Denon AVR-2809CI User manual

AV SURROUND RECEIVER
AVR-2809CI
Owner’s Manual

I
nSAFETY PRECAUTIONS
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of
uninsulated “dangerous voltage” within the product’s enclosure
that may be of sufficient magnitude to constitute a risk of electric
shock to persons.
The exclamation point within an equilateral triangle is intended
to alert the user to the presence of important operating
and maintenance (servicing) instructions in the literature
accompanying the appliance.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
SAFETY INSTRUCTIONS
1. Read Instructions – All the safety and operating instructions should be read
before the product is operated.
2. Retain Instructions – The safety and operating instructions should be
retained for future reference.
3. Heed Warnings – All warnings on the product and in the operating
instructions should be adhered to.
4. Follow Instructions – All operating and use instructions should be followed.
5. Cleaning – Unplug this product from the wall outlet before cleaning. Do not
use liquid cleaners or aerosol cleaners.
6. Attachments – Do not use attachments not recommended by the product
manufacturer as they may cause hazards.
7. Water and Moisture – Do not use this product near water – for example,
near a bath tub, wash bowl, kitchen sink, or laundry tub; in a wet basement;
or near a swimming pool; and the like.
8. Accessories – Do not place this product on an unstable cart, stand, tripod,
bracket, or table. The product may fall, causing serious injury to a child or
adult, and serious damage to the product. Use only with a cart, stand,
tripod, bracket, or table recommended by the manufacturer, or sold with the
product. Any mounting of the product should
follow the manufacturer’s instructions, and should
use a mounting accessory recommended by the
manufacturer.
9. A product and cart combination should be moved
with care. Quick stops, excessive force, and
uneven surfaces may cause the product and cart
combination to overturn.
10. Ventilation – Slots and openings in the cabinet are provided for ventilation
and to ensure reliable operation of the product and to protect it from
overheating, and these openings must not be blocked or covered. The
openings should never be blocked by placing the product on a bed, sofa,
rug, or other similar surface. This product should not be placed in a built-in
installation such as a bookcase or rack unless proper ventilation is provided
or the manufacturer’s instructions have been adhered to.
11. Power Sources – This product should be operated only from the type of
power source indicated on the marking label. If you are not sure of the type
of power supply to your home, consult your product dealer or local power
company. For products intended to operate from battery power, or other
sources, refer to the operating instructions.
12. Grounding or Polarization – This product may be equipped with a polarized
alternating-current line plug (a plug having one blade wider than the other).
This plug will fit into the power outlet only one way. This is a safety feature.
If you are unable to insert the plug fully into the outlet, try reversing the
plug. If the plug should still fail to fit, contact your electrician to replace your
obsolete outlet. Do not defeat the safety purpose of the polarized plug.
13. Power-Cord Protection – Power-supply cords should be routed so that they
are not likely to be walked on or pinched by items placed upon or against
them, paying particular attention to cords at plugs, convenience receptacles,
and the point where they exit from the product.
15. Outdoor Antenna Grounding – If an outside antenna or cable system is
connected to the product, be sure the antenna or cable system is grounded
so as to provide some protection against voltage surges and built-up static
charges. Article 810 of the National Electrical Code, ANSI/NFPA 70, provides
information with regard to proper grounding of the mast and supporting
structure, grounding of the lead-in wire to an antenna discharge unit, size
of grounding conductors, location of antenna-discharge unit, connection to
grounding electrodes, and requirements for the grounding electrode. See
Figure A.
16. Lightning – For added protection for this product during a lightning storm,
or when it is left unattended and unused for long periods of time, unplug it
from the wall outlet and disconnect the antenna or cable system. This will
prevent damage to the product due to lightning and power-line surges.
17. Power Lines – An outside antenna system should not be located in the
vicinity of overhead power lines or other electric light or power circuits, or
where it can fall into such power lines or circuits. When installing an outside
antenna system, extreme care should be taken to keep from touching such
power lines or circuits as contact with them might be fatal.
18. Overloading – Do not overload wall outlets, extension cords, or integral
convenience receptacles as this can result in a risk of fire or electric shock.
19. Object and Liquid Entry – Never push objects of any kind into this product
through openings as they may touch dangerous voltage points or short-out
parts that could result in a fire or electric shock. Never spill liquid of any kind
on the product.
20. Servicing – Do not attempt to service this product yourself as opening or
removing covers may expose you to dangerous voltage or other hazards.
Refer all servicing to qualified service personnel.
21. Damage Requiring Service – Unplug this product from the wall outlet
and refer servicing to qualified service personnel under the following
conditions:
a) When the power-supply cord or plug is damaged,
b) If liquid has been spilled, or objects have fallen into the product,
c) If the product has been exposed to rain or water,
d) If the product does not operate normally by following the operating
instructions. Adjust only those controls that are covered by the operating
instructions as an improper adjustment of other controls may result in
damage and will often require extensive work by a qualified technician to
restore the product to its normal operation,
e) If the product has been dropped or damaged in any way, and
f) When the product exhibits a distinct change in performance – this
indicates a need for service.
22. Replacement Parts – When replacement parts are required, be sure the
service technician has used replacement parts specified by the manufacturer
or have the same characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock, or other hazards.
23. Safety Check – Upon completion of any service or repairs to this product,
ask the service technician to perform safety checks to determine that the
product is in proper operating condition.
24. Wall or Ceiling Mounting – The product should be mounted to a wall or
ceiling only as recommended by the manufacturer.
25. Heat – The product should be situated away from heat sources such as
radiators, heat registers, stoves, or other products (including amplifiers) that
produce heat.
FIGURE A
EXAMPLE OF ANTENNA GROUNDING
AS PER NATIONAL
ELECTRICAL CODE "/5&//"
-&"%*/
8*3&
(306/%
$-".1
&-&$53*$
4&37*$&
&26*1.&/5
"/5&//"
%*4$)"3(&6/*5
/&$4&$5*0/
(306/%*/($0/%6$5034
/&$4&$5*0/
(306/%$-".14
108&34&37*$&(306/%*/(
&-&$530%&4:45&.
/&$"351"35)
/&$/"5*0/"-&-&$53*$"-$0%&

II
• Avoid high temperatures.
Allow for sufficient heat dispersion when
installed in a rack.
• Eviter des températures élevées.
Tenir compte d’une dispersion de chaleur
suffisante lors de l’installation sur une
étagère.
• Handle the power cord carefully.
Hold the plug when unplugging the cord.
• Manipuler le cordon d’alimentation avec
précaution.
Tenir la prise lors du débranchement du
cordon.
• Keep the unit free from moisture, water,
and dust.
• Protéger l’appareil contre l’humidité, l’eau
et la poussière.
• Unplug the power cord when not using the
unit for long periods of time.
• Débrancher le cordon d’alimentation
lorsque l’appareil n’est pas utilisé pendant
de longues périodes.
* (For apparatuses with ventilation holes)
• Do not obstruct the ventilation holes.
• Ne pas obstruer les trous d’aération.
• Do not let foreign objects into the unit.
• Ne pas laisser des objets étrangers dans
l’appareil.
• Do not let insecticides, benzene, and
thinner come in contact with the unit.
• Ne pas mettre en contact des insecticides,
du benzène et un diluant avec l’appareil.
• Never disassemble or modify the unit in
any way.
• Ne jamais démonter ou modifier l’appareil
d’une manière ou d’une autre.
nNOTE ON USE / OBSERVATIONS RELATIVES A L’UTILISATION
FCC INFORMATION (For US customers)
1. PRODUCT
This product complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this
product may not cause harmful interference, and (2) this product must accept any interference received, including
interference that may cause undesired operation.
2. IMPORTANT NOTICE: DO NOT MODIFY THIS PRODUCT
This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements.
Modification not expressly approved by DENON may void your authority, granted by the FCC, to use the product.
3. NOTE
This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation.
This product generates, uses and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this product does cause harmful interference to radio or
television reception, which can be determined by turning the product OFF and ON, the user is encouraged to try to
correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the product into an outlet on a circuit different from that to which the receiver is connected.
• Consult the local retailer authorized to distribute this type of product or an experienced radio/TV technician for
help.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

Accessories ·····················································································2
Cautions on Handling·····································································3
Cautions on Installation·································································3
About the Remote Control Unit····················································3
Inserting the Batteries ···································································3
Operating Range of the Remote Control Unit································ 3
Part Names and Functions ···························································· 4
Front Panel····················································································· 4
Display ···························································································5
Rear Panel······················································································ 6
Remote Control Unit ······································································7
Preparations····················································································8
Cables Used for Connections ························································8
Video Conversion Function ····························································9
About onscreen displays due to input signals································ 9
Speaker Connections ·····································································9
Speaker Installation········································································ 9
Speaker Connections ···································································10
Connecting Equipment with HDMI Connectors ························ 11
Connecting the Monitor·······························································12
Connecting the Playback Components ······································ 12
Blu-ray Disc Player / DVD Player ·················································12
Record Player··············································································· 13
CD Player ·····················································································13
iPod®····························································································13
TV/CABLE Tuner ··········································································14
Satellite Receiver ·········································································14
Connecting the Recording Components ···································· 15
Digital Video Recorder ·································································15
Video Cassette Recorder ·····························································15
CD Recorder / MD Recorder / Tape Deck····································16
Connections to Other Devices·····················································16
Video Camera / Game Console ···················································· 16
Component with Multi-channel Output Connectors ···················· 16
External Power Amplifier ·····························································17
Antenna Terminals ·······································································17
XM Connector·············································································· 18
SIRIUS Connector ········································································18
Multi-zone ····················································································19
External Controller ·······································································19
Connecting the Power Cord ························································ 20
Once Connections are Completed ·············································· 20
Preparations··················································································23
Auto Setup····················································································24
aStart Menu··············································································24
sParameter Check ····································································26
Error Messages············································································26
Speaker Setup ··············································································27
aSpeaker Configuration·····························································27
sSubwoofer Setup····································································28
dDistance··················································································28
fChannel Level ·········································································28
gCrossover Frequency······························································29
hFront Speaker Setup ·······························································29
HDMI Setup···················································································29
aColor Space·············································································29
sRGB Range ·············································································29
dAuto Lipsync ···········································································29
fHDMI Audio Out ·····································································30
gHDMI Control··········································································30
hPower Off Control···································································30
Audio Setup ··················································································30
aEXT. IN Subwoofer Level························································30
s2ch Direct/Stereo····································································30
dDolby Digital Setup ·································································31
fAuto Surround Mode ······························································31
gEQ Preset················································································31
ZONE Setup ··················································································31
aZONE2 Setup··········································································31
sZONE3 Setup··········································································31
Option Setup·················································································32
aAmp Assign·············································································32
sVolume Control ·······································································33
dSource Delete ·········································································33
fOn-Screen Display ··································································33
gQuick Select Name ·································································34
hTrigger Out··············································································34
jRemote ID Setup ····································································34
k232C Port················································································34
lDisplay ····················································································34
A0 Setup Lock··············································································34
Operations·····················································································20
Example of Display of Default Values ········································ 21
Examples of On-screen Display and Front Display ···················21
Menu Map ·····················································································22
nContents
Getting Started
Connections
Menu Operations
Auto Setup
Manual Setup
Settings Related to Playing Input Sources ································ 36
a Auto Preset·············································································36
s Preset Skip··············································································36
d Preset Name···········································································36
f Video·······················································································36
g Input Mode ·············································································37
h Rename···················································································38
j Source Level ···········································································38
k Assign ·····················································································38
l iPod·························································································39
A0 Antenna Aiming ······································································39
A1 Parental Lock ··········································································39
Input Setup
Adjusting the parameters····························································42
Surround Parameter·····································································43
Surround Parameter····································································· 43
Tone ····························································································· 45
Audyssey Settings ·······································································45
RESTORER ··················································································47
Night Mode ··················································································47
Audio Delay·················································································· 47
q Standard Playback ·································································· 40
Surround Playback of 2-channel Sources ··································40
Playing Multi-channel Sources (Dolby Digital, DTS, etc.)···········41
w DSP Simulation Playback ·······················································41
e Direct Playback ········································································41
r Stereo Playback·······································································42
Playback in the PURE DIRECT Mode ········································42
Surround Modes
Parameter

Status ····························································································48
aMAIN ZONE············································································48
sZONE2/ZONE3········································································48
Audio Input Signal········································································48
HDMI Information·········································································49
aHDMI Signal Information ························································49
sHDMI Monitor Information ·····················································49
Auto Surround Mode ··································································· 49
Quick Select ··················································································49
Preset Station ···············································································49
Information


Connections Setup Playback Remote Control Multi-zone Information Troubleshooting Specifications
Main Remote Control Unit (RC-1102)··········································61
Operating DENON Audio Components········································ 61
Presetting·····················································································61
Operating Preset Components ····················································61
Setting the Remote ID ·································································64
Learning Function ········································································64
System Call Function ···································································65
Punch Through Function ······························································65
Setting the Time the Backlight Stays Lit······································65
Adjusting the Backlight’s Brightness ···········································66
Resetting the Main Remote Control Unit ····································66
Sub Remote Control Unit (RC-1106)···········································66
Preparations··················································································50
Turning the Power On··································································50
Selecting the Input Source···························································50
Operations During Playback·························································50
Playing Video and Audio Equipment··········································51
Basic Operation············································································51
Listening to FM/AM Broadcasts ················································· 51
Basic Operation············································································51
Presetting Radio Stations (Preset Memory)································· 51
Listening to Preset Stations·························································52
Direct Frequency Tuning·······························································52
Listening to XM Satellite Radio Programs·································52
Basic Operation············································································52
Checking the XM Signal Strength and Radio ID··························· 53
Presetting Radio Channels (Preset Memory)·······························53
Listening to Preset Channels ·······················································53
Searching Categories ···································································54
Accessing XM Radio Channel Directly·········································54
Listening to SIRIUS Satellite Radio Programs···························54
Basic Operation············································································54
Checking the SIRIUS Signal Strength and Radio ID·····················54
Presetting Radio Channels (Preset Memory)·······························54
Listening to Preset Channels ·······················································54
Searching Categories ···································································55
Accessing SIRIUS Satellite Radio Channel Directly ·····················55
Parental Lock ···············································································55
iPod®Playback·············································································55
Basic Operation············································································55
Listening to Music ·······································································56
Viewing Still Pictures or Videos on the iPod ································56
Playback Remote Control Unit Operations
Multi-zone Settings with the Amp Assign Function·················67
Multi-zone Settings and Operations with Zone Output··········· 68
Multi-zone Operations ·································································69
Turning the Power On and Off·····················································69
Selecting the Input Source···························································69
Adjusting the Volume···································································69
Turning off the Sound Temporarily ··············································69
Other Information···························································70
Troubleshooting·······························································78
Specifications····································································82
List of preset codes·····························End of this manual

Check that the following parts are supplied with the product.
Thank you for purchasing this DENON product. To ensure proper
operation, please read this owner’s manual carefully before using the
product.
After reading them, be sure to keep them for future reference.
Getting Started
Accessories
yt i
Q2Q1Q0
Other Operations··········································································57
Playing Super Audio CD ·······························································57
Recording on an External Equipment (REC OUT mode) ··············57
Convenient Functions ··································································58
HDMI Control Function ································································58
Channel Level ··············································································59
Fader Function ·············································································59
Quick Select Function ··································································60
Personal Memory Plus Function ··················································60
Last Function Memory································································· 60
Backup Memory···········································································60
Resetting the Microprocessor ·····················································60
Other Operations and Functions
Amp Assign / Multi-zone Connections and
Operations
qOwner’s manual ...................................................................... 1
w Warranty (for North America model only) ................................ 1
eGetting started ........................................................................ 1
rService station list ................................................................... 1
tPower cord (Cord length: Approx. 6.2 ft / 1.9 m)..................... 1
yMain remote control unit (RC-1102) ........................................ 1
uLR6/AA batteries (for RC-1102) ............................................... 2
iSub remote control unit (RC-1106).......................................... 1
oR03/AAA batteries (for RC-1106)............................................. 2
Q0 FM indoor antenna .................................................................. 1
Q1 AM loop antenna ..................................................................... 1
Q2 Setup microphone
(DM-A409, Cord length: Approx. 25 ft / 7.6 m)........................ 1
Getting Started


Connections Setup Playback Remote Control Multi-zone Information Troubleshooting Specifications
• Before turning the power switch on
Check once again that all connections are correct and that there are
no problems with the connection cables.
• Power is supplied to some of the circuitry even when the unit is
set to the standby mode. When traveling or leaving home for long
periods of time, be sure to unplug the power cord from the power
outlet.
• About condensation
If there is a major difference in temperature between the inside of
the unit and the surroundings, condensation (dew) may form on
the operating parts inside the unit, causing the unit not to operate
properly.
If this happens, let the unit sit for an hour or two with the power
turned off and wait until there is little difference in temperature
before using the unit.
• Cautions on using mobile phones
Using a mobile phone near this unit may result in noise. If so, move
the mobile phone away from this unit when it is in use.
• Moving the unit
Turn off the power and unplug the power cord from the power
outlet.
Next, disconnect the connection cables to other system units before
moving the unit.
• Note that the illustrations in these instructions may differ from the
actual unit for explanation purposes.
Cautions on Handling
Note:
For proper heat dispersal, do not install this unit in a confined
space, such as a bookcase or similar enclosure.
Cautions on Installation
In addition to the AVR-2809CI, the included main remote control unit
(RC-1102) can also be used to operate the equipment listed below.
q DENON system components
w Non-DENON system components
• By setting the preset memory (vpage 61 ~ 63)
• By using the learning function (vpage 64)
About the Remote Control Unit
Inserting the Batteries
NOTE
• Replace the batteries with new ones if the set does not operate
even when the remote control unit is operated close to the unit.
• The supplied batteries are only for verifying operation.
• When inserting the batteries, be sure to do so in the proper direction,
following the “q” and “w” marks in the battery compartment.
• To prevent damage or leakage of battery fluid:
• Do not use a new battery together with an old one.
• Do not use two different types of batteries.
• Do not attempt to charge dry batteries.
• Do not short-circuit, disassemble, heat or dispose of batteries in
flames.
• If the battery fluid should leak, carefully wipe the fluid off the inside
of the battery compartment and insert new batteries.
• Remove the batteries from the remote control unit if it will not be in
use for long periods.
• When replacing the batteries, have the new batteries ready and
insert them as quickly as possible.
bNote
bWall b
b
qLift the clasp and
remove the rear cover.
ePut the rear cover back on.
(RC-1102) (RC-1106)
LR6/AA R03/AAA
wLoad the two batteries
properly as indicated
by the marks in the
battery compartment.
(RC-1102) (RC-1106)
30°
30°
Approx. 23 feet / 7 m
Operating Range of the Remote Control
Unit
Point the remote control unit at the remote sensor when operating it.
NOTE
The set may function improperly or the remote control unit may not
operate if the remote control sensor is exposed to direct sunlight,
strong artificial light from an inverter type fluorescent lamp or infrared
light.
or
(RC-1102)
(RC-1106)
Getting Started


Connections Setup Playback Remote Control Multi-zone Information Troubleshooting Specifications
For buttons not explained here, see the page indicated in parentheses ( ).
Part Names and Functions
Front Panel
q w e r
to i u y
Q0
Q1
Q2 Q3 Q4 Q5
qPower operation button (ON/STANDBY) ····························· (50)
wPower indicator ······································································· (50)
ePower switch (hON jOFF) ·················································· (50)
rQUICK SELECT buttons / indicators······································ (50)
tMASTER VOLUME control knob············································ (50)
y AUDYSSEY DYNAMIC VOLUME indicator ····························· (46)
u HD AUDIO indicator································································· (41)
iMaster volume indicator
oDisplay························································································ (5)
Q0 Remote control sensor ····························································· (3)
Q1 SOURCE SELECT knob ··························································· (50)
Q2 SOURCE button······································································· (50)
Q3 TUNING PRESET button························································· (52)
Q4 ZONE2/3 / REC SELECT button ············································· (69)
Q5 VIDEO SELECT button ···························································· (36)
Q6 Headphones jack (PHONES)··················································· (50)
Q7 ZONE2 ON/OFF button··························································· (69)
Q8 ZONE3 ON/OFF button··························································· (69)
Q9 INPUT MODE button··························································(16, 37)
W0 MENU button··········································································· (20)
W5W6W7W8W9E0E1E2E3E4E5E6
W4Q6 Q7 Q8 Q9 W0 W3W1 W2
GWith the door openH
W1 Cursor buttons (uio p)······················································· (20)
W2 CH SEL / ENTER button···················································· (20, 59)
W3 RETURN button ······································································· (20)
W4 V.AUX INPUT connectors························································(16)
W5 SETUP MIC jack ······································································· (23)
W6 MULTEQ XT button································································· (45)
W7 DYNAMIC VOLUME button···················································· (46)
bAbout Dynamic Volume
Audyssey Dynamic Volume™ solves the problem of large variations
in volume level between television programs, commercials, and
between the soft and loud passages of movies.
Audyssey Dynamic EQ™ is integrated into Dynamic Volume so that
as the playback volume is adjusted automatically, the perceived
bass response, tonal balance, surround impression, and dialog
clarity remain the same.
bAbout Dynamic EQ
Audyssey Dynamic EQ solves the problem of deteriorating sound
quality as volume is decreased by taking into account human
perception and room acoustics. Audyssey Dynamic EQ works in
tandem with Audyssey MultEQ®XT to provide well-balanced sound
for every listener at any volume level.
W8 SPEAKERS button ··································································· (50)
W9 SURROUND BACK button ······················································ (45)
E0 STATUS button ······································································· (48)
E1 AUDIO DELAY button ····························································· (47)
E2 RESTORER button··································································· (47)
E3 DIRECT/STEREO button ························································· (41)
E4 PURE DIRECT button ······························································ (42)
E5 DSP SIMULATION button······················································· (41)
E6 STANDARD button·································································· (40)
Getting Started


Connections Setup Playback Remote Control Multi-zone Information Troubleshooting Specifications
u yiQ5Q6 oQ0Q1Q2Q4 Q3
wq e r t
qInput signal indicators
wInput signal channel indicators
These light when digital signals are input.
eInformation display
The input source name, surround mode, setting values and other
information are displayed here.
rOutput signal channel indicators
tFront speaker indicator
These light according to the settings of the front A and B
speakers.
yMulti-zone indicators
These light when the power for the respective zone is turned on.
uMaster volume indicator
iAUDYSSEY MULTEQ XT indicator
This lights when MultEQ XT is selected.
oInput mode indicators
Q0 Recording output source indicator
This lights when the REC OUT mode is selected.
Q1 NIGHT indicator
This lights when the night mode is selected.
Q2 RESTORER indicator
This lights when the RESTORER mode is selected.
Q3 AL24 indicator
This lights when AL24 Processing Plus is activated (vpage 72).
Q4 HDMI indicator
This lights when playing using HDMI connections.
Q5 Decoder indicators
These light when the respective decoders are operating.
Q6 Tuner reception mode indicators
This lights according to the reception conditions when the input
source is set to “TUNER”.
• AUTO
This lights when in the auto tuning mode.
• STEREO
In the FM mode, this lights when receiving analog stereo
broadcasts.
• TUNED
This lights when the broadcast is properly tuned in.
Display
Getting Started


Connections Setup Playback Remote Control Multi-zone Information Troubleshooting Specifications
Rear Panel
q w e r t y u i
o
Q1 Q0
Q3 Q2
Q4
Q5 Q6
Q8
Q7
Q5
Q7
qRS-232C connector···································································(19)
wREMOTE CONTROL jacks ························································(19)
eTRIGGER OUT jacks ·································································(19)
rDOCK CONTROL jack ·······························································(13)
tSpeaker terminals (SPEAKERS) ··············································(10)
ySIGNAL GND terminal ·····························································(13)
uAC inlet (AC IN)········································································ (20)
iAC OUTLET ·············································································· (20)
oDigital audio connectors (OPTICAL / COAXIAL)··········· (12 ~ 16)
Q0 SIRIUS connector (SAT TU1)···················································(18)
Q1 COMPONENT VIDEO connectors······································(12, 14)
Q2 XM connector (SAT TU2)·························································(18)
Q3 HDMI connectors···················································· (11, 12, 14, 15)
Q4 VIDEO / S-VIDEO connectors····································(12 ~ 16, 19)
Q5 Analog audio connectors (AUDIO) ································ (12 ~ 16)
Q6 FM/AM antenna terminals (TUNER ANTENNA)····················(17)
Q7 PRE OUT connectors···················································· (10, 16, 19)
Q8 EXT. IN connectors···································································(16)
Getting Started


Connections Setup Playback Remote Control Multi-zone Information Troubleshooting Specifications
Remote Control Unit
qi
o
Q0
Q1
Q4
Q2
Q3
w
e
r
t
y
u
qRemote control signal transmitter ············· (3)
wZone power off button (OFF) ···················· (69)
eCHANNEL buttons······································ (66)
rTUNING buttons········································· (66)
tSystem buttons ·········································· (66)
yREPEAT button ··········································· (66)
uRANDOM button ········································ (66)
iZONE2/ZONE3 select switch ···················· (66)
oZone power on button (ON)······················ (69)
Q0 Input source select buttons······················· (69)
Q1 Volume control buttons (VOLUME) ········· (69)
Q2 Muting button (MUTE) ······························ (69)
Q3 SHIFT button··············································· (66)
nMain remote control unit (RC-1102) nSub remote control unit (RC-1106)
The time for which the backlight stays on can
be changed (vpage 65 “Setting the Time the
Backlight Stays Lit”).
NOTE
• The M. SEL, NET/USB buttons cannot be used.
• The ZONE2 mode QUICK SELECT (1 ~ 3), A.DL,
NGT, INPUT, SPKR, TEST and surround mode
buttons cannot be used.
• The ZONE4 mode cannot be used.
NOTE
The DTU button cannot be used.
The FAVORITES DIRECT PLAY button can function
when the control dock for iPod ASD-3N or ASD-3W
is used.
q
Q0
w
e
t
r
y
u
i
o
Q1
Q3
Q5
Q6
Q4
Q2
Q7
Q8
Q9
W0
W1
W3
W6
W8
W7
W5
W4
W2
qSignal transmission indicator ··················· (61)
wMode select buttons ·································· (61)
eQuick select / System call buttons····· (60, 64)
rDYNAMIC VOLUME button (DYN) ············· (46)
tMultEQ XT button (EQ)······························ (45)
ySurround mode buttons ····················(40 ~ 42)
• Standard button (STD)···························· (40)
• Pure Direct button (PURE) ······················ (42)
• Direct/Stereo button (D/ST)··················· (41)
• DSP simulation button (SIMU) ·············· (41)
• 7CH Stereo button (7CH)························ (41)
uSystem buttons ···································· (62, 63)
iAudio delay button (A. DL)························ (47)
oTuner system buttons ································ (51)
Q0 Input mode button (INPUT)······················· (37)
Q1 Menu / Search button (MENU / SRCH)···· (20)
Q2 Cursor buttons (uio p)························· (20)
Q3 RESTORER button (RSTR) ························· (47)
Q4 HOME button·············································· (61)
Q5 Channel buttons (CH)································· (51)
Q6 Input source select /
Number buttons ··································· (50, 51)
Q7 Remote control signal transmitter ············· (3)
Q8 Device select indicators (DEV1 / DEV2) ··· (61)
Q9 ZONE3 select indicators (Z3)····················· (61)
W0 Night button (NGT) ···································· (47)
W1 Test tone button (TEST) ···························· (28)
W2 Front speaker select button (SPKR) ········· (29)
W3 POWER buttons·········································· (50)
W4 Channel select (CH SEL) /
ENTER button ······································· (20, 59)
W5 Return button (RTN) ·································· (20)
W6 Master volume control buttons (VOL) ····· (50)
W7 Muting button (MUTE) ························ (50, 69)
W8 Main remote control unit setup button
(RC SETUP) ················································· (61)
Getting Started