Denver TRC-1490 User manual

INSTRUCTION MANUAL TRC-1490
Wireless Indoor and Outdoor Weather Station

Words in the images:
Image English Other Language
FRONT VIEW
PM INDICATOR
TIME
DATE / MONTH
MAXIMUM / MINIMUM ICONS
LOW BATTERY OUTDOOR SENSOR
INDOOR TEMPERATURE
- / (°C/°F)
SET / ALARM
SNOOZE
+ / CHANNEL / ALARM ON-OFF
OUTDOOR TEMPERATURE
WIRLESS TRANSMISSION ICON
RF SENSOR CHANNEL
WEATHER FORECAST ICONS
ALARM ON
REAR
VIEW
MAX / MIN
RESET
INSERT 2 X AAA BATTERIES
SIDE VIEW
FOLDING STAND
OUTDOOR TEMPERATURE
SENSOR
LED
RESET
STAND
INSERT 2 X AAA BATTERIES
CHANNEL 1
CHANNEL 2
CHANNEL 3
QUICK START GUIDE
1. Slide the battery cover at the rear of your indoor unit open.
2. Insert 2 x AAA batteries in the battery compartment; observe correct polarity (+/-) as printed inside

1. Press and hold SET / ALM SET for 2 seconds, the time digits change to “2008 YR” and start
flashing. Press ▲/▼to set the year.
2. Press SET / ALM SET again, the month digits start flashing. Press ▲/▼to set the month.
3. Press SET / ALM SET again, the date digits start flashing. Press ▲/▼to set the date.
4. Press SET / ALM SET again, the time digits change to “24 Hr”, press ▲/▼to select “12 Hr”
time format or “24 Hr” time format. When selecting “12 Hr”, the AM / PM icon will be displayed.
5. Press SET / ALM SET again, the time digits change to “00”, press ▲/▼to select your time
zone.
6. Press SET / ALM SET again, the time digits “0:00” show and the hour digits start flashing.
Press ▲/▼to set the hours.
7. Press SET / ALM SET again, the minute digits start flashing. Press ▲/▼button to set the
minutes.
8. Press SET / ALM SET to return to normal mode, or wait 30 seconds for the unit to return
automatically.
SET ALARM
Press SET / ALM SET, the time digits change to the alarm time digits “AM 7:00 AL”. Press and hold
SET / ALM SET for 2 seconds, the hour digits start flashing. Press ▲/▼to set your desired alarm time
hour.
Press SET / ALM SET again, the alarm minute digits start flashing. Press ▲/▼to set the alarm
minutes.
Press SET / ALM SET again, time digits change to “05” and start flashing. Press ▲/▼to set the
snooze duration between 1 and 20 minutes.
Press SET / ALM SET to return to normal mode, or wait 30 seconds for the unit to return
automatically.
TURN ALARM ON OR OFF
Press SET / ALM SET to display the alarm time. When the alarm time is displayed, press ▲to turn
on / off the daily alarm. When the alarm function is turned on, the icon appears between the hour
and minute digits.
SNOOZE FUNCTION
When your alarm turns on, the clock sounds a beep to wake you up. The icon starts flashing.
1) Press SNOOZE to stop the alarm temporarily, the icon keeps flashing. The alarm will beep
again after 5 minutes.

When minimum indoor/outdoor temperature and humidity are displayed, press and hold MIN to clear
the minimum values; the unit will start recording and displaying updated data again.
USE INSTRUCTIONS FOR THE WEATHER STATION
There are four types of weather display on your weather station:
SUNNY
SUNNY AND CLOUDY
CLOUDY
RAINY
Please note: For better use of your weather station, place it in a location with air circulation, e.g. close
to an open window. Placing it in an air-conditioned environment will affect its accuracy.
After your weather station is powered up, it will take around 24 hours to stabilize. The weather icons
on the display give reference to the next 6-12 hours weather conditions. It may not match with the
current weather condition outside.
SYNCHRONIZE CLOCK WITH MULTIPLE OUTDOOR SENSORS

discharge or interferences from other devices. Press RESET on the rear of the unit. Your unit will
be reset to the factory settings (time and calendar) and you need to set time and calendar again.
2. In case the outdoor temperature shows “--“:
2.1 Press ▲/ CHANNEL (ALM On-Off) to display the correct channel, “CH1” is your default
channel;
2.2 If the outdoor temperature shows “CH1”, press and hold ▲/ CHANNEL (ALM ON-OFF) for
2 seconds. The outdoor temperature will be displayed in approx 1 minute;
2.3 If above procedures do not work, repeat 2.2), bring in the outdoor sensor and press RESET
on the outdoor sensor.
Please note: If you observe a “Low Battery” icon on the lower left side of the LCD (which means your
outdoor sensor has a low battery level), replace the batteries of the sensor.
CARE AND MAINTENANCE
1. Do not expose the unit to extreme temperatures, water or direct sunlight.
2. Avoid contact with corrosive materials.
3. Do not subject the unit to excessive force, dust or humidity.
4. Do not open the casing or tamper with components of the unit.
SPECIFICATIONS
Indoor Temperature Range -10°C to +50°C (+14.2°F to +122°F)
Outdoor Temperature Range -50°C to + 70°C (-58°F to +158°F)
Out of Range Display Temperature: HH.H / LL.L
Outdoor Temperature Interval 1 minute
Temperature Resolution 0.1° C
Alarm Duration 2 minutes
Transmission Frequency 433Mhz
Transmission Distance Up to 30 meters (no obstructions)
Electric and electronic equipment and included batteries contains materials, components and
substances that can be hazardous to your health and the environment, if the waste material
(discarded electric and electronic equipment and batteries) is not handled correctly.
Electric and electronic equipment and batteries is marked with the crossed out trash can symbol, seen
below. This symbol signifies that electric and electronic equipment and batteries should not be
disposed of with other household waste, but should be disposed of separately.

ALL RIGHTS RESERVED
COPYRIGHT DENVER ELECTRONICS A/S
WWW.DENVER-ELECTRONICS.COM