Delta Electronics SIL630 User manual

DELTA ELECTRONICS, INC.
(TAOYUAN PLANT CPBG)
o
25 C: 100KHz, 0.1V
SMT Power Inductor
SIL630 Type
Magnetically shielded.
Ideal for power source circuits, DC-DC converter, DC-AC inverters
inductor application.
In addition to the standard versions shown here, customized inductors
are available to meet your exact requirements.
RoHS compliant.
Features
37
Electrical Characteristics:
0.00 0.01 0.10 1.00 10.00
CURRENT (A)
1.00
10.00
100.00
INDUCTANCE (uH)
5R3
6R2
8R2
100
120
150
180
220
270
330
390
470
560
680
820
101
4R2
3R0
2R6
252, SAN YING ROAD, KUEISAN INDUSTRIAL ZONE, TAOYUAN SHIEN, 333, TAIWAN, R.O.C.
TEL: [phone]; FAX: [phone]
http://www.deltaww.com
SIL630 - 1R2 1.2 0.013 3.50
SIL630 - 1R5 1.5 0.014 3.40
SIL630A - 1R5 1.5 0.016 3.50
SIL630 - 2R2 2.2 0.018 2.60
SIL630A - 2R2 2.2 0.022 3.00
SIL630B - 2R2 2.2 0.240 3.50
SIL630 - 2R6 2.6 0.018 2.60
SIL630 - 3R0 3.0 0.024 2.40
SIL630B - 3R0 3.0 0.028 3.30
SIL630 - 3R3 3.3 0.026 2.40
SIL630 - 4R2 4.2 0.031 2.20
SIL630C - 4R2 4.2 0.048 2.50
SIL630 - 4R7 4.7 0.037 2.05
SIL630B - 4R7 4.7 0.044 2.70
SIL630A - 4R7 4.7 0.045 2.20
SIL630 - 5R3 5.3 0.038 1.90
SIL630 - 6R2 6.2 0.045 1.80
SIL630B - 6R8 6.8 0.057 2.20
SIL630B - 7R6 7.6 0.067 2.00
SIL630 - 8R2 8.2 0.053 1.60
SIL630A - 8R2 8.2 0.060 1.60
SIL630 - 100 10.0 0.065 1.30
SIL630A - 100 10.0 0.070 1.50
SIL630B - 100 10.0 0.082 1.80
SIL630 - 120 12.0 0.076 1.20
SIL630 - 150 15.0 0.103 1.10
SIL630B - 150 15.0 0.130 1.50
SIL630 - 180 18.0 0.110 1.00
SIL630 - 220 22.0 0.122 0.90
SIL630B - 220 22.0 0.176 1.20
SIL630 - 270 27.0 0.175 0.85
SIL630 - 330 33.0 0.189 0.75
SIL630 - 390 39.0 0.212 0.70
SIL630 - 470 47.0 0.260 0.62
SIL630 - 560 56.0 0.305 0.58
SIL630 - 680 68.0 0.355 0.52
SIL630 - 820 82.0 0.463 0.42
SIL630 - 101 100.0 0.520 0.42
SIL630 - 471 470.0 3.600 0.19
1. Tolerance of inductance : 30%.
2. Irated is the DC current which cause the inductance drop less than 35% of its nominal inductance without current
o
and the surface temperature of the part increase less than 45 C.
oo
3. Operating temperature: -20 C to 105 C (including self-temperature rise).
2
Irated
(Adc)
PART NO.
DCR
( ) MAX
1
L
(uH)
6.3
1.5
C
D
B
A6.3
Mechanical Dimension:
UNIT:mm/inch
C = 3.0/ 0.118Max.
UNIT:mm/inch
A =6.0 / 0.236Max.
B = 6.0/ 0.236 Max.
D = 2.0 0.1 / 0.079 0.004
RECOMMENDED PAD PATTERNS