Delta Electronics THCN1510 User manual

DELTA ELECTRONICS, INC.
(TAOYUAN PLANT CPBG) 252, SAN YING ROAD, KUEISAN INDUSTRIAL ZONE, TAOYUAN SHIEN, 333, TAIWAN, R.O.C.
TEL: [phone]; FAX: [phone]
http://www.deltaww.com
151
Through Hole Power Inductors
THCN1510 Type
High current (lsat up to 70A ) though hole type.
Magnetically shielded, suitable for hight density mounting.
High energy storage and low DCR.
Ideal for power source circuits, DC-DC converter,
DC-AC inverters inductor application.
In addition to the standard versions shown here,
customized inductors are available to meet your exact requirements.
Features
Electrical Characteristics: At 25 : 100KHz, 1.0V
oC
DCR
(m ) MAX
I sat
(Adc)
2
I rms
(Adc)
3
L
(uH)
1
PART NO.
Mechanical Dimension:
UNIT:mm/inch
A =15.5/0.610 MAX.
B = 15.5/0.610 MAX.
C = 10.0/0.394 MAX
D = 11.5 0.5/0.453 0.020
E = 5.5 0.5/0.217 0.020
F = 2.5/0.098 MAX
G = 1.4/0.055 MAX
H = 3.4 0.5/0.134 0.002
A
B
F
C
H
E
G
D
1.7/0.066
3.0/0.118
11.5 0.5 / 0.453 0.020
5.5 0.5 / 0.217 0.002
THCN1510-0R3 0.3 0.8 70 40
THCN1510-0R5 0.5 1.0 60 30
THCN1510-0R6 0.6 1.0 40 30
THCN1510-0R9 0.9 2.5 35 25
THCN1510-1R2 1.2 2.5 30 25
THCN1510-1R5 1.5 3.2 25 22
THCN1510-2R2 2.2 3.6 22 18
THCN1510-3R3 3.3 6.0 19 13
THCN1510-4R7 4.7 6.0 9.0 13
1.Tolerance of inductance : 0.3~47uH 20%
2.Isat is the DC current which cause the inductance drop less than 20% of its nominal inductance without current
o
3.Irms is the DC current which cause the surface temperature of the part increase less than 45 C
oo
4.Operating temperature: -40 C to 125 C ( including self-temperature rise )
RECOMMENDED PAD PATTERNS