Delta Electronics SI415 User manual

SMT Power Inductor
SI415 & SI418Type
Features
DELTA ELECTRONICS, INC.
(TAOYUAN PLANT CPBG)
1
252, SAN YING ROAD, KUEISAN INDUSTRIAL ZONE, TAOYUAN SHIEN, 333, TAIWAN, R.O.C.
TEL: [phone]; FAX: [phone]
http://www.deltaww.com
RoHS compliant.
Low profile, SMD type.
Unshielded.
Self-leads, suitable for high density
High energy storage and low DCR.
Provided with embossed carrier tape packing.
Idel for power source circuits, DC-DC converter,DC-AC inverters
inductor applications.
In addition to the standard versions shown here, customized inductors
are available to meet your exact requirements.
mounting.
Electrical Characteristics: 25 100KHz, 0.1V
oC,
SI415 - 4R7 4.70 0.180 1.40 1.5
SI415 - 100 10.00 0.400 0.96 1.5
SI415 - 220 22.00 0.940 0.62 1.5
SI418 - R16 0.16 0.015 5.50 1.8
SI418 - 1R0 1.00 0.090 2.10 1.8
SI418 - 2R2 2.20 0.130 1.50 1.8
SI418 - 100 10.00 0.350 0.45 1.8
HEIGHT "C"
(mm) MAX
PART NO.
DCR
( ) MAX
L
(uH)
12
Irated
(Adc)
1. Tolerance of inductance : 20%.
2. Irated is the DC current which cause the inductance drop less than 10% of its nominal inductance without current
o
and the surface temperature of the part increase less than 45 C.
oo
3. Operating temperature: -20 C to 105 C (including self-temperature rise).
Mechanical Dimension:
3.6
D
A
C
0.6
4.0
B
UNIT:mm/inch
A =3.5 0.2 / 0.138 0.008
B = 3.1 0.2 / 0.122 0.008
D = 0.8 0.2 / 0.031 0.008
¡Ó
¡Ó
¡Ó
¡Ó
¡Ó
¡Ó
RECOMMENDED PAD PATTERNS