9
1. Press (B2) to enter the menu;
2. Press the scrolling arrows (B3) or (B10) until
"General" is displayed;
3. Press (B11) to conrm;
4. Press the scrolling arrows or until the re-
quired item is displayed:
Set temperature:
To change the temperature of the water used to make the cof-
fee, proceed as follows:
• Press (B11). The current value appears on the dis-
play (B1) and the "New" value ashes;
• Select the new value you want to set using the scrolling
arrows (B3) or (B2);
5. When the required value (low, medium, high) has been
selected, press .
The display goes back to the previous screen.
Please note:
Varying the temperature has most eect for long beverages.
Water hardness
For instructions on identifying and setting water hardness, see
section "16. Setting water hardness".
Auto-o (standby):
Auto-o can be set so that the appliance goes o after 15 or 30
minutes, or 1, 2 or 3 hours
• Press (B11). The current value appears on the dis-
play (B1) and the "New" value ashes;
• Select the new value you want to set using the scrolling
arrows (B3) or (B10);
• When the required value (15 min, 30 min, 1 hour, 2 or 3
hours) has been selected, press .
The display goes back to the previous screen.
Energy saving:
To disable or enable "Energy Saving", proceed as follows:
• Press (B11). The current state ("Enabled" or "Dis-
abled") and the operation to be performed ("Disable?" or
"Enable?") by conrming with appear on the dis-
play (B1);
• Press to disable or enable the function.
The display goes back to the previous screen.
Please note:
• when the function is enabled, the "ECO" symbol appears
on the display.
• When in energy saving mode, a few seconds elapse before
the rst coee, cappuccino or milk-based coee is deliv-
ered as the appliance must heat up again.
• If the milk container (D) is inserted, "Energy Saving" has
no eect.
Beep:
Use this function to enable or disable the beep. Proceed as
follows:
• Press (B11). The current state ("Enabled" or "Dis-
abled") and the operation to be performed ("Disable?" or
"Enable?") by conrming with appear on the dis-
play (B1);
• Press to disable or enable the function.
The display goes back to the previous screen.
Default beverages
Use this function to reset the default values for all the beverag-
es, or the individual previously customised beverages.
• Press (B11). The previously customised beverages
and "All" appear on the display (B1);
• Select "All" to reset the strength and quantity settings of
all beverages to the default values, or select the required
beverage, then press ;
• To reset the default values, press .
• The appliance conrms the reset and goes back to the pre-
vious screen.
Reset another beverage or press (B2) to exit the menu.
Default values:
Usethisfunction to resetall the appliance and beveragesettings
(apart from the language which remains as selected the rst
time the appliance was used).
4. Press (B11);
5. Press to reset all the settings;
6. The appliance conrms the reset and goes back to the pre-
vious screen.
Press (B2) to exit the menu.
6.5 Statistics
This displays statistics relating to the machine. To view the sta-
tistics, proceed as follows:
1. Press (B2) to enter the menu;
2. Press the scrolling arrows (B3) or (B10) until
"Statistics" is displayed;
3. Press (B11): statistics on the appliance appear on
the display (B1), use the scrolling arrows or
to scroll through the items;
4. Then press to exit.
To go back to the main screen, press again.
7. MAKING COFFEE
7.1 Temporarily varying the coee strength
To temporarily vary the strength of the coee in the automatic
recipes, press (B11):
my
Custom (if programmed) /
Standard
