Denon DRA-697CIHD - Premier AM/FM Stereo User manual

AM-FM STEREO RECEIVER
DRA-697CI
OPERATING INSTRUCTIONS [Upgrade version for HD RadioTM function]
MODE D’EMPLOI [Version mise à jour pour la fonction HD RadioTM]

1
ENGLISH
ENGLISH
Accessories······················································································1
Using the HD RadioTM receiver·······················································1
About the remote control unit ······················································1
Part names and functions······························································1
Display····························································································1
Rear panel ······················································································1
Remote control unit ·······································································2
Contents
This manual includes explanations of functions that are added after
upgrading the receiver.
For instructions on operating the receiver, also refer to the operating
instructions included with the receiver.
Specifications·················································································4
Accessories
Check that the following parts are attached in addition to the main
unit:
qOperating instructions ..............................................................1
wZONE remote control unit (RC-1066) .......................................1
eR03/AAA batteries....................................................................2
rAM loop antenna (for HD Radio broadcasting).........................1
tFM indoor antenna (for HD Radio broadcasting)......................1
e rw t
Getting Started
Using the HD RadioTM receiver
HD Radio technology provides higher quality sound than conventional
broadcasts and allows reception of data services.
•FM sounds as sensational as CDs
•AM sounds as rich as analog FM stereo
•A variety of “data services”, including text-based information-
song title, artist name, album name, genre, etc.
Furthermore, in addition to conventional broadcasts, with HD Radio
broadcasting it is possible to choose from up to 8 multicast programs.
For detailed information on HD Radio technology, please go to
“www.ibiquity.com”.
About the remote control unit
The procedure for inserting the batteries and the operating range of the
ZONE remote control unit (RC-1066) are the same as for the ZONE
remote control (RC-1056) unit included with the set. For details, see
page 2 of the included operating instructions.
Part names and functions
Display
DIGITAL indicator
This lights when an HD broadcast has been received.
Rear panel
ANTENNA terminals
Listening the HD RadioTM broadcasting ········································2
HD Radio auto preset memory ······················································2
HD Radio auto tuning·····································································3
HD Radio manual tuning ································································3
Selecting HD Radio audio programs ··············································3
HD Radio preset memory ······························································3
Recalling HD Radio preset stations················································3
Switching HD information display··················································3
Connecting the antenna terminals ···············································2
Getting Started
Connections
Operation
HD Radio™ technology manufactured under license from iBiquity
Digital Corporation. “iBiquity Digital” and the “HD Radio” and “HD”
symbols are registered trademarks of iBiquity Digital Corporation.
U.S. and Foreign Patents.
(Large size) (Dipole)

Auto tuner presets
Getting Started
2
ENGLISH
ENGLISH
Remote control unit
ZONE select
switch
Volume control
buttons
ZONE ON/OFF
buttons
BAND button
Function
buttons
¢ZONE remote control unit (RC-1066)
Number buttons
(0 ~ 9)
Memory block
buttons (A ~ G)
SEARCH button
An F-type FM antenna cable plug can be connected directly.
Connecting the antenna terminals
Direction of broadcasting station
75 Ω/ohms
Coaxial cable
FM antenna
FM indoor antenna
(for HD Radio broadcasting, supplied)
AM loop antenna
(for HD Radio broadcasting, supplied)
AM outdoor antenna
Ground
Connections
•For details, see page 8 of the included operating instructions.
Operation
Listening to the HD RadioTM broadcasting
Press ENTER.
•The unit automatically begins searching for FM broadcast stations.
When the first FM broadcast station is found, that station is
stored in the auto preset memory at channel A1.
Subsequent stations are automatically stored in order at preset
channels A1 to A8, B1 to B8, C1 to C8, D1 to D8, E1 to E8, F1 to
F8 and G1 to G8 for a maximum of 56 stations.
Channel A1 is tuned in after the HD Radio auto preset memory
operation is completed.
HD Radio auto preset memory
This unit is equipped with a function for automatically searching for
FM broadcast stations and storing them in the HD Radio preset memory.
Use FUNCTION, press TUNER (RC-1052) or HD
RADIO (RC-1066) to select “HD RADIO”.
1
3
Press MENU.
•“Auto Preset” is displayed.
2
•If an FM station cannot be preset automatically due to poor reception,
use the “HD Radio manual tuning” operation to tune in the station,
then preset it using the manual “HD Radio Preset memory” operation.
•To interrupt this function, press <ON/STANDBY>.
¢Default settings
A1 ~ A8 87.5 / 87.9 / 89.1 / 93.3 / 97.9 / 98.1 / 98.9 /
100.1 MHz
B1 ~ B8 101.9 / 102.7 / 107.9 / 90.1 / 90.1 / 90.1 /
90.1 / 90.1 MHz
C1 ~ C8 530 kHz / 600 / 930 / 1000 / 1120 / 1210 /
1400 / 1710 kHz
D1 ~ D8 90.1 MHz
E1 ~ E8 90.1 MHz
F1 ~ F8 90.1 MHz
G1 ~ G8 90.1 MHz
(Large size)
(Dipole)
•To prevent interference, install at least 1
meter away from the antenna connected to
the DRA-697CI’s other AM tuner terminal.
(White)(Black)

Operation Operation
3
ENGLISH
Use FUNCTION, press TUNER (RC-1052) or HD
RADIO (RC-1066) to select “HD RADIO”.
HD Radio auto tuning
HD Radio manual tuning
Press MODE to select “HD Auto” or “Auto”.
•The “DIG.” indicator lights when an HD Radio broadcast is
tuned in.
•HD Auto: Auto tuning stops when an HD Radio program only
is tuned in.
•Auto: Auto tuning stops when an HD Radio or analog
program is tuned in.
Press TUNING.
•Automatic searching begins.
•If tuning does not stop at the desired station, use to the “HD Radio
manual tuning” operation.
Use FUNCTION, press TUNER (RC-1052) or HD
RADIO (RC-1066) to select “HD RADIO”.
Press MODE to select “Manual”.
Press BAND to select “FM” or “AM”.
Press BAND to select “FM” or “AM”.
Press TUNING.
The frequency changes continuously when the button is held in.
1
2
3
4
1
2
3
4
Use the “HD Radio auto tuning” or “HD Radio
manual tuning” operation to tune in the station to be
preset in the memory.
Press MEMORY.
Press <PRESET>, [CHANNEL] or [NUMBER] to select
the desired preset channel (1 to 8).
HD Radio preset memory
Press [MEMORY BLOCK] (Ato G)orSHIFT to select
the desired memory block (A to G).
Press MEMORY again.
•Store the station in the HD Radio preset memory.
1
2
3
4
5
•To preset other channels, repeat steps 2 to 5.
A total of 56 broadcast stations can be preset — 8 stations (channels
1 to 8) in each of blocks A to G.
Selecting HD Radio audio programs
There are nine audio programs (HD1 to HD8 and Analog) for the HD
Radio. There are also data programs for each program.
Press SEARCH or [DDHH]to select programs.
The reception channel switches each time a button is pressed.
When there are multiple audio programs for the selected
channel, “HD1” appears on the display.
“HD” is displayed if there is only one audio program.
Switching HD information display
Use the procedure described at “HD Radio auto
tuning”, “HD Radio manual tuning” or “Recalling
HD Radio preset stations” to tune in a frequency with
an HD Radio station.
Press STATUS to switch the HD Radio reception
information.
qNormal display
1
2
Recalling HD Radio preset stations
Press [MEMORY BLOCK] (Ato G)orSHIFT to select
the memory block.
Press <PRESET>, [CHANNEL] or [NUMBER] to select
the desired preset channel.
1
2
F 1 W X Y Z - F M H D 4
S
k 8 e r B o y
eFrequency and Signal strength display
F 1 F M 1 0 7 . 9 0 M H z
S I G N A L : 6
rStation name and Short / Long name display
W X Y Z - F M
N
o n - S t o p M u s i c
tProgram and Program type display
H D 1
C
l a s s i c a l
yTitle name and Artist name display
S k 8 e r B o y
A V R I L L A V I G N E
uAlbum name and Genre name display
L e t G o
C
l a s s i c a l
ENGLISH
Preset number Station name
Audio program
Title name/Artist name
wFunction name display
H D R A D I O
•When in the manual tuning modes is set, FM analog stereo
broadcasts are received in manual and the “STEREO” indicator
turns off.

4
ENGLISH
ENGLISH
Specifications
¢HD Radio section [FM] [AM]
(note: µV at 75 Ω/ohms, 0 dBf = 1 x 10–15 W)
Receiving Range: 87.5 MHz ~ 107.9 MHz 530 kHz ~ 1710 kHz
Usable Sensitivity: 1.0 µV (11.2 dBf) 18 µV
50 dB Quieting Sensitivity: MONO: 1.6 µV (15.3 dBf)
STEREO: 23 µV (38.5 dBf)
Selectivity: 70 dB
S/N (IHF-A): MONO: 77 dB
STEREO: 72 dB
HD: 80 dB HD: 80 dB
Total Harmonic Distortion (at 1 kHz): MONO: 0.15 %
STEREO: 0.3 %
HD: 0.005 % HD: 0.01 %
¢ZONE remote control unit (RC-1066)
Batteries: R03/AAA Type (Two batteries)
External dimensions: 54 (W) x 115 (H) x 23 (D) mm (2-1/8” x 4-17/32” x 29/32”)
Mass: 80 g (Approx. 2.8 oz) (included batteries)
* For purposes of improvement, specifications and design are subject to change without notice.

Denon Brand Company, D&M Holdings Inc.
Printed in Japan 00D 511 4586 004
TOKYO, JAPAN
www.denon.com