Delta Quick Rack WS1003 User manual

A
B
C
D
E
F
1
Assembly instructions WS1003
Quick Rack
Instant Storage Rack
x4 — Leg Tube
x4 — Extension Tube
x3 — Shelf
x2 — Top Tube
x4 — Collar
x2 — Joiner
Parts
A
B
C
D
E
F
WARNING
Insert the 4 leg tubes (rubber feet on bottom)
into the corners of a shelf.
NOTE:
Holes face
inwards.
No Tools required!
NOTE
Shelves can be mounted either way, as tray or at shelf.
2Slide on next shelf to rest on bottom.
Maximum load per shelf (spread evenly): 160lbs (75kgs)
SAFETY WARNING: Do not use as a step ladder. Never allow children to climb on rack.

Delta Cycle Corporation 36 York Avenue, Randolph, MA 02368 USA / 800-474-6615 / www.designbydelta.com
Need help?
Email us at [e-mail]
& we’ll help solve your issue.
Assembly video
Visit designbydelta.com/downloads
5Press the corners of middle shelf onto the 4 plastic
collars. Seat all corners of each shelf onto its plastic
collar to keep unit rigid.
EXPANDABLE Two spare joiners are included
for stacking extra racks.
TOP
3Connect the two top tubes
to the 4 extension tubes. 4Determine the desired height of the middle shelf and then slide shelf above the selected holes.
Attach the four plastic collars at the desired height.
“CLICK”
Tab ts inside
tube hole
Use joiners (included)
for stacking extra racks