Delta Electronics SMT Power Inductor HCB1380 Installation instructions

7.0
13.5
E
D
C
A
XXX
B
7.0
UNIT : mm/inch
A = 13.50 / 0.531 Max.
B = 13.00 / 0.512 Max.
C = 8.00 / 0.315 Max.
D = 5.00 / 0.197
E = 2.50 / 0.098
Features
SMT Power Inductor
HCB1380 Type
Mechanical Dimension :
DELTA ELECTRONICS, INC.
(TAOYUAN PLANT CPBG) 252, SAN YING ROAD, KUEISAN INDUSTRIAL ZONE, TAOYUAN SHIEN, 333, TAIWAN, R.O.C.
TEL: [phone]; FAX: [phone]
http://www.deltaww.com
Electrical Characteristics : At 25 : 100KHz, 1V
oC
118
RECOMMENDED PAD PATTERNS
1. Tolerance of inductance is 20%.
2. Isat is the DC current which cause the inductance drop approximately 20% of its nominal inductance without current.
O
3. Irms is the DC current which cause the surface temperature of the part increase less than 45 C.
OO
4. Operating temperature : -20 C to 105 C ( including self-temperature rise ).
13
PART NO. Lo DCR Isat Irms
(nH) (m ) MAX (Adc) (Adc)
HCB1380-161 160 0.32 71 45
HCB1380-171 170 0.32 71 45
HCB1380-211 210 0.32 70 45
HCB1380-261 260 0.32 60 45
HCB1380-261H 260 0.53 11.3% 60 39
HCB1380-321 320 0.32 45 45
HCB1380H-321 320 0.32 60 60
HCB1380-361 360 0.32 40 45
HCB1380-361H 360 0.60 40 39
HCB1380-441 440 0.32 32 45
HCB1380-441D1 440 0.24 32 58
HCB1380-441D2 440 0.32 9.4% 32 45
2
RoHS compliant.
Low profile, SMD type.
High current.
Magnetic shielded.
High energy storage and low DCR.
Provided with embossed carrier tape packing.
Ideal for power source circuits, DC-DC converter, DC-AC inverters
inductor applications.
In addition to the standard versions shown here, customized inductors
are available to meet your exact requirements.