Delta Electronics HAH83 User manual

RECOMMENDED PAD PATTERNS
A
B
CE
D3.43 / 0.135
7.37 / 0.290
3.71 / 0.146
Mechanical Dimension :
Features
O
At 25 C, 100KHz, 1V
DELTA ELECTRONICS, INC.
(TAOYUAN PLANT CPBG)
86
252, SAN YING ROAD, KUEISAN INDUSTRIAL ZONE, TAOYUAN SHIEN, 333, TAIWAN, R.O.C.
TEL: [phone]; FAX: [phone]
http://www.deltaww.com
SMT Power Inductor
HAH83 Type
Electrical Characteristics :
UNIT : mm/inch
A = 7.50/ 0.295 Max.
B = 7.00 /0.276 Max.
C = 3.20 /0.126 Max.
D = 1.40 0.2 / 0.055 0.008
E = 1.50 0.254 / 0.059 0.01
rms
L
(uH)
Li
(uH)
I
(Adc)
o
(m ) MAX
DCR
sat
I
(Adc)
13
2
1. Lo is the initial inductance and the tolerance of inductance is 20%.
2. Isat is the DC current which cause the inductance drop to Li.
O
3. Irms is the DC current which cause the surface temperature of the part increase less than 45 C.
OO
4. Operating temperature : -40 C to 125 C ( including self-temperature rise ).
HAH83-0R1 0.10 0.070 1.7 60.0 32.50
HAH83-R15 0.15 0.105 2.5 52.0 26.00
HAH83-0R2 0.20 0.150 2.8 41.0 24.00
HAH83-R22 0.22 0.165 2.8 40.0 23.00
HAH83-R33 0.33 0.231 3.9 30.0 20.00
HAH83-R47 0.47 0.329 4.2 26.0 17.50
HAH83-R68 0.68 0.476 5.5 25.0 15.50
HAH83-R82 0.82 0.574 8.0 24.0 13.00
RoHS compliant.
Low profile, SMD type.
High current.
Magnetic shielded.
High energy storage and low DCR.
Provided with embossed carrier tape packing.
Ideal for power source circuits, DC-DC converter, DC-AC inverters
inductor applications.
In addition to the standard versions shown here, customized inductors
are available to meet your exact requirements.