Delta Electronics SMT Power Inductor SIL720 User manual

DELTA ELECTRONICS, INC.
(TAOYUAN PLANT CPBG)
o
25 C: 100KHz, 0.1V
SMT Power Inductor
SIL720 & SIL725 Type
RoHS compliant.
Small size (6.6mm*6.6mm),Low profile, SMD type.
Magnetically shielded, suitable for high densitymounting.
High energy storageand low DCR.
Provided with embossedcarrier tape packing.
Idel for powersource circuits, DC-DCconverter,
DC-AC inverters inductorapplication.
In addition tothe standard versionsshown here,
customized inductors areavailable to meetyour exact requirements.
Features
40
Electrical Characteristics:
252, SAN YING ROAD, KUEISAN INDUSTRIAL ZONE, TAOYUAN SHIEN, 333, TAIWAN, R.O.C.
TEL: [phone]; FAX: [phone]
http://www.deltaww.com
SIL720 - 1R0 1.0 0.020 5.50 2.0
SIL720 - 1R5 1.5 0.027 4.50 2.0
SIL720 - 2R0 2.2 0.040 3.80 2.0
SIL720 - 2R7 2.7 0.049 3.30 2.0
SIL720 - 3R3 3.3 0.065 2.90 2.0
SIL720 - 4R4 4.4 0.070 2.40 2.0
SIL720 - 100 10.0 0.150 1.80 2.0
SIL720 - 470 47.0 0.720 0.80 2.0
SIL720 - 101 100.0 1.400 0.55 2.0
SIL725 - 3R3 3.3 0.043 2.90 2.5
SIL725 - 4R1 4.1 0.048 2.60 2.5
SIL725 - 100 10.0 0.150 1.60 2.5
SIL725 - 220 22.0 0.330 1.10 2.5
2
Irated
(Adc)
HEIGHT "C"
(mm) MAX
PART NO.
DCR
( ) MAX
1
L
(uH)
1. Tolerance of inductance : 30%.
2. Irated is the DC current which cause the inductance drop less than 35% of its nominal inductance without current
o
and the surface temperature of the part increase less than 45 C.
oo
3. Operating temperature: -20 C to 105 C (including self-temperature rise).
7.3
1.5
C
D
B
A7.3
Mechanical Dimension:
UNIT:mm/inchUNIT:mm/inch
A =7.0 / 0.276Max.
B = 7.0/ 0.276 Max.
D = 2.0 0.1 / 0.079 0.004
RECOMMENDED PAD PATTERNS