Denkovi DAEnetIP3 User manual

DAEnetIP3 User Manual
-1-
DAEnetIP3
User Manual
Date: 02.11.2017
Describes DAEnetIP3 firmware version 2.0.0

DAEnetIP3 User Manual
-2-
Content
1. Basic features .........................................................................................................6
2. DAEnetIP3 PCB ......................................................................................................7
3. Technical parameters..............................................................................................8
4. Application examples...............................................................................................9
5. Default Settings.....................................................................................................13
5.1. Digital outputs (Port A) ...................................................................................13
5.2. Digital Inputs (Port B) .....................................................................................13
5.3. Analog Inputs (Port C)....................................................................................13
5.4. Serial Port.......................................................................................................14
5.5. System clock ..................................................................................................14
5.6. Admin.............................................................................................................14
5.7. Wi-Fi Settings.................................................................................................15
6. Web server............................................................................................................16
6.1. Overview ........................................................................................................16
6.2. Login page......................................................................................................17
6.3. Menu ..............................................................................................................18
7. Digital outputs port (Port A) ...................................................................................19
7.1. Port A web page.............................................................................................19
7.2. Setting the digital outputs...............................................................................19
7.3. Reading the digital outputs state (status) .......................................................19
7.4. PortA initial state ............................................................................................19
7.5. Port A modes..................................................................................................20
7.5.1. On/Off setting..........................................................................................20
7.5.2. On/Off setting and digital input................................................................21
7.5.3. On/Off setting and analog input...............................................................21
7.5.4. On/Off setting and schedule....................................................................22
7.5.5. On/Off setting and remote.......................................................................23
7.5.6. Inverting ..................................................................................................23
7.5.7. Inverting and digital input ........................................................................23
7.5.8. Inverting and analog input.......................................................................24
7.5.9. Inverting and schedule............................................................................25
7.5.10. Inverting and remote .............................................................................25
7.5.11. Pulses ...................................................................................................26
7.5.12. Pulses and digital input .........................................................................26
7.5.13. Pulses and analog input........................................................................27
7.5.14. Pulses and schedule .............................................................................28
7.5.15. Pulses and remote ................................................................................28
7.5.16. Timer.....................................................................................................29
7.5.17. Timer and digital input...........................................................................30
7.5.18. Timer and analog input..........................................................................30
7.5.19. Timer and remote..................................................................................31
7.6. “ON” value ......................................................................................................31
7.7. “OFF” value ....................................................................................................31
7.8. “Delay” value ..................................................................................................31
7.9. “Mode” value ..................................................................................................32
7.10. “Time 1” value ..............................................................................................32
7.11. “Time 2” value ..............................................................................................32
7.12. Description ...................................................................................................32

DAEnetIP3 User Manual
-3-
8. Digital Inputs Port (Port B).....................................................................................33
8.1. Port B web page.............................................................................................33
8.2. Reading the digital inputs...............................................................................33
8.3. Port B modes..................................................................................................33
8.3.1. Simple reading ........................................................................................33
8.3.2. Set output during rising edge ..................................................................33
8.3.3. Set output during falling edge..................................................................34
8.3.4. “Port A pin” value.....................................................................................34
8.3.5. “Remote” value........................................................................................34
8.3.6. Description ..............................................................................................34
9. Analog Inputs Port (Port C)....................................................................................35
9.1. Port C Web page............................................................................................35
9.2. Reading the analog inputs..............................................................................35
9.3. Refresh time...................................................................................................36
9.4. Low Threshold (LT) ........................................................................................37
9.5. High Threshold (HT).......................................................................................37
9.6. Low Hysteresis (LH).......................................................................................37
9.7. High Hysteresis (HH)......................................................................................37
9.8. Rules..............................................................................................................37
9.9. Minimum value ...............................................................................................37
9.10. Maximum value ............................................................................................37
9.11. Label.............................................................................................................37
9.12. Analog Input Mode .......................................................................................37
9.12.1. Simple reading ......................................................................................37
9.12.2. Low........................................................................................................38
9.12.3. High.......................................................................................................38
9.12.4. Acc........................................................................................................39
9.12.5. Low/High ...............................................................................................39
9.12.6. “Port A pin” value...................................................................................40
9.12.7. “Remote” value......................................................................................40
9.12.8. Description ............................................................................................40
10. Distributed (Box-to-box) mode.............................................................................41
10.1. Configuring the digital outputs......................................................................41
10.2. Configuring the digital/analog inputs.............................................................41
10.3. Configuring the network parameters.............................................................42
10.3.1. Ethernet (Wi-Fi) IP address, MASK and Gateway.................................42
10.3.2. Remote server IP ..................................................................................42
10.3.3. Local Port Range...................................................................................42
10.3.4. Remote server Port...............................................................................42
10.3.5. Working mode.......................................................................................42
10.4. Examples......................................................................................................42
10.4.1. Example 1: Two DAEnetIP3 controllers connected via UTP cable........42
10.4.2. Example 2: Two DAEnetIP3 controllers connected via WLAN..............43
10.4.3. Example 3: Two DAEnetIP3 controllers connected via LAN .................44
10.4.4. Example 4: Configuration “5 to 1” over LAN..........................................46
10.4.5. Example 5: Configuration “5 to 1” over WLAN ......................................48
10.4.6. Example 6: Mixed configuration ............................................................50
10.4.7. Example 7: Ring configuration over WLAN ...........................................52
10.4.8. Custom examples..................................................................................53

DAEnetIP3 User Manual
-4-
11. RC4 Encryption ...................................................................................................55
12. UART (Serial Port)...............................................................................................57
12.1. Overview ......................................................................................................57
12.2. Applications..................................................................................................58
12.3. UART (Serial Port) web server page............................................................59
12.4. Configuration................................................................................................59
13. UART <-> TCP/IP bridge.....................................................................................60
14. Real Time Clock (RTC)........................................................................................62
14.1. RTC Web page.............................................................................................62
14.2. Auto-synchronization from NTP....................................................................62
15. E-mail notifications .............................................................................................63
16. Wi-Fi 802.11 interface..........................................................................................64
17. DAEnetIP3 data application protocol...................................................................65
17.1. TCP/IP socket based protocol......................................................................66
17.2. Telnet protocol..............................................................................................69
17.3. Serial protocol ..............................................................................................70
17.4. Virtual Serial Port .........................................................................................71
17.5. HTTP API commands...................................................................................72
17.6. CRC16 (Modbus)..........................................................................................73
17.6.1. CRC16 case studies..............................................................................73
17.6.2. CRC16 performing ................................................................................75
17.6.3. CRC16 checking ...................................................................................76
17.7. Error codes...................................................................................................77
17.8. Protocol data units (PDU) description ..........................................................77
17.8.1. Function codes for digital output port (Port A)......................................77
17.8.2. Commands for digital input port (Port B)...............................................79
17.8.3. Commands for analog input port (Port C)..............................................80
17.8.4. Commands for system clock ................................................................82
17.8.5. Commands for serial port......................................................................83
17.8.6. Commands for admin settings...............................................................84
17.8.7. Commands for Wi-Fi settings (optional) ................................................88
17.8.8. System commands................................................................................90
18. Appendix 1. Connectors and LED indicators.......................................................91
18.1. DAEnetIP3 ports view...................................................................................91
18.2. DAEnetIP3 ports description ........................................................................92
18.3. DAEnetIP3 power jack and RJ-45 port.........................................................94
18.4. DAEnetIP3 Led indicators ............................................................................95
18.5. DAEnetIP3 Wi-Fi led indicator and external antenna connector...................96
19. Appendix 2. Connecting the controller to LAN/WLAN/WAN ................................97
19.1. UTP cable connection with PC for first time .................................................97
19.2. UTP cable connection with router.................................................................97
19.3. Wi-Fi connection with PC for first time..........................................................98
19.4. Wi-Fi connection with router.........................................................................99
20. Appendix 3. Port-forwarding..............................................................................100
21. Appendix 4. Android application for DAEnetIP3 ................................................101
22. Appendix 5. I/O Ports.........................................................................................102
22.1. Digital outputs (PortA) ................................................................................102
22.2. Digital inputs (PortB)...................................................................................103
22.3. Analog inputs (PortC).................................................................................104

DAEnetIP3 User Manual
-5-
22.3.1. Connecting LM335Z temperature sensor............................................105
22.3.2. Connecting LM35DZ temperature sensor ...........................................106
22.3.3. Connecting MCP9700A temperature sensor.......................................107
22.3.4. Connecting HIH-4000 humidity sensor................................................108
22.3.5. Connecting SHARP GP2Y0A21YK0F distance sensor.......................109
23. Appendix 6. Reset the controller........................................................................110
23.1. Hardware (1) ..............................................................................................110
23.2. Hardware (2) ..............................................................................................110
23.3. Reset via Web............................................................................................110
23.4. Reset via UART command.........................................................................110
23.5. Reset via Telnet command.........................................................................110
23.6. Reset via DAEnetIP3 socket command......................................................110
24. Appendix 7. Loading the default settings...........................................................111
24.1. Hardware loading default settings ..............................................................111
24.2. Web loading default settings ......................................................................111
24.3. Loading default settings via UART command.............................................112
24.4. Loading default settings via Telnet command ............................................112
24.5. Loading default settings via DAEnetIP3 socket command .........................112
25. Appendix 8. Firmware upgrade..........................................................................113
26. Appendix 9. How to create Virtual Serial Port for DAEnetIP3............................114
27. Appendix 10. Example commands ....................................................................117
27.1. Commands for Digital Outputs (Port A)......................................................117
27.2. Commands for Digital Inputs (Port B).........................................................118
27.3. Commands for Analog Inputs (Port C)........................................................120
28. Appendix 11. Mechanical draw..........................................................................121
29. Appendix 12. Ordering codes............................................................................122
29.1. DAEnetIP3 –ET.........................................................................................122
29.2. DAEnetIP3 –WT........................................................................................123
29.3. DAEnetIP3 –EB.........................................................................................124
29.4. DAEnetIP3 –WB........................................................................................125

DAEnetIP3 User Manual
-6-
1. Basic features
DAEnetIP3 is multifunctional standalone Ethernet / Wireless device for remote
management and control with Virtual Serial Port, TCP/IP socket based protocol,
HTTP API, Web, Telnet and serial commands access. Many controllers can be
connected over LAN/WLAN/WAN or serial network. It can work standalone (without
PC). Several such controllers can work together (in distributed WAN/WLAN network)
and inputs of one controller can control outputs of another one. It can be used in
combination with relay boards and input/output boards –some of them may be found
on http://www.denkovi.com/
10/100 Mbit Ethernet interface with Link Led. Auto MDIX;
Wireless Wi-Fi 802.11 b/g interface supporting WEP64, WEP128,
WPA/TKIP - Personal and WPA2/AES - Personal (Hot-spot is not
supported)
UART interface for RS232/RS485 serial connection with other such
controllers. UART can be used also for configuration of the parameters;
Power supply: 7.5VDC...25VDC;
Consumption 90 mA (170 mA with Wi-Fi interface) on 12 VDC;
Consumption 70 mA (120 mA with Wi-Fi interface) on 24 VDC;
1 x 16 digital outputs (0 –3.3V);
1 x 8 digital inputs (0 –3.3V);
1 x 8 analog inputs. Referent voltage: 2.048 V, resolution: 10 bits;
On boot the outputs are set with states before reset;
Built in RTC (Real Time Clock). It can be synchronized via NTP manually
or automatically each 6 hours;
Capacitor power backup keeps time for days during power failure;
Virtual Serial Port - it may be accessed with Serial RS232 commands
over TCP/IP network;
Integrated WEB server with authorization and features like Ajax
parameters reading;
Telnet commands;
HTTP API commands;
TCP/IP ASCII protocol with optional RC4 encryption;
All the network ports can be defined by the user;
Supports ICMP (ping);
19 modes for I/O lines such as inverting, timer, pulses, setting output via
input and switch ON/OFF according particular time (scheduling);
Any input may be referred to control any output of this or another
controller in the TCP/IP network;
Linearization for the analog inputs;
Box-to-Box (distributed) mode;
SMTP with authentication (SSL is not supported);
E-mail notifications for various events;
IP address protection;
Power and status led;
Size: 108mm x 45mm x 24mm;
Working temperature range: -20 to +70 °C;

DAEnetIP3 User Manual
-7-
2. DAEnetIP3 PCB

DAEnetIP3 User Manual
-8-
3. Technical parameters Table 1. Technical parameters
Parameter
Value
Digital outputs count
16
Analog inputs count
8 (10bit ADC, Vref=2.048V) with 100
kOhm pull-down resistor to GND
Digital inputs count
8
Default settings jumper
Yes
LED (Link, Status,
Power On)
Yes
Save digital output states
Yes
Digital configurable ADC filter
Yes
Network parameters
IP/Mask/Default gateway
IP lock (protection)
Yes
Telnet for configuration
Yes
Virtual Serial Port (VSP)
Yes
TCP/IP socket based protocol for direct
configuration over LAN, WLAN, WAN
Yes
Web server for configuration/access
Yes
Configuration over Serial port (UART)
Yes
Enable/disable Telnet
Yes
Enable/disable RC4 (password
protection)
Yes
Size
108mm x 45mm x 24mm
Power supply voltage
7.5VDC to 25VDC
CPU power supply (output level 3.3VDC)
3.3VDC

DAEnetIP3 User Manual
-9-
4. Application examples
DAEnetIP3 has 16 digital outputs that are suitable for controlling electrical devices
over the local network or Internet. Using its Wi-Fi 802.11 communication module it is
possible to control different electrical devices wireless.
Figure 1. Controlling electrical devices with DAEnetIP3 remotely
DAEnetIP3 has 8 analog inputs (Vref=2.048V / 10bit resolution) and 8 digital
inputs (0 –3.3V). Each sensor producing signal compatible with these inputs levels is
suitable. Once, the information (over LAN, WLAN or WAN) from sensors is gathered,
it may be received from PC (server) and saved for processing.
Figure 2. Tracking sensors

DAEnetIP3 User Manual
-10-
DAEnetIP3 can operate as simple alarm. When some input change its state (or
cross some threshold –for analog inputs), particular output changes its state also.
Figure 3. Alarm with DAEnetIP3
DAEnetIP3 gives possibilities to built up to 8 thermostats, using all the 8 analog
inputs and 8 of the digital outputs. The flexibility of DAEnetIP3 allows to attach each
analog input to each digital output. The combination of different I/O modes makes
several variations for the thermostat. Each thermostat can be tracked/configured
easily via web browser. The whole process of course may be tracked/adjusted also
via Telnet, TCP/IP socket and UART.
Figure 4. Web based thermostat based on DAEnetIP3, temperature sensor and relay board