Delta Electronics SMT Power Inductor HMU1055 Installation instructions

SMT Power Inductor
HMU1055 Type
Mechanical Dimension :
DELTA ELECTRONICS, INC.
(TAOYUAN PLANT CPBG) 252, SAN YING ROAD, KUEISAN INDUSTRIAL ZONE, TAOYUAN SHIEN, 333, TAIWAN, R.O.C.
TEL: [phone]; FAX: [phone]
http://www.deltaww.com
Electrical Characteristics : At 25 : 100KHz, 1V
oC
130
1. Tolerance of inductance is 20%..
2. Isat is the DC current which cause the inductance drop to Li.
O
3. Irms is the DC current which cause the surface temperature of the part increase less than 45 C.
OO
4. Operating temperature : -20 C to 105 C ( including self-temperature rise ).
rms
L
(uH)
Li
(uH) MIN.
I
(Adc)
(m ) MAX.
DCR
sat
I
(Adc)
13
2
Features
CH
G
F
D
D
E
A
B
8.5
2.0
11.0
2.9
3.8
2.5
UNIT : mm/inch
A =10.40/0.409 Max.
B = 10.40/0.409Max.
C = 5.50/0.217Max.
D = 2.60/ 0.102
E = 5.50/ 0.217
F = 1.40/ 0.055
G = 2.90/ 0.114
H = 3.80/ 0.150
RECOMMENDED PAD PATTERNS
HMU1055-0R2 0.20 0.16 1.00 48.0 31.0
HMU1055-0R2LD 0.20 0.16 0.65 48.0 35.0
HMU1055-R25 0.25 0.20 1.00 36.0 31.0
HMU1055-0R3 0.30 0.24 1.00 30.0 31.0
HMU1055-0R4 0.40 0.32 1.30 32.0 25.0
HMU1055-R56 0.56 0.45 1.30 20.0 25.0
HMU1055-0R6 0.60 0.48 1.30 17.0 25.0
HMU1055-0R7 0.70 0.56 1.30 17.0 25.0
HMU1055-0R7HS 0.70 0.56 2.00 25.0 19.0
HMU1055-0R8 0.80 0.64 2.00 16.0 19.0
HMU1055-1R0 1.00 0.80 2.00 15.0 19.0
HMU1055-1R0HS 1.00 0.80 4.00 20.0 13.5
HMU1055-1R5 1.50 1.08 4.00 15.0 13.5
HMU1055-1R5HS 1.50 1.20 20% 6.80 22.0 11.0
HMU1055-2R2 2.20 1.65 4.80 12.0 12.5
HMU1055-2R2HS 2.20 1.76 6.80 14.0 11.0
HMU1055-2R5 2.50 2.00 4.80 7.8 12.5
HMU1055-3R0HS 3.00 2.40 9.60 12.0 8.5
HMU1055-4R7 4.70 3.76 11.00 8.0 8.0
HMU1055-5R7 5.70 4.56 11.00 5.8 8.0
RoHS compliant.
Low profile, SMD type.
High current.
Magnetic shielded.
High energy storage and low DCR.
Provided with embossed carrier tape packing.
Ideal for power source circuits, DC-DC converter, DC-AC inverters
inductor applications.
In addition to the standard versions shown here, customized inductors
are available to meet your exact requirements.