dentalfarm CF-2 User manual

FUME EXHAUST FAN
FOR BURN-OUT FURNACES MOD. CF-2

INSTALLATION
1. Insert the horizontal pipe on the manifold protruding from the rear wall of the
furnace and fix in place by means of the four self-threading screws previously
uloosened (use a cross-section screwdriver).
2. Connect the plug of the feeding cable to the socket at the bottom of the furnace,
thus allowing the software system to start or stop automatically according to the
preset temperatures.
3. Eventually extend the pipe by means of flexible elements connecting it outwards
(the extension pipe is ∅60).

EXPLODED DRAWING AND SPARE PART LIST
No. ITEM DESCRIPTION
1 1211001
Exhaust pipe
2 1211002
Connection plate
3 1211003
Centrifugal fan
4 1211004
Cable with socket

WIRING DIAGRAM
POS. DESCRIZIONE
C Cable with socket
M Motor
DENTALFARM s.r.l.
Via Susa, 9/a - 10138 TORINO - ITALY
TECHNICAL-COMMERCIAL SERVICE - (+39) 011/4346588
AFTER-SALE ASSISTANCE - (+39) 011/4346632
FAX [phone] – Email: [email protected]
Website: www.dentalfarm.it