DeltaLab CT-10 User manual

Chromatic
Clip-On Tuner
CT-10
Owner’s Manual
PRECAUTIONS/SAFETY
Environmental conditions
Using the tuner in these conditions may result
in tuner malfunction:
• Direct Sunlight
• Extreme temperature or humidity
• Extreme dust or dirt
• Proximity to magnetic fields
Battery
Turn the power switch off when not in use to
preserve battery life. Remove battery during
extended periods of non-use to prevent battery
leakage into the unit.
Interference
Operate this device at a suitable distance from
televisions and radios to prevent interference.
Handling
Do not apply excessive force to buttons or
switches on this device. Use of excessive force
may cause the device to malfunction.
Care
Do not use cleaning chemicals or cleaning
liquids on the surface of this device. Chemicals
may cause damage to the finish or display
screen. If cleaning is required, use a soft, dry
cloth to wipe the surface.
Foreign Matter
Avoid using this device in close proximity
to liquids. Liquids entering the device may
cause malfunction, electrical shock or fire.
Metal objects or particles can also cause
malfunction, electrical shock or fire.
This device complies with Part 15 of the FCC
rules. Operation is subject to the following
two conditions: (1) This device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired
operation.
This Class B digital apparatus complies with
Canadian ICES-003 CET.
One (1) Year Limited Warranty and Remedies
Subject to the limitations below, DeltaLab®
warrants to the original owner that the
components of this product are free from
defects in workmanship and materials,
subject to normal use and service, for
one (1) year from the date of purchase.
DELTALAB®MAKES NO OTHER WARRANTIES,
EXPRESS OR IMPLIED, INCLUDING, BUT
NOT LIMITED TO, ANY IMPLIED WARRANTY
OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE OR ANY IMPLIED
WARRANTY ARISING OUT OF A COURSE OF
DEALING, CUSTOM OR USAGE OF TRADE.
User is responsible for determining whether
this product is fit for a particular purpose and
suitable for user’s application. If the product
is defective within the warranty period, user’s
exclusive remedy and manufacturer’s sole
obligation will be, at its option, to replace the
product or refund the purchase price. Except
where prohibited by law, manufacturer and
seller will not be liable for any loss or damage
WARRANTY
arising from the product, whether direct, indirect,
special, incidental or consequential, regardless
of the legal theory asserted, including warranty,
contract, negligence or strict liability.
If you experience any problems with your
DeltaLab product, please contact our toll-free
customer service team at 1-855-450-3685.
California Prop 65 Warning: This product may
contain a chemical(s) known to the state of
California to cause cancer or birth defects or
other reproductive harm.
All trademarks and registered trademarks
mentioned herein are recognized as the
property of their respective holders.
Made in China 1107-9624
BATTERY
The DeltaLab CT-10 is a full-featured clip-on
tuner in an advanced, portable design. The
bright, clear display rotates for easy viewing
while performing on stage or in the studio.
PRODUCT DESCRIPTION
Each Deltalab tuner is shipped with a fresh
battery. If the screen flashes, replace the
standard CR2032 3V button-cell lithium
battery.
Rotate the battery cover counter-clockwise
until the compartment opens. Press on the
battery edge to pop the battery out. Replace
the battery and rotate cover clockwise until it
locks. Pay attention to polarity.
www.deltalabeffects.com

FEATURES
1. Power/Play Button – Turns power on or off.
2. Display – Shows note, calibration adjustments and tuning meter.
3. Calibration Frequency indicator – Displays current “A” note calibration.
4. Note Indicator – Displays current note being played.
5. Calibration Button – Adjusts tuner calibration.
6. Tuning Guide Indicator – Provides visual tuning reference for sharp, flat, and “in tune.”
7. Tuning Needle – Shows precise indication of current pitch .
8. Tuner Clip – Attaches tuner to instrument and picks up vibrations from instrument (for tuning).
9. Battery Cover
The CT-10 has a reversible tuner clip. This
allows the clip to be used on the front of
a guitar headstock or the back of a guitar
headstock on either right or left handed
instruments. Reversing the clip is a quick and
easy procedure.
1. Turn over the CT-10 so that you are looking
at the clip side of the tuner.
2. Hold the tuner body with one hand and
gently slide the clip away from the tuner
body with your other hand.
3. Rotate the tuner body clockwise 180
degrees.
4. Gently slide the clip back into the guides on
the other side of the rear of the CT-10.
TUNING IN METER MODE REVERSING THE TUNER CLIP
1. Clip the CT-10 on to your instrument in a
place where it will pickup the vibrations of
the instrument such as the headstock of
a guitar.
2. Press the power button to turn the CT-10
on. (Pressing the power button again will
turn off the CT-10.)
3. When the power is turned on, the reference
pitch defaults to A = 440 Hz . If you wish
to change the reference pitch (calibration),
press the Calibration button to increase the
reference pitch in 1 Hz steps over a range
of 415Hz -- 466 Hz. Once the pitch reaches
466Hz, it will start over at 415Hz.
4. Play a single note on your instrument. The
name of the nearest note will be displayed.
5. Adjust the tuning of your instrument so that
the meter moves to the 0 position (center)
and the center of the triangle fills in with
black. The tuning needle will be to the left
of center if your instrument is flat, or to the
right of center if your instrument is sharp.
SPECIFICATIONS
7
6
5
8
9
43
2
1
Indicator: LED Display
Tuning Range: A0(27.5 Hz) - C8(4186 Hz)
Tuning Mode: Vibration
Response Time: <20ms
Precision: +/- 1 cent
Calibration: 415Hz - 466Hz
Power Supply: 3 Volt
(CR2032 Lithium Battery)
Power Consumption: <16mA
Accessories: Owner’s Manual
Dimensions: 2.44”(62mm) Wide
x 1.3”(33mm) Deep x 1.5”(38mm) High
Weight: .91 oz (26g)