Denver DPT-770 User manual

DPT-770

DIGITAL PHOTO FRAME User Manual content
Important Safety Instructions .................................................................
Panel Illustration .......................................................................................
Base Operation Illustration
Remote Function......................................................................................
1
3
4
5
7
12
Basic Introduction ..........................................................................................
Basic play .....................................................................................................
Photo Frame setup.................................................................................
DVB Setting Menu ........................................................................
8
TV Installation Menu..............................................................................
9

-1-
Important Safety Instructions Introduction
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings, install in accordance with the instructions.
8) Do not install near any heat sources such as radiations, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized plug. If the provided plug does not fit
into your outlet, consult an electrician for replacement of the obsolete outlet.
10) Protected the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
11) Only use attachments/accessories specified by the manufacturer.
12) Unplug this apparatus during lighting storms or when unused for long periods of time.
13) Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is damaged,
liquid has been spilled or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has been dropped.
14) Mains plug is used as the disconnect device, the disconnect device shall remain
readily operable.
15) The ventilation should not be impeded by covering the ventilation openings with items,
such as newspapers, table-cloth, curtains, etc.
16) No naked flame sources, such as lighted candles, should be placed on the apparatus.
17)Attention should be drawn to the environmental aspects of battery disposal.
18) The use of apparatus in moderate climate.
19)Portable Cart Warning
Aproduct and cart combination should be moved with care. Quick stop,
excessive force, and uneven surface may cause the product and cart
combination to overturn.
WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain
or moisture.
WARNING: The batteries shall not be exposed to excessive heat such as sunshine, fire or
the like. The symbol indicates that dangerous voltages constituting a risk of electric shock
are present within this unit.
The symbol indicates that there are important operating and maintenance
instructions in the literature accompanying this unit.

1. The apparatus shall not be exposed to dripping orSplashingand
that no objects filled withliquids, such as Vases, shall be placed
the apparatus.
2. The mains plug is used as the disconnect device, the disconnect
device shall remain readily operable.
3. To be completely disconnect the power input, themains plug of
apparatus shall be disconnected from the mains.
4. The mains plug of apparatus should not be obstructed or should
be easily accessed during intended use.
5. Battery shall not be exposedto excessive heat such as sunshine,
fire or the like.
-2-
Caution

1
8 9 10 11 12 15 16
1.TFT Display
2.AV OUT Jack
3.PHONE Jack
4.Remote Sensor
5.Bracket
6.POWER Button
7.DC 12V Input Jack
8.FUNCTION Button
9.UP Button
10.DOWN Button
11.LEFT Button
12.RIGHT Button
13.PLAY/PAUSEButton
14.STOP Button
15.CARD IN Slot
16.USB IN Port
17.SPEAKER
18. 75ohm AntennaInput
Panel Illustration
2
3
4
5
13 14
Manufacturer of this unit follows a principle of constant improvement and is not held
responsible for any changes that are made to the unit nor accepts any liabilities for these
changes. Thanks for your choice of our products.
-3-
AVOUT
6
18
7
17
Introduction
OFF
RF
ON
DC IN 12V
PHONE
CARD(SD/MMC/MS)
FUNCTION STOPPLAY/PAUSERIGHT
LEFT
DOWNUP USB

Base Operation Illustration
Basic Introduction
Power supply
Plug one end ofthe adaptor into theDC input jack, thenplug the other endinto AC
wall outlet.
Phone jack
For private listening .inserta headphone or earphoneinto the phone jack.
CAUTION: Listening at highpower for a longmoment could damage users ears.
USB port
Insert a USB datatraveller into the USBport to enjoy theaudio files or pictures.
Card slot
Insert an SD/MMC/MS cardinto the card slotto enjoy the audiofiles or pictures.
AV out jackand connecting
Jack for CVBS outputand left/right channel audiooutput.
RF Port
Insert an antenna toenjoy the television showof DVB-T.
-4-
Introduction
VIDEO
R
L
Connect AVout jack to aTV set as belowpicture.
YELLOW
RED
WHITE
Function Buttons on thePanel
These buttons function isthe same as thecorresponding buttons on theremote
control.For the detail information,please see the followingtexts.

Power on the unitthen enter the mainmenu. The screen showsnine functions, eg:
Photo, Music, Photo +Music,Movie,Setup, Calendar, Clock,Alarm, Auto-Power.
Insert a USB datatraveller or SD/MMC/MS cardfirst, Press NAVIGATION
(UP/DOWN/LEFT/RIGHT) BUTTON to selectone of the followingfunction.
Base Operation Illustration Introduction
Press NAVIGATION buttons to selectphoto option, then pressENTER to confirm
the selection. Afterthe player read itfor several seconds, itbegins to browse the
picture automatically one byone . When photoin auto play offmode, it enters
Thumbnail mode directly.During picture playing, pressSTOP button, thumbnail
mode menu appears onthe screen .The bottomscreen shows the information:
Resolution, created date, rotate,and slide show.
Rotate: Highlight the rotateoption and press ENTERto confirm, then enterthe
rotate mode, there arethree options appear inthe bottom of thescreen including
Rotate it, Reset andreturn. Use NAVIGATION buttons to selectpicture you desired
to rotate, then pressENTER to rotate it.Select reset to restorethe picture. Select
return to back thethumbnail mode.
Side show: Select slideshow option to slidethe picture one byone.
Press NAVIGATION LEFT and NAVIGATION RIGHTbuttons to rotate thepicture
Clockwise and Anticlockwiserespectively.
Press NAVIGATION DOWN button toflip the picture vertically.
Press NAVIGATION UP button toflip the picture horizontally.
BASIC PLAY
-5-
Photo
Press NAVIGATION keys to selectmusic icon in mainmenu, then press ENTERto
confirm. System will enter the default media (USBor card) choosen insetup, after
read out of datain media, it willshow files in media.Ifauto play selected insetup
menu, system will playthe first music fileautomatically, otherwise, youcan select
any files you wantto play.
During playback, all remotekeys for audio areavailable. Press FUNCTION canback
to main menu.
Music
Photo+music
Press this button inmain menu to enterphoto+ music mode, inthis mode to view
picture and listen tomusic in same time.
Press NAVIGATION buttons to selectmovie option, then pressENTER Toconfirm.
After the player readit for several seconds,it begins to playmovie automatically.
Press FUNCTION button toreturn the root menuduring movie playback, press
PLAY/PAUSEto resume playback. Thisunit supports MPEG4 format.
Movie

-6-
Base Operation Illustration Introduction
Calendar
Use NAVIGATION keys to selectCalendar icon and pressENTER to enter Calendar
menu
1.Display: select thisitem to display acalendar
2.Set Date: selectthis item to changedate information with yyyy-mm-ddformat
3.Exit: select thisitem to return tomain menu
Clock
Use NAVIGATION keys to selectClock icon and pressENTER to enter ClockSetting
menu
1. Display: choose CLOCKto display a clockon screen only orchoose CLOCK &
CALENDER to display acalendar with clock onscreen
2. Set Time:select this item tochange time information withhh:mm:ss format
3. Exit: select thisitem to return tomain menu
ALARM
Use NAVIGATION keys to selectAlarm icon andpress ENTER to enterAlarm Setting
menu
1. Enable: choose Onto enable a timeralarm choose Off todisable timer alarm
2. Set Time:set time with hh:mmformat for a timeralarm
3. Exit: select thisitem to return tomain menu
Note 1:when an alarm istriggered, please press STOPkey to disable currentalarm.
If you use otherkeys to stop thealarm, it will betriggered again every 9mins.
Note 2:If you set ENABLEitem as On, itwill be triggered everyday on the sametime.
Auto Power
Use NAVIGATION keys to selectAuto-Power icon andpress ENTER to enterAuto-
Power On/Off setting menu
1. Power On Enable:choose On/Off option toenable/disable timer power on
2. Power Off Enable:choose On/Off option toenable/disable timer power off
3. Set Time:select this item tochange time information forauto power on/off
4. Exit: select thisitem to return tomain menu
Note: timer power on/offmeans when system timereachs the time userset, and timer
power on/off is enabled,system will automatically poweron/off if system isin power
off/on state.
STB
Use Navigation keys toselect STB icon andpress Enter to enter STB settingmenu.
1.Press setup to select System settingmenu.
2.Select DVB setting menu.

2. Auto play
The options of autoplay include photo, musicand movie.
Base Operation Illustration Introduction
3. Custom setup
Logo Type: Itis used to selectthe Default and Favorite.
-7-
4. Exit
Press ENTER to exitthe setup menu.
Media: Set priority fordefault media source.
Select setup option todisplay setup menu. UseNAVIGATION keysto select the desired
item. Then press UP/DOWN/LEFT/RIGHTbutton, the sub-options foreach item will
appear on the rightside of the screen.
Interval time
To browsepicture at interval time.There are several optionsfor you to setas follows:
5sec./10sec./15sec./30./1min./3min.
1.Photo setting
Transition effect
To selectone of the effectswhen changing from onepicture to another: Noeffect/Cover
up/ Cover down/ Coverleft /Cover right/Uncover up/Uncoverdown/Uncover left/Uncover
right/Wipe up/Wipe down/Wipe left/Wiperight/Push up/Push down/Push left/Push
right/blind Vertical/blind horizontal/color Ration Ver/colorRation Hor/random.
Show Type:
Set how the photosshould be prompted.
Fit screen: Will displaythe photos original format
Full screen: Will displaythe photos full screenand cut off thetop and bottom sections.
Browse
to select thumbnail andfile manager mode.
Photo Frame setup

First Time Installation
Enter your regional settings,include your Country,Language, Time Zone.
Please change the country settings in order toyour active country.Then select
<NEXT> to proceed.
Please navigate to <YES> and confirm by pressing the ENTER button. Than
the Auto searchstarts.
Note: The previous channel listwill be deleted andreplaced by the newone.
After all the connections have been made properly, switch on your TV. Make
sure the receiver isconnected to the mainsand press <POWER> to switch the
receiver on. If youare using the receiver for the first time,a First Time
Installation menu will be displayed to guide you throughthe initial setup. Use
the remote controller tofinish the setup.
At the First time installationmenu, select <YES> and press ENTER button on
the remote controller toproceed.
Please press the TV buttonon the remote control toappear the menu, where you
can change to DVB. Navigatewith the UP or DOWNbutton the DVB and activate
DVB by pressing the ENTERbutton.
If you use DVB-T thefirst time, than the systementered to the First Time Installation.
-8-
TV Installation Menu