dellonda DH27 User manual

www.dellonda.co.uk DH27 Issue:1 13/01/20
Adjustable Double Monitor Arms Quick
Release VESA Plate for 17-32” Screens
Model No. DH27
Thank you for purchasing a Dellonda product. Manufactured to a high standard, this product will, if used
according to these instructions, and properly maintained, give you years of trouble-free performance.

www.dellonda.co.uk 2
Important Information
Please read these instructions carefully. Note the safe operational requirements, warnings & cautions.
Use the product correctly and with care for the purpose for which it is intended. Failure to do so
may cause damage and/or personal injury and will invalidate the warranty. Keep these instructions
safe for future use.
Contents
About the Product
Adjustable double monitor arm creates a more
ergonomic workspace. Features quick release
VESA plate making the mounting process quick
and simple. Monitor arms easily adjust using gas
spring system. Features 360° rotation enabling you
to convert your display orientation from landscape
to portrait. Features cable management system
ensuring a tidy desk.
Safety Instructions
• This product contains small items that could
be a choking hazard if swallowed. Keep these
items away from small children.
• Ensure instructions are read and completely
understood before attempting installation.
If unsure contact a professional installer for
assistance.
• The desk/mounting surface must be capable
of supporting the combined weight of the
mount and the display. Otherwise the structure
must be reinforced.
• Never exceed the max. load of 9kg.
• Safety gear (safety shoes) and proper tools
must be used.
• A minimum of 2 people are required for this
installation. Failure to use safety equipment
can result in property damage, serious injury
or death.
Refer to
instruction
manual
Wear
safety
footwear

www.dellonda.co.uk 3
• Check xings for tightness every 2 months.
• Note: this product is intended for indoor use
only.
• WARNING! This product contains high
pressure gas spring parts. Do not put into a
re, high temperature or disassemble it.
• To ensure the sealing performance of the gas
spring the upper arm (with the spring) should
adjusted properly each month.
Step 1: Preparation before
monitor installation
• Make sure there are VESA holes 100 x 100mm
or 75 x 75mm in the monitor. If not, the mount
can not be installed, refer to diagram above.
• Remove the original xed base of the monitor.
Be careful to not scratch the screen.
Step 2A: Option 1
Step 2B: Option 2 Grommet

www.dellonda.co.uk 4
Step 3: Connect plate to
monitor
Step:4 Fit monitor to arm
Step:5 Adjust the monitor

Dellonda Limited
Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757575 [email protected] www.dellonda.co.uk
Environment Protection
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and
packaging should be sorted, taken to a recycling centre and disposed of in a manner which is
compatible with the environment. When the product becomes completely unserviceable and requires
disposal, drain any uids (if applicable) into approved containers and dispose of the product and
uids according to local regulations.
www.dellonda.co.uk 5
Step:6 Cable Management
Specication
• Supported VESA: 75 x 75, 100 x 100mm
• Supported screen size: 17-32”
• Load capacity: 2-9kg
• Tilt range: -90 - 15°
• Installation: Clamp & grommet