Deltapath Vanguard Professional S58 User manual

2. LED
The Light Emitting Diode (LED) emits lights on the phone. The LED color and status such as a blinking light or
solid light communicate different information.
Power Indicator A solid green light is observed when the phone is receiving power.
A blinking green light indicates there is an incoming call.
Line Keys
A solid green light is observed when you are on an active call and when dialing a number.
A blinking green light identifies the line with an incoming call.
No light indicates the line is idle.
3. Answer a Call
Use the handset, headset, or speaker to answer calls.
Handset Pickup the handset.
Headset Press the HEADSET button.
Speaker Press the SPEAKER button.
4. Place a Call
Place a call using the handset, headset, or speaker. During an active call, you can switch between handset,
headset, and speaker mode.
4.1 Handset
1. Pickup the handset.
2. Enter a number using the keypad.
3. Press #on the keypad or press the soft key, Send.
4.2 Headset
1. Press the HEADSET button.
2. Enter a number using the keypad.
3. Press #on the keypad or press the soft key, Send.
4.3 Speaker
1. Press the SPEAKER button.
2. Enter a number using the keypad.
3. Press #on the keypad or press the soft key, Send.
4.4 Make aCall from theHistory Log orPhonebook
Use the handset, headset, or speakerphone to place a call from your phone directories or history log.
5. End a Call
Handset Hang up the handset or press the soft key, Cancel.
Headset Press the soft key, Cancel.
Speaker Press the SPEAKER button or press the soft key, Cancel.
1. Press the soft key, History, located on the idle page or press Menu – History/Directory.
2. Press the up and down navigation keys to move to and select the number you want to call.
3. Press the soft key, Send.
6. Redial
Use the one touch button to dial the last number called.
1. Press the REDIAL button.
7. Hold and Resume a Call
You can place an active call on hold when you are using a handset, headset, or speaker.
1. Press the HOLD button or the soft key, Hold, during an active call.
2. Press the the HOLD button again or press the soft key, Resume, to continue with the call.
8. Mute and Unmute
1. Press the MUTE button to mute your microphone during a call.
2. Press once more to unmute your microphone.
9. Transfer a Call
There are three options when transferring a call.
9.1 Blind Transfer
In a blind transfer, a call is sent directly to another number. Whether or not the person you transferred spoke to
someone or received a busy signal and hung up will never be known.
1. Press the TRANSFER button or the soft key, Transfer, during an active conversation.
The call is placed on hold.
2. Enter the number you want to transfer the call to using the keypad.
3. Press the TRANSFER button or the soft key, Transfer.
9.2 Attended Transfer
In an attended transfer, the current call is placed on hold. A call is then placed to the transfer destination to
confirm whether the individual is available and will accept the transferred call.
1. Press the TRANSFER button or the soft key, Transfer, during an active conversation.
The call is placed on hold.
2. Enter the number you want to transfer the call to using the keypad or press the soft key, Send, or #.
3. If the call recipient will accept the transfer, press or the soft key, Transfer.
9.3 Semi-Attended Transfer
In a semi-attended transfer, a call is only transferred when the destination number is ringing.
1. Press the TRANSFER button or the soft key, Transfer, during an active conversation. The current call is
placed on hold.
2. Enter the number you want to transfer the call to using the keypad and then press #.
3. Press or the soft key, Transfer, to complete the transfer.
Note: You can reject a call by pressing the soft key, Reject.
10. Hold a 5-Way Conference Call
Initiate a 5-way conference call using the instructions and scenario below.
Andy (A) and Nick (B) are currently in a conversation. They want to share their ideas and consult with Eric (C),
Kyanna (D), and Kaden (E).
1. Andy (A) calls Nick (B).
2. Once (A) and (B) are in an active call, (A) presses the Hold button or the soft key, Hold.
3. (A) presses the soft key, New Call and then places a call to Eric (C).
4. Once (A) is in an active call with (C), (A) presses the Conference button
or the soft key, Conference, to start a 3-way call between (A), (B), (C).
5. (A) presses the Hold button or the soft key, Hold, to pause the 3-way conference call.
6. (A) presses the soft key, New Call, and then calls Kyanna (D).
7. Once (A) is in an active call with (D), (A) presses the Conference button or
the soft key, Conference to start a 4-way call between (A), (B), (C), and (D).
8. (A) presses the Hold button or the soft key, Hold, to pause the 4-way conference call.
9. (A) presses the soft key, New Call and then places a call to Kaden (E).
10. Once (A) is in an active call with (E), (A) presses the Conference button or the
soft key, Conference, to start a 5-way call between (A), (B), (C), (D), and (E).

Vanguard Professional S58™
QUICK START GUIDE
For use with Deltapath® UC 4.3
Thank you for choosing the Vanguard Professional S58™. The guide introduces you to the many features
of the phone and provides instructions on how to perform some of the most principal features.
WELCOME
1. Getting to Know the Vanguard Professional S58
Power Indicator
11. Adjusting the Position of the Phone Stand
The phone stand can be adjusted to either a 45° angle or a 55° angle. It can also be mounted on a wall.
When using the stand in the highest position or mounting the phone on the wall, use the Handset Hook
to secure the handset.
1. Remove the Handset Hook.
2. Rotate the Handset Hook until it is in the upside down position.
3. Replace the Handset Hook in the phone in the upside down position.
12. Connectivity Diagram
Line Keys
Messages
Headset
Mute
Speaker
Soft Keys
Conference
Hold
Transfer
Redial
Navigation Keys
Alphanumeric KeypadVolume Keys
Handset Hook
Place phone stand at a 45° or 55° angle
Vanguard Professional S58
Computer
AC Adapter
(Available for purchase and
optional if you are using PoE)
Network
Phone Jacks
Headset
Handset
For more information on the Vanguard Professional S58, please
contact your nearest Deltapath sales representative.
© 2018 Deltapath Inc. All rights reserved. Deltapath, the Deltapath logo, are registered trademarks of Deltapath, Inc. All other trademarks are property of their
respective owners. No portion hereof may be reproduced or transmitted in any form or by any means, for any purpose other than the recipient’s personal use,
without the express written permission of Deltapath. Deltapath reserves the right to change, modify, transfer, or otherwise revise this publication without notice.
UG-100029-Vanguard Professional S58-20180112
www.deltapath.com