 6W 6W 6W

Dellonda Limited
Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757575 [email protected] www.dellonda.co.uk
Fig.1
• ASSEMBLY
• Unpack tree sections and check condition of
all parts. If in doubt, DO NOT use.
• Unpack metal stand arrangement and open
out to form a 90o cross. Engage rst few
threads of locking screw into tapped hole in
stand tube.
• Assemble tree sections into the base, starting
with the largest, lowermost section (g.1).
• Locate square spigot on stem into hole in
stand tube. Tighten locking screw to x tree
section in place and to lock the stand in cross
form.
• Locate upper section into lower section using
the square spigot (g.1).
• Arrange branches to achieve desired
effects by gently arranging, separating and
straightening as appropriate.
• Once the tree is assembled connect the LED
light sections with the marked in line plugs
A-A, press fully together as shown in g. 2.
• Screw the threaded collar over the plug joint to
secure in place.
• When storing the tree, after removing any
decorations, unscrew the locking screw at the
base and separate the sections. Fold back
branches to the stem
• Fold and close the stand and place, along with
tree sections and locking screw in original
packing.
Fig.2
Environment Protection, Waste Electrical and Waste
Electronic Equipment Regulations (WEEE)
Recycle unwanted packaging materials. When this product is no longer required, or has
reached the end of its useful life, please dispose of in an environmentally friendly way.
Drain any uids (if applicable) into approved containers, in accordance with local waste
regulations. It is our policy to continually improve products and we reserve the right to alter
data, specications and parts without prior notice. No liability is accepted for incorrect use
of this product. Guarantee is 12 months from purchase date, proof of which is required for
any claim.