DeLonghi Vertuo Lattissima User manual

VERTUO
LATTISSIMA

INSTALLATION
1. Machine overview 3
2. Packaging content 7
3. Connectivity 7
4. Water hardness seing 8
5. Open/close 10
6. Disassembling the milk carafe 10
7. Assembling the milk carafe 11
8. Cleaning the milk carafe 12
9. First use 13
USE
10. Coee Preparation 15
11. Milk Preparation & Daily rinsing 17
12. Milk recipes 22
SETTINGS
13. Energy saving 25
14. Seing the coee volume 26
15. Reset to factory seings 26
16. Turn on/o Bluetooth & Wi-Fi 27
MAINTENANCE
17. Emptying the system before a period of non-use 28
18. Aer a long period of non-use 30
19. Cleaning cycle 32
20. Descaling 35
21. Troubleshooting 38
TECHNICAL SPECIFICATIONS
22. Specifications 41
23. Disposal and environmental protection 41

2
1
1
39
10
5
6
8
4
7
11
1OVERVIEW
1Water tank and lid
2Descale mark
3Maximum level mark
4Milk carafe connector door
5Coee outlet
6Descaling pipe
7Descaling pipe cover
8Used capsule container
9Drip tray
10 Drip grid
11 Adjustable cup support
Overview of machine

4
12
14
15
16
18
17
13
12 Coee buon - ON/OFF
13 Locking / Unlocking lever
14 Descale alert
15 Rinse alert
16 Hot foam buon
17 Lae macchiato buon
18 Cappuccino buon
Refer to “Descaling”
section
See recipes on page 23
Refer to “Milk
preparation” section
Unboxing: some dust may be present on the surface of the machine due
to the recycled materials used in the packaging. This is not dangerous,
simply clean with a so clean damp cloth.
Overview of display

5 6
25
26
21
29
19
22
27 28
23
20
24
19 Milk carafe
20 Milk carafe lid
21 Milk spout
22 Milk action knob
23 Milk carafe connector
24 Connector housing
25 Milk aspiration tube
26 Lid removal buon
27 Remove to clean position
28 Rinsing position
29 Milk recipe position
Overview of milk carafe

5 6
HELP
www.nespresso.com/help
SAFETY
CAUTION: Before operating your coee machine, please refer to the
safety instructions leaflet to avoid possible harm and damage.
THANK YOU FOR CHOOSING
NESPRESSO.
FOLLOW THESE INSTRUCTIONS OR GO ONLINE FOR THE FULL
USER MANUAL AT WWW.NESPRESSO.COM/HELP .

7
1. Download the Nespresso App.
2. Launch the App on your smartphone or tablet.
3. Click on the Machine icon.
4. Follow the instructions via the App.
3
2
Connectivity
BENEFITS OF CONNECTING YOUR MACHINE
Smart Coee: Enjoy the latest coee innovations from Nespresso by always
keeping your machine up to date.
Expert advices: Receive real-time tips thanks to step-by-step features such
as descaling, rinsing & cleaning your machine.
Machine care: Get support and tutorials for your machine care via your
smartphone.
How to connect your machine:
Package content
1. Coee machine
2. Nespresso welcome material
3. Nespresso capsules box
4. Safety instructions
5. Quick start guide + Water hardness test strip
6. Warranty
Smart
coee
Expert
advice
Machine
care

* AppStore®is a trademark of Apple Inc., registered in the U.S. and oth-
er countries.
** Google Play and the Google Play logo are trademarks of Google LLC.
8
4
1. Take the water hardness test strip in the quick start guide and place it un-
der water for 1 second. Wait about one minute before reading test result.
2. The number of red squares indicates the water hardness level.
1.
0
1. 1
1. 2
1. 3
1.
4
3.
Water hardness seing

9
10. The buons blink three times rapidly to confirm new seing.
11. The machine is now reprogrammed with the new water hardness seing
and turns automatically in ready mode.
3. Plug the power cord.
4. Make sure that no accessory (milk carafe or descaling pipe) is connected
to the milk carafe connector door.
5. Turn the machine on.
NOTE: Programming the machine according to the actual hardness of the
local water supply warrants its lifetime and it needs to be descaled less oen.
6. Press hot foam buon for three seconds to enter the menu mode.
7. Clean and descale alerts blink together.
8. Press cappuccino buon , the system proposes one out of the five
combinations. If the selection is not done within 15 sec., it exits automat-
ically.
9. Set the hardness level by pressing the corresponding buon in below ta-
ble (within 15 seconds).
Water hardness Buon to press fH dH CaCO3
< 5 < 3 < 50mg/l
> 7 > 4 > 70mg/l
> 13 > 7 > 130mg/l
+> 25 > 14 > 250mg/l
+> 38 > 21 > 380mg/l

10
1. Press lid buon to remove the lid from the milk carafe. Disconnect the
aspiration tube. Turn the milk spout counter clockwise and pull it o.
2. Turn the milk carafe connector towards the unlock position and pull it
out. Turn the knob to “remove to clean” position and pull it out.
5
Open/close
6
Disassembling the milk carafe

11
1. Insert correctly the milk carafe connector into the milk carafe lid and turn
it clockwise towards the lock position . Insert the milk spout. Insert
the knob and turn it to the “milk” position.
7
Assembling the milk carafe
2. Insert the aspiration tube until its circular lip touches the boom of the
carafe lid. Plug the milk carafe lid to the milk carafe.

12
1. Disassemble the milk carafe. Refer to section “Disassembling the milk ca-
rafe”.
2. If a dishwasher is available: place all milk carafe components in the upper
part of your dishwasher.
If a dishwasher is not available: soak all components in hot potable water
(50°C / 122°F) together with a mild detergent for at least 30 minutes; then
rinse thoroughly with hot potable water (50°C / 122°F). Do not use scented
detergents.
8
Cleaning the milk carafe
The procedure must be performed aer each use. Dishwashing is recom-
mended. When a dishwasher is not available, the milk carafe components can
be washed by hand.
3. Clean the interior of the milk carafe, the milk spout and the knob with a mild
detergent and rinse with hot potable water.
* Make sure the Air inlet is clean, this will ensure beverage quality cup aer
cup.
Do not use abrasive material that might damage the surface of the equipment.
4. Dry all six components with a clean cloth and reassemble. Refer to section
“Assembling the milk carafe”.
Aer cleaning the milk carafe , if you still have issues with your milk frothing
performance, please proceed with a second rinsing cycle by turning the knob
to the rinsing position.
9
or

13
9
First use
4. Press the coee buon three times within 2 seconds.
1. Rinse the water tank before filling with only fresh potable water up to the
maximum level.
2. Put the water tank back in position. Plug the power cord and place a con-
tainer under the coee outlet. Ensure the lever is in the lock position .
3. Turn on your machine.

14
7. Then reassemble all six dried components and re-aach the milk carafe
to the machine (refer to "Assembling / Disassembling the milk carafe"
section).
8. Your machine is now ready to use.
5. The machine will start rinsing. The cleaning procedure will run automati-
cally for 5 minutes.
NOTE: water may accumulate inside the machine’s head during cleaning.
If this happens please dry visible parts with a clean dry cloth.
6. Disassemble the milk carafe and clean all six components in the top rack
of your dishwasher. In case a dishwasher is not available, refer to “Clean-
ing the milk carafe” section.
CAUTION: first read the safety precautions to avoid risks of fatal electric
shock and fire. Please ensure ground continuity when plugging the machine
in the power outlet.
NOTE: to turn o the machine, press and hold the ON-OFF/Coee but-
ton until it switches o.
When unpacking the machine, remove the plastic film, water tank and
cup support. Adjust the cable length and store the excess in the cable guide
under the machine.

2. Turn the lever towards the unlock position (1) and insert a capsule (2).
3. Close the machine by turning the lever (1) until the lock position (2).
Place a cup on the support (3). Cup support height can be adjusted to
accommodate your cup size.
15
10
1. Fill the water tank with only fresh potable water.
Coee preparation

4. The coee buon starts blinking, as soon as light is steady white, press
coee buon to start the coee brewing.
16
5. When the coee stops brewing, turn the lever towards the unlock posi-
tion to open the machine and eject the capsule. Then close it.

17
WARNING: Plant-based beverages contain allergens (gluten, almond,
soy) and should be handled carefully by people suering from food aller-
gies. The volume of froth depends on the nature of the beverage used, and
its temperature.
For a perfect milk froth, use fresh semi-skimmed, pasteurized cow milk at
refrigerator temperature (about 4°C). It is recommended to clean the milk
carafe aer each use.
WARNING: Do not use liquids other than cow milk and plant-based
beverages.
2. Fill the milk carafe up to the “MAX” level, do not overfill. Reassemble the
milk carafe.
1. Fill the water tank only with fresh potable water up to the “MAX” level
before preparing a coee or a milk recipe.
11
Milk Preparation & Daily Rinsing

18
5. Open the steam connector door by sliding it down. Connect the milk ca-
rafe to the machine.
3. Turn the lever to the unlock position and insert the capsule. Close the
machine and then push the lever towards the lock position . The machine
heats up for approximately 30 seconds (fading coee buon).
4. Turn the knob to the milk position.

19
7. Wait until cappuccino buon , lae macchiato buon and hot
foam buon lights up.
8. Press the cappuccino or lae macchiato buon . The preparation
starts aer approx. 30 seconds (for cappuccino first coee then milk, for
lae macchiato first milk then coee) and will stop automatically.
9. At the end of the preparation, the rinse alert illuminates to indicate
that a rinsing cycle of the milk carafe is required .
6. Place a cappuccino cup or a lae macchiato glass under the coee outlet
and adjust milk spout position by rotating it up to the center of the cup.
Refer to section 12 for cup size selection according to recipe style and
capsule selected.

20
WARNING: the rinsing system does not remove the allergens. Disassem-
ble and clean the milk carafe before changing milks, preferably in the dish-
washer. When a dishwasher is not available, wash by hand.
Aer each milk or plant based beverage dispensing, the rinsing cycle of
the carafe is recommended.
11. When the rinsing process is finished, the rinse alert turns o. Turn back
the knob to milk position .
10. Place a container (minimum 200 ml) under the milk spout. Turn the knob
to rinse position. Milk system rinsing process starts and hot water
combined with steam flows through the milk spout. The rinsing process
stops automatically.